journal article·2020-08

Effects of H2O2, Cu(NO3)2 and HF temperatures on surface texturization of diamond-wire-sawn multicrystalline silicon wafer

Shing-Dar Wang, Sung-Yu Chen, Shih-Peng Hsu, Pin-Quan Shi, Chi-Guang Chen

Publisher page

Abstract

Abstract Previous studies have considered the same temperature for all components of the silicon etching solution, and the effect of the temperature of the individual components on the etching results has not been explored. In the present study, a diamond-wire-sawn (DWS) multi-crystalline silicon wafer was etched twice for 50 s each time. The initial temperature of HF was selected to be room temperature, 55 and 66 °C, whereas those of H2O2 and Cu(NO3)2 varied between 40 and 70 °C, 40 and 72 °C, respectively. The temperature of the three components of the solution was allowed to change over time. The effects of H2O2, Cu(NO3)2, and HF temperatures on the etch morphology, reflectivity, and energy conversion efficiency of the fabricated solar cells were investigated. The saw marks of a DWS wafer were determined to be the preferred nucleation sites for the formation of the inverted pyramid (IP) structure. The optimum temperatures for etching Si to obtain a large area of IP structure were ~72 °C for Cu2+, ~25 °C for HF, and ~55 °C for H2O2. The strong isotropic etching ability of high-temperature HF caused the silicon crystal surface to deviate from the IP structure and left many recombination centers on the surface. A wafer with an IP structure on the entire surface exhibited the highest energy conversion efficiency of 18.21%. A simple wet-chemical post-processing step is expected to reduce the recombination centers and improve the energy conversion efficiency of the fabricated solar cell.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nanowire Synthesis and Applications · Silicon Nanostructures and Photoluminescence · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. On the nature and removal of saw marks on diamond wire sawn multicrystalline silicon wafers10.1016/j.mssp.2014.06.049 ↗
2. Metal-assisted chemical etching of silicon: a review10.1002/adma.201001784 ↗
3. Maskless inverted pyramid texturization of silicon
4. Micro-structured inverted pyramid texturization of Si inspired by self-assembled Cu nanoparticles10.1039/C6NR08126F ↗
5. 18.87%-efficient inverted pyramid structured silicon solar cell by one-step Cu-assisted texturization technique10.1016/j.solmat.2017.03.017 ↗
6. Difference in anisotropic etching characteristics of alkaline and copper based acid solutions for single-crystalline Si10.1038/s41598-018-21877-x ↗
7. High efficient solar cells by the Ag/Cu-assisted chemical etching process on diamond-wire-sawn multicrystalline silicon10.1109/JPHOTOV.2016.2631304 ↗
8. Anti-reflection layers fabricated by a one-step copper assisted chemical etching with inverted pyramidal structures intermediate between texturing and nanopore-type black silicon10.1039/C4TA02006E ↗
9. Progress and mechanism of Cu assisted chemical etching of silicon in a low Cu2+ concentration region10.1149/2.0191508jss ↗
10. Porous silicon templates prepared by Cu-assisted chemical etching10.1016/j.matlet.2013.12.093 ↗
11. Efficient nanostructured ‘black’ silicon solar cell by copper-catalyzed metal-assisted etching10.1002/pip.2562 ↗
12. Efficient black silicon solar cell with a density-graded nanoporous surface: optical properties, performance limitations, and design rules10.1063/1.3231438 ↗
13. An 18.2%-efficient black-silicon solar cell achieved through control of carrier recombination in nanostructures10.1038/nnano.2012.166 ↗
14. 18.88%-efficient multi-crystalline silicon solar cells by combining Cu catalyzed chemical etching and post-treatment process10.1016/j.solener.2018.04.049 ↗
15. The study of the defect removal etching of black silicon for diamond wire sawn multi-crystalline silicon solar cells10.1016/j.solener.2018.04.066 ↗
16. MACE nano-texture process applicable for both single- and multi-crystalline diamond-wire sawn Si solar cells10.1016/j.solmat.2018.10.015 ↗
17. Versatile strategies for improving the performance of diamond wire sawn mc-Si solar cells10.1016/j.solmat.2016.04.014 ↗
18. Texturing a pyramid-like structure on a silicon surface via the synergetic effect of copper and Fe(III) in hydrofluoric acid solution10.1016/j.apsusc.2016.03.021 ↗
19. Broadband spectral response of diamond wire sawn mc-Si solar cell with omnidirectional performance and improved appearance10.1016/j.solmat.2017.12.039 ↗
20. 18.45%-Efficient multi-crystalline silicon solar cells with novel nanoscale pseudo-pyramid texture10.1002/adfm.201401589 ↗
21. Improved black silicon for photovoltaic applications10.1002/aenm.201201038 ↗