journal article·2025-08

Enhancing Sb2(Se, S)3 solar cell performance via air annealing for interfacial defect passivation and absorber Property optimization

Junhui Lin, Ausaf Ali Shah, Bandar Ali Al-Asbahi, Xiaofang Zhao, Huazhu Liu, Shengxin Lin, Bushra Jabar, Muhammad Ishaq

Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Phase-change materials and chalcogenides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Light-absorber engineering induced defect passivation for efficient antimony triselenide solar cells10.1016/j.jallcom.2024.175130 ↗
2. Perspective of enviromentally friendly antimony selenide-based solar cell10.1063/5.0214349 ↗
3. Improved open-circuit voltage of Sb2Se3 thin-film solar cells via interfacial sulfur diffusion-induced gradient bandgap engineering10.1002/solr.202100419 ↗
4. Magnetron sputtered Sb2Se3-based thin films towards high performance quasi-homojunction thin film solar cells10.1016/j.solmat.2019.110154 ↗
5. Chemical etching induced surface modification and gentle gradient bandgap for highly efficient Sb2(S,Se)3 solar cell10.1016/j.apsusc.2021.152193 ↗
6. Nanorod-textured Sb2(S,Se)3 bilayer with enhanced light harvesting and accelerated charge extraction for high-efficiency Sb2(S,Se)3 solar cells10.1016/j.cej.2022.135341 ↗
7. Controllable solution-phase epitaxial growth of Q1D Sb2(S,Se)3/CdS heterojunction solar cell with 9.2% efficiency10.1002/adma.202104346 ↗
8. A review of Sb2Se3 photovoltaic absorber materials and thin-film solar cells10.1016/j.solener.2020.03.009 ↗
9. Structural and optical characteristics of antimony selenosulfide thin films prepared by two-step method10.1007/s40042-022-00521-y ↗
10. Preparation and characterization of Sb2(SXSe1-X)3 thin films deposited by pulsed laser deposition10.1007/s10854-022-09296-1 ↗
11. High efficiency Sb2(S,Se)3 thin-film solar cells by substrate-temperature-controlled vapor transport deposition method
12. Single-source thermal evaporation converts anion controllable Sb2(S,Se)3 film for fabricating high-efficiency solar cell10.1007/s40843-023-2479-x ↗
13. Manipulating the electrical properties of Sb2(S,Se)3 film for high-efficiency solar cell10.1002/aenm.202002341 ↗
14. Efficient Sb2(S,Se)3 solar cells via monitorable chemical bath deposition10.1039/D2TA01465C ↗
15. Pulsed laser deposition of antimony selenosulfide thin film for the efffcient solar cells10.1063/1.5139467 ↗
16. Controllable vapor transport deposition of efficient Sb2(S,Se)3 solar cells via adjusting evaporation source area10.1016/j.jallcom.2022.164320 ↗
17. Rapid thermal selenization enhanced efficiency in Sb2Se3 thin film solar cells with superstrate configuration10.1021/acsami.4c19606 ↗
18. Solvent-assisted hydrothermal deposition approach for highly-efficient Sb2(S,Se)3 thin-film solar cells10.1002/aenm.202300391 ↗
19. Selenium-rich Sb2(S,Se)3 thin films deposited via sequential chemical bath deposition for high-efficiency solar cells
20. CZTS-based materials and interfaces and their effects on the performance of thin film solar cells10.1002/pssr.201409219 ↗
21. Heterojunction annealing enabling record open-circuit voltage in antimony triselenide solar cells10.1002/adma.202109078 ↗
22. Cu2ZnSnS4 solar cells with over 10% power conversion efficiency enabled by heterojunction heat treatment10.1038/s41560-018-0206-0 ↗
23. Device postannealing enabling over 12% efficient solution-processed Cu2ZnSnS4 solar cells with Cd2+ substitution10.1002/adma.202000121 ↗
24. Thin-film Sb2Se3 photovoltaics with oriented one-dimensional ribbons and benign grain boundaries10.1038/nphoton.2015.78 ↗
25. Orientation engineering in low-dimensional crystal-structural materials via seed screening10.1002/adma.201903914 ↗
26. Stable 6%-efficient Sb2Se3 solar cells with a ZnO buffer layer10.1038/nenergy.2017.46 ↗
27. Insight into the role of post-annealing in air for high efficient Cu2ZnSn(S, Se)4 solar cells10.1016/j.solmat.2018.03.029 ↗
28. Air-annealing of Cu(In, Ga)Se2/CdS and performances of CIGS solar cells10.1016/j.apsusc.2017.07.212 ↗
29. Improving the performance of Sb2Se3 thin film solar cells over 4% by controlled addition of oxygen during film deposition10.1002/pip.2627 ↗
30. Unveiling the influence of absorber thickness on efficient Sb2(S,Se)3 solar cells through controlled chemical bath deposition
31. Templated growth and passivation of vertically oriented antimony selenide thin films for high-efficiency solar cells in substrate configuration10.1002/adfm.202110032 ↗
32. HTL free Sb2(S, Se)3 solar cells with an optimal detailed balance band gap10.1021/acsami.1c10758 ↗
33. Insight into the role of air-annealing Cu2ZnSnS4 precursor films in improving efficiency of Cu2ZnSn(S,Se)4 solar cells10.1016/j.jallcom.2022.167308 ↗
34. Crystallographic orientation control and defect passivation for high efffcient antimony selenide thin-film solar cells, Mater
35. Influence of Sb addition on the structural and optical characteristics of thermally vacuum evaporated SbXSe1-X thin films10.1016/j.jallcom.2016.10.042 ↗
36. Bandgap grading via sputtering and post-selenization using SeS2 powder enabling Sb2(S,Se)3 solar cells with 7.1% efficiency10.1016/j.solmat.2023.112464 ↗
37. Vapor transport deposition of antimony selenide thin fflm solar cells with 7.6% efffciency10.1038/s41467-018-04634-6 ↗
38. Thermal evaporation and characterization of superstrate CdS/Sb2Se3 solar cells10.1063/1.4874878 ↗
39. Spatial bandgap tailoring via a novel injection chemical bath deposition enables highly efffcient carbon-based Sb2(S,Se)3 thin film solar cells10.1016/j.cej.2023.146722 ↗
40. Sb2S3 seed-mediated growth of low-defect Sb2S3 on a TiO2 substrate for efficient solar cells, A.C.S. Appl
41. Efficient double buffer layer Sb2(SexS1-x)3 thin film solar cell via single source evaporation10.1002/solr.201800144 ↗