Co-annealing of PECVD boron emitters and poly-Si passivating contacts for leaner TOPCon solar cell fabrication
Source abstract
Abstract
This study investigates the feasibility of a single-step annealing process for tunnel oxide passivating contact (TOPCon) solar cell fabrication to replace the conventional two-step approach. We present a novel method using a single thermal treatment to simultaneously form the boron emitter at the front and poly-Si-based passivating contact at the rear of the device. Both are based on layers deposited by plasma-enhanced chemical vapor deposition (PECVD). First, we tailor the boron emitter profile. We achieved boron emitter profiles with surface concentrations ranging from 3 × 1 0 19 to 1 × 1 0 20 cm − 3 and depths between 100 and 600 nm by adjusting the deposition parameters and annealing conditions. Secondly, we show that n -type poly-Si layers are suitable for co-annealing when an additional N 2 O plasma treatment is applied to tunnel oxide formed by exposure to UV-O 3 . This approach enables the achievement of i V o c up to 720 mV and contact resistivity ≤ 100 m Ω c m 2 . Finally, we demonstrate the viability of the co-annealing process with a proof-of-concept solar cell, which shows a promising power conversion efficiency of 21%.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Integrated Circuits and Semiconductor Failure Analysis · Photovoltaic System Optimization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. SIPOS heterojunction contacts to silicon
2. A 720 mV open circuit voltage SiO x : c -Si:Sio x double heterostructure solar cell10.1063/1.96331 ↗
3. A polysilicon emitter solar cell10.1109/EDL.1985.26264 ↗
4. Generation 3: Improved performance at lower cost
5. Passivated rear contacts for high-efficiency n-type Si solar cells providing high interface passivation quality and excellent transport characteristics10.1016/j.solmat.2013.09.017 ↗
6. Recombination behavior and contact resistance of n+ and p+ poly-crystalline Si/mono-crystalline Si junctions10.1016/j.solmat.2014.06.003 ↗
7. ITRPV · 2024
8. 25.1%-efficient monolithic perovskite/silicon tandem solar cell based on a p-type monocrystalline textured silicon wafer and high-temperature passivating contacts10.1021/acsenergylett.9b00377 ↗
9. BBr3 diffusion: process optimization for high-quality emitters with industrial cycle times
10. Technology evolution of the photovoltaic industry: Learning from history and recent progress
11. Concurrently preparing front emitter and rear passivating contact via continuous PECVD deposition plus one-step annealing for high-efficiency tunnel oxide passivating contact solar cells10.1002/solr.202201082 ↗
12. Emitter formation with boron diffusion from PECVD deposited boron-doped silicon oxide for high-efficiency TOPCon solar cells10.1016/j.solmat.2022.111713 ↗
13. NREL · 2024
14. Simultaneous boron emitter diffusion and annealing of tunnel oxide passivated contacts via rapid vapor-phase direct doping10.1109/JPHOTOV.2022.3190772 ↗
15. Y. Schiele, S. Fahr, S. Joos, G. Hahn, B. Terheiden, Study on Boron Emitter Formation by BBr3 Diffusion for n-type Si Solar Cell Applications, in: 28th European Photovoltaic Solar Energy Conference, 2013.
16. Optimization of BBr3 diffusion processes for n-type silicon solar cells
17. Green-laser-doped selective emitters with separate BBr3 diffusion processes for high-efficiency n-type silicon solar cells10.1016/j.solmat.2020.110462 ↗
18. E. Krassowski, Technological Evolution of LECO Process and Working Principle on TOPCon Cells, SiliconPV, 2024.
19. X. Meng, Tongwei N-Type Passivated Contact Cell,from R&D to Mass Production, SiliconPV, 2024.
20. A. Mette, Q.ANTUM NEO with LECO Exceeding 25.5% Cell Efficiency, SiliconPV, 2024.10.1016/j.solmat.2024.113110 ↗
21. Highly insulating ultrathin SiO2 film grown by photooxidation10.1063/1.1597940 ↗
22. Simple cleaning and conditioning of silicon surfaces with UV/Ozone sources10.1016/j.egypro.2014.08.067 ↗
23. Ultrathin silicon oxide prepared by in-line plasma-assisted N2O oxidation (PANO) and the application for n-type polysilicon passivated contact10.1016/j.solmat.2019.110389 ↗
24. Firing-stable PECVD SiO x N y/n-poly-Si surface passivation for silicon solar cells10.1021/acsaem.1c00265 ↗
25. Crystalline silicon solar cells with coannealed electron- and hole-selective SiC x passivating contacts10.1109/JPHOTOV.2018.2866189 ↗
26. Silicon-rich silicon carbide hole-selective rear contacts for crystalline-silicon-based solar cells10.1021/acsami.6b12714 ↗
27. Development and characterization of N2O-plasma oxide layers for high-temperature p-type passivating contacts in silicon solar cells10.1021/acsami.4c10612 ↗
28. Design, fabrication, and analysis of 17-18-percent efficient surface-passivated silicon solar cells10.1109/T-ED.1984.21574 ↗
29. Rapid thermal processing for front and rear contact passivation
30. Correlation between the open-circuit voltage and recombination loss at metal-silicon interfaces of crystalline silicon solar cells10.1016/j.solmat.2020.110519 ↗
31. Analysis of aluminum back surface field at different wafer specifications in crystalline silicon solar cells10.1016/j.cap.2016.05.016 ↗
32. Increased reliability for J0-analysis by QSSPC10.1016/j.egypro.2014.08.087 ↗
33. Carrier-diffusion corrected J0-analysis of charge carrier lifetime measurements for increased consistency10.1016/j.solmat.2015.06.043 ↗
34. Thermal activation and deactivation of grown-in defects limiting the lifetime of float-zone silicon10.1002/pssr.201600080 ↗
35. Libraro · 2024
36. Comparison of different types of interfacial oxides on hole-selective p+-poly-Si passivated contacts for high-efficiency c-Si solar cells10.1016/j.solmat.2020.110487 ↗
37. Enhanced “tail” diffusion of phosphorus and boron in silicon: Self-interstitial phenomena10.1063/1.96980 ↗
38. Simulation of boron, phosphorus, and arsenic diffusion in silicon based on an integrated diffusion model, and the anomalous phosphorus diffusion mechanism10.1063/1.366030 ↗
39. Contactless determination of current–voltage characteristics and minority-carrier lifetimes in semiconductors from quasi-steady-state photoconductance data10.1063/1.117723 ↗
40. S. Bowden, A. Rohatgi, Rapid and Accurate Determination of Series Resistance and Fill Factor Losses in Industrial Silicon Solar Cells, in: 27th European Photovoltaic Solar Energy Conference, 2001.
41. A freeware 1D emitter model for silicon solar cells
42. K.R. McIntosh, P.P. Altermatt, K.C. Fong, M.D. Abbott, S.C. Baker-Finch, L.E. Black, T.J. Ratcliff, An Examination of Three Common Assumptions Used to Simulate Recombination in Heavily Doped Silicon, in: 28th European Photovoltaic Solar Energy Conference, 2013.
43. Accuracy of analytical expressions for solar cell fill factors10.1016/0379-6787(82)90057-6 ↗
44. Improved quantitative description of Auger recombination in crystalline silicon10.1103/PhysRevB.86.165202 ↗
45. Reassessment of the limiting efficiency for crystalline silicon solar cells10.1109/JPHOTOV.2013.2270351 ↗
46. Impact of rapid thermal processing on bulk and surface recombination mechanisms in FZ silicon with fired passivating contacts10.1016/j.solmat.2022.111647 ↗
47. Impact of rapid thermal processing on bulk lifetime and surface recombination velocity of crystalline silicon with passivating tunnel oxide contacts10.1002/pip.3894 ↗
48. Excellent boron emitter passivation for high-efficiency Si wafer solar cells using AlOx/SiNx dielectric stacks deposited in an industrial inline plasma reactor: Excellent boron emitter passivation for high-efficiency Si wafer solar cells