journal article·2021-10Open access

Revised parametrization of the recombination velocity at SiO2/SiNx-passivated phosphorus-diffused surfaces

Andreas Wolf, Julian Egle, Sebastian Mack, Hannes Höffler, David Herrmann, Sabrina Lohmüller, Jörg Horzel, Andreas Fell

Abstract

Abstract We investigate the effective surface recombination velocity Seff of alkaline textured, Phosphorus-diffused and thermal SiO2/SiNx passivated surfaces with an emphasis on the impact of the thermal oxidation temperature. The application of a recent calibration procedure for the carrier lifetime measurements enables a precise determination of the dark saturation current density. The experimental results include 25 diffusion/oxidation process combinations that cover a wide range of final surface concentration levels Ns between 3⋅1020 cm−3 and 1⋅1019 cm−3, using oxidation temperatures Tox from 650 °C to 900 °C. This yields a data set that enables a revision of the commonly applied parameterization of the effective surface recombination velocity of this passivation scheme using numerical simulation. In addition, the impact of fixed surface charges is modeled for separating field effect and chemical passivation properties. Also, the role of the oxidation temperature on the passivation quality is investigated.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Silicon Nanostructures and Photoluminescence

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. “Passivated emitter and rear cell – devices, technology, and modelling10.1063/5.0005090 ↗
2. Surface recombination velocity of highly doped n-type silicon10.1063/1.363250 ↗
3. Surface recombination velocity of phosphorus-diffused silicon solar cell emitters passivated with plasma enhanced chemical vapor deposited silicon nitride and thermal silicon oxide10.1063/1.1350633 ↗
4. Studies of diffused phosphorus emitters: saturation current, surface recombination velocity, and quantum efficiency10.1109/16.46368 ↗
5. Precise parameterization of the recombination velocity at passivated phosphorus doped surfaces10.1063/1.4939960 ↗
6. “Numerical modeling of highly doped Si:P emitters based on Fermi–Dirac statistics and self-consistent material parameters: P emitters based on Fermi-Dirac statistics and self-consistent material parameters10.1063/1.1501743 ↗
7. Accounting for the dependence of coil sensitivity on sample thickness and lift-off in inductively coupled photoconductance measurements10.1109/JPHOTOV.2019.2942484 ↗
8. Dependence of coil sensitivity on sample thickness in inductively coupled photoconductance measurements
9. Carrier-diffusion corrected J0-analysis of charge carrier lifetime measurements for increased consistency10.1016/j.solmat.2015.06.043 ↗
10. Finite-temperature full random-phase approximation model of band gap narrowing for silicon device simulation10.1063/1.368545 ↗
11. Fell
12. Improved quantitative description of Auger recombination in crystalline silicon10.1103/PhysRevB.86.165202 ↗
13. On retrograde phosphorus concentration depth profiles in silicon after POCl3 diffusion and thermal oxidation
14. Synopsys, Sentaurus Device User Guide H-2013.03.
15. Fixed charge density in silicon nitride films on crystalline silicon surfaces under illumination
16. Silicon surface passivation by thin thermal Oxide/PECVD layer stack systems10.1109/JPHOTOV.2011.2173299 ↗
17. Nicollian · 2002
18. Niewelt T., Steinhauser B., Richter A., Veith-Wolf B., Fell A., Hammann B., Grant N.E., Black L., Tan J., Murphy J.D., Schmidt J., Schubert M.C., and Glunz S.W., Reassessment of the intrinsic bulk recombination in crystalline silicon, Sol. Energy Mater. Sol. Cells, to be submitted.