Highly conductive coated wires for interconnection of solar cells with TECC-wire technology
Source abstract
Abstract
TECC-Wire (thermoplastic and electrically conductive coated wire) represents a promising interconnection technology for temperature sensitive solar cells. TECC-Wire uses round copper wires (160–300 μm) coated with a thermoplastic polymer layer (10–20 μm), filled with electrically conductive particles. This study presents a new wire coating formulation based on a polyamide-type wire enamel (Voltatex® 8609 ECO, melting temperature 180 °C), filled with 12 vol% silver resulting in a conductivity of 480 S/cm. Single half-cut M6 heterojunction (SHJ) solar cells were contacted with the manufactured wires using a laboratory scale stringing machine. Peel tests were performed to characterize the adhesion of the wires to the cell surface, module performance was evaluated using electroluminescence (EL) imaging and current-voltage (IV) measurements, damp heat (DH) tests were used to evaluate the long-term stability of the modules. The wires adhere well to the cells with a peel force of more than 1.5 N/mm, and the highly conductive coating has proven to be robust when contacted with different pressure, which might be beneficial for a reliable high throughput solar module production. The obtained fill factor FF = 81.25 ± 0,12 % is similar to those achieved for solar modules connected via standard soldering techniques IEC standard DH tests confirmed that, the modules exhibiting a power loss of less than 5 % after 1000 h of storage at +85 °C and 85 % relative humidity. These results are very encouraging for further development of the technology towards a low temperature, solder-free, low cost and robust cell interconnection technology. • Wires coated with electrically conductive thermoplastic adhesives. • Electrically conductive thermoplastic adhesive. • Formulation of electrically conductive wire enamel. • Wire coating process.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · solar cell performance optimization · Photovoltaic System Optimization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Fischer · 2023 · 27
2. Solar cell improvement by using a multi busbar design as front electrode10.1016/j.egypro.2012.07.056 ↗
3. High-efficiency silicon heterojunction solar cells: a review10.1515/green-2011-0018 ↗
4. A review of interconnection technologies for improved crystalline silicon solar cell photovoltaic module assembly10.1016/j.apenergy.2015.04.120 ↗
5. Advanced metallization enabled by smart-wire interconnection for silicon heterojunction cells
6. Towards sustainable silicon PV manufacturing at the terawatt level
7. Y. Zemen, L. Podlowski, S. Wendlandt, J. Stegmann, Thermoplastically and Electrically Conductive Coated Wire for the Interconnection of Temperature-Sensitive Solar Cells, IEEE 48th Photovoltaic Specialists Conference (PVSC) 480–485. https://doi.org/10.1109/PVSC43889.2021.9518596.10.1109/PVSC43889.2021.9518596 ↗
8. TECC-wire: a new low-temperature technology for the interconnection of solar cells
9. Interconnection technology for the next generation of (temperature- sensitive) solar cells such as heterojunction and C-Si/perovskite tandem
10. Hagedorn · 2016 · 129
11. NormenBibliothek Online, IEC 61215-2:2021, Terrestrische Photovoltaik(PV)-Module – Bauarteignung und Bauartzulassung, https://www.normenbibliothek.de/vde-xaveropp/normenbibliothek/start.xav#__normenbibliothek__%2F%2F*%5B%40attr_id%3D%270100671%27%5D__1709026542878.
12. Habenicht · Kleben · 2009 · 225
13. Enhanced conductivity induced by attractive capillary force in ternary conductive adhesive10.1016/j.compscitech.2016.10.028 ↗
14. In situ generation of photosensitive silver halide for improving the conductivity of electrically conductive adhesives10.1021/acsami.7b07045 ↗
15. Industrialization of ribbon interconnection for silicon heterojunction solar cells with electrically conductive adhesives
16. Reduction of ECA amount for the ribbon interconnection of heterojunction solar cells
17. 2004