Engineering of a-Si:H device stability by suitable design of interfaces
Source abstract
Abstract
Abstract Where a-Si:H pin devices are concerned, one of the main obstacles regarding improved performance is device stability, usually attributed to adverse behaviour at various interfaces within the device. Several attempts have been made to overcome this problem, such as the use of blocking layers at the interfaces. Although these have led to some improvements in device performance, most of the problems associated with device stability remain. This is mainly due to the defects at the interfaces, since the blocking layers (silicon alloys with carbon, nitrogen or oxygen) usually have a high density of bulk states, in comparison to intrinsic a-Si:H films. In this paper, we present a method that seems to be capable of improving device stability. It consists of performing a controlled removal of oxide interlayers at the interfaces, by an appropriate etching process. This enables the production of highly smoothed interfaces, and reduces possible cross-contamination of the i-layer from the adjacent doped layers. This amounts to a new design of typical pin devices, in which thin absorber layers are placed at the p/i and i/n interfaces. Their purpose is to trap most of the impurity atoms diffused from the doped layers, after which they are removed by appropriate etching. The fabrication of the absorbers (sacrificial layers), the nature of the etching and the tailoring of the defect profile at the interfaces will be discussed, including the performance exhibited by the resulting devices.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thin-Film Transistor Technologies · Silicon and Solar Cell Technologies · Silicon Nanostructures and Photoluminescence
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Schropp · 1998 · 69
2. Catalano · 1991 · Vol. 1 · 9
3. Fantoni · J. Math. Comput. Simulation · 1999 · 49 · 38110.1016/S0378-4754(99)00055-5 ↗
4. Schropp · 1995 · Vol. 44–46 Part 2 · 853
5. Maruyama · 1995 · Vol. 44–46 Part 2 · 863
6. Guha · 1999 · Vol. 37 · 331
7. Martins · Vacuum · 2000 · 56 · 2510.1016/S0042-207X(99)00158-X ↗
8. Queeney · J. Appl. Phys. · 2000 · 87 · 132210.1063/1.372017 ↗
9. Martins · J. Appl. Phys. · 1995 · 75 · 348110.1063/1.359980 ↗
10. Tauc · Sol. Energy Mater. · 1982 · 8 · 25910.1016/0165-1633(82)90068-5 ↗
11. E. Fortunato, A. Malik, A. Sêco, I. Ferreira, A. Maçarico, G. Lavareda, R. Martins, J. Non-Cryst. Solids (1998) 227, 1230.10.1016/S0022-3093(98)00250-6 ↗
12. H. Águas, E. Fortunato, A. Cabrita, V. Silva, Pedro M.N. Tonello, R. Martins, MRS Symp. Amorphous and Microcryst. Silicon Tech., Vol. 609, 2000, pp. A12.1.1–A12.1.6.10.1557/PROC-609-A12.1 ↗
13. S. Grove, Physics and Technology of Semiconductor Devices, Wiley, NY, 1967.
14. G.S. Oehrlein, in: P.F. Williams (Ed.), Plasma Processing of Semiconductors, Applied Science Series, Vol. 336, 1997, pp. 73–88.10.1007/978-94-011-5884-8_4 ↗
15. Charvet · J. Appl. Phys. · 1999 · 85 · 403210.1063/1.370307 ↗
16. J.P.M. Schmitt, J. Meot, P. Roubeau, P. Parrens, Eighth European Community Photovoltaic Solar Energy Conference Proceedings, Florence, 1988, pp. 964–968.
17. Catalano · J. Appl. Phys. · 1988 · 63 · 122010.1063/1.339985 ↗