‘SolarEYE’ loss analysis of screen-printed, n-type silicon solar cells with ‘monoPoly’ PECVD rear passivated contacts
Source abstract
Abstract
Abstract We present cell results and loss analysis summaries for screen printed, five-busbar (5BB), M2-size, n-type silicon solar cells made with rear-passivated contacts deposited with PECVD (referred to as ‘n-monoPoly’ cells). The PECVD process avoids the need to mask the front during the formation of the rear passivated contact. A median open circuit voltage (VOC) of 702 mV and a peak cell VOC of 705 mV was demonstrated. Improvements to the passivated contact stack led to a passivated rear surface recombination current density (J0-poly) of 5 fA/cm2 and an area-normalised rear metal recombination current density (J0-met) of 3 fA/cm2 for fire-through contacts. The cell models extracted from SolarEYE loss analysis were used to identify the largest VOC and FF losses. The best-fit cell model for 5BB n-monoPoly cells was used to: (i) project realistic 12 busbar (12BB) cell efficiencies; and (ii) simulate the output of the devices under bifacial operation. This 12BB n-monoPoly cell structure with a uniformly-doped p+ emitter has a median efficiency potential of 23.6%, and a potential bifacial output of 7 W with a rear irradiance factor of 0.3 – this would translate to an output of 12.5 W for M12-size wafers with the same rear irradiance. If a selectively-deposited passivated contact is added on the front, the median batch efficiency and VOC of screen-printed n-monoPoly cells can reach 24.7% and 720 mV for these 12BB devices.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Photovoltaic System Optimization Techniques · solar cell performance optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Towards 22% efficient screen-printed bifacial n-type silicon solar cells10.1016/j.solmat.2018.07.020 ↗
2. Passivated rear contacts for high-efficiency n-type Si solar cells providing high interface passivation quality and excellent transport characteristics10.1016/j.solmat.2013.09.017 ↗
3. n-Type polysilicon passivating contact for industrial bifacial n-type solar cells10.1016/j.solmat.2016.06.034 ↗
4. monoPoly™ cells: large-area crystalline silicon solar cells with fire-through screen printed contact to doped polysilicon surfaces10.1016/j.solmat.2018.05.059 ↗
5. Approaching 23% with large-area monoPoly cells using screen-printed and fired rear passivating contacts fabricated by inline PECVD10.1002/pip.3097 ↗
6. Investigation of 23% monoPoly screen-printed silicon solar cells with an industrial rear passivated contact
7. 24.58% total area efficiency of screen-printed, large area industrial silicon solar cells with the tunnel oxide passivated contacts (i-TOPCon) design10.1016/j.solmat.2019.110258 ↗
8. Crystalline silicon solar cell breakthrough and potential advanced material applications
9. A roadmap toward 24% efficient PERC solar cells in industrial mass production10.1109/JPHOTOV.2017.2749007 ↗
10. Evolutionary PERC+ solar cell efficiency projection towards 24% evaluating shadow-mask-deposited poly-Si fingers below the Ag front contact as next improvement step10.1016/j.solmat.2020.110586 ↗
11. n-Type Si solar cells with passivating electron contact: identifying sources for efficiency limitations by wafer thickness and resistivity variation10.1016/j.solmat.2017.05.042 ↗
12. Semi-insulating polycrystalline-silicon (SIPOS) films applied to MOS integrated circuits10.7567/JJAPS.15S1.41 ↗
13. Semi-insulating polycrystalline-silicon (SIPOS) passivation technology10.7567/JJAPS.15S1.35 ↗
14. A silicon heterojunction transistor10.1063/1.91174 ↗
15. Interdigitated back contact solar cells with polycrystalline silicon on oxide passivating contacts for both polarities10.7567/JJAP.56.08MB15 ↗
16. Material properties of LPCVD processed n-type polysilicon passivating contacts and its application in PERPoly industrial bifacial solar cells10.1016/j.egypro.2017.09.250 ↗
17. Study of screen printed metallization for polysilicon based passivating contacts10.1016/j.egypro.2017.09.242 ↗
18. A systematic loss analysis method for rear-passivated silicon solar cells10.1109/JPHOTOV.2014.2388071 ↗
19. Voltage loss analysis for bifacial silicon solar cells: case for two-dimensional large-area modeling10.1109/JPHOTOV.2016.2598261 ↗
20. J. Wong, Griddler, in, griddlersolar.com.
21. Determination of recombination parameters in semiconductors from photoconductance measurements
22. Accurate determination of the emitter saturation current density for industrial p-diffused emitters
23. Contact resistance and contact resistivity10.1149/1.2404240 ↗
24. Solar cell contact resistance - a review10.1109/T-ED.1984.21583 ↗
25. A freeware 1D emitter model for silicon solar cells
26. An examination of three common assumptions used to simulate recombination in heavily doped silicon
27. Toward 30 μm printed ag finger width by ultra fine line double printing
28. Chunduri · 2020
29. 2020
30. Screen printed metallization below 20μm – a generalized design approach for screen technology
31. A new method to characterize bifacial solar cells10.1002/pip.2341 ↗
32. Optimizing plant performance with smart solar trackers & bifacial technology
33. Bifacial tracker and simulations on PV Plants
34. Loo · 2019