journal article·2025-01Open access

In situ high-temperature emissivity measurements of heat-treated, silicon coated stainless steel for solar thermal applications

V. Amrutha, Atasi Dan, Jon Gabirondo-Lopez, Telmo Echaniz, Raquel Fuente, Harish C. Barshilia, Gabriel A. Lopez

Abstract

Understanding thermal emissivity at high temperatures is crucial for developing efficient materials for solar thermal applications. We present a new approach for creating an efficient material for solar absorber by developing a nano structured surface on stainless steel substrate through Si deposition and annealing. We prepare five samples by annealing them at five temperatures between 700 °C and 1100 °C. Afterwards, we perform a systematic study of the spectral emissivity at elevated temperatures, focusing on different parameters: angle dependence, wavelength dependence, and temperature dependence. The spectral directional emissivity experiments performed in the mid-infrared range reveal a dielectric behavior of the samples in the short wavelength region ( λ < 6 μm) and metallic behavior in the long wavelength region ( λ > 12 μm). The results indicate an increase in hemispherical and total normal emissivity with measurement temperature (from 200 °C to 700 °C), influenced by oxide/silicide formation due to interdiffusion, and by surface roughness . Notably, samples annealed at 900 °C and 1000 °C demonstrate enhanced thermal stability at 700 °C, showcasing promising characteristics for high-temperature applications. Consequently, this study presents a viable method for developing cost-effective silicon-based solar absorber coatings on stainless steel with tailored properties for solar thermal applications along with its real time high temperature emissivity details.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Solar Thermal and Photovoltaic Systems · Thermal Radiation and Cooling Technologies · Thermography and Photoacoustic Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (79)

Show source-provided references
1. Annual energy outlook 2022 (AEO2022)
2. 2018
3. Solar selective absorber for emerging sustainable applications10.1002/aesr.202100195 ↗
4. Concentrating solar power10.1021/acs.chemrev.5b00397 ↗
5. Review of physical vapor deposited (PVD) spectrally selective coatings for mid- and high-temperature solar thermal applications10.1016/j.solmat.2011.10.028 ↗
6. Selective absorber coatings and technological advancements in performance enhancement for parabolic trough solar collector10.1007/s11630-022-1634-5 ↗
7. A review of high-temperature selective absorbing coatings for solar thermal applications
8. Review of the spectrally selective (CSP) absorber coatings, suitable for use in SHIP10.1016/j.solmat.2022.111625 ↗
9. High-performance spectrally selective absorber using the ZrB2-based all-ceramic coatings
10. Tungsten-coated silicon nanopillars as ultra-broadband and thermally robust solar harvesting materials10.1021/acsanm.9b02542 ↗
11. Spinel Cu–Mn–Cr oxide nanoparticle-pigmented solar selective coatings maintaining 94% efficiency at 750 °C10.1021/acsami.2c07469 ↗
12. Multiscale plasmonic refractory nanocomposites for high-temperature solar photothermal conversion10.1021/acs.nanolett.2c03003 ↗
13. A new strategy towards spectral selectivity: selective leaching alloy to achieve selective plasmonic solar absorption and infrared suppression10.1016/j.nanoen.2021.106717 ↗
14. Nanostructures for light trapping in thin film solar cells10.3390/mi10090619 ↗
15. Optical nanostructures design, fabrication, and applications for solar/thermal energy conversion10.1016/j.solener.2018.01.010 ↗
16. Photothermal nanomaterials: a powerful light-to-heat converter10.1021/acs.chemrev.3c00159 ↗
17. Optical and infrared properties of glancing angle-deposited nanostructured tungsten films10.1364/OL.40.000506 ↗
18. Thermal treatment of stainless steel substrates along with a thin silicon layer for high temperature solar thermal applications10.1016/j.solener.2023.05.045 ↗
19. Cross-sectional transmission electron microscopy studies of Si coated heat-treated stainless steel with improved optical absorption for solar thermal applications
20. Solar energy absorption mediated by surface plasma polaritons in spectrally selective dielectric-metal-dielectric coatings: a critical review10.1016/j.rser.2017.05.062 ↗
21. Effects of cyclic thermal ageing on coating degradation
22. A review on thermal stability and high temperature induced ageing mechanisms of solar absorber coatings10.1016/j.rser.2016.09.083 ↗
23. Importance of the spectral emissivity measurements at working temperature to determine the efficiency of a solar selective coating10.1016/j.solmat.2015.04.009 ↗
24. Toward high-temperature thermal tolerance in solar selective absorber coatings: choosing high entropy ceramic HfNbTaTiZrN10.1039/D1TA06682J ↗
25. Design of near-ideal and omnidirectional selective solar absorber for high-temperature applications10.1016/j.solmat.2023.112383 ↗
26. Multi-layer solar selective absorber coatings based on W/WSiAlNx/WSiAlOyNx/SiAlOx for high temperature applications10.1016/j.solmat.2018.07.001 ↗
27. Measurement of high temperature emissivity and photothermal conversion efficiency of TiAlC/TiAlCN/TiAlSiCN/TiAlSiCO/TiAlSiO spectrally selective coating10.1016/j.solmat.2017.06.057 ↗
28. Extremely high temperature stable nanometric scale multilayer spectrally selective absorber coating: emissivity measurements at elevated temperatures and a comprehensive study on ageing mechanism10.1016/j.solmat.2020.110905 ↗
29. High-temperature tolerance in WTi-Al2O3 cermet-based solar selective absorbing coatings with low thermal emissivity10.1016/j.nanoen.2017.05.036 ↗
30. Emissivity measurements of W/TiAlN/TiAlSiN/TiAlSiON/TiAlSiO -based multilayer spectrally selective absorbers at high temperature10.1016/j.solener.2023.02.007 ↗
31. A new high-temperature durable absorber material solution through a spinel-type high solar absorptivity coating on Ti2AlC MAX phase material10.1021/acsami.1c10585 ↗
32. Infrared emissivity of copper-alloyed spinel black coatings for concentrated solar power systems10.1016/j.solmat.2019.109961 ↗
33. Investigation of the thermal stability of a solar absorber processed through a hydrothermal technique
34. Spectral selectivity of a thermally oxidized stainless steel10.1016/0165-1633(82)90095-8 ↗
35. Thermal oxidation of stainless steel substrate with tunable spectral selectivity: transition from a reflecting to a highly absorbing Cr–Fe spinel surface10.1016/j.solmat.2021.111381 ↗
36. Characterization of passive films formed on as-received and sensitized AISI 304 stainless steel
37. New insight on early oxidation stages of austenitic stainless steel from in situ XPS analysis on single-crystalline Fe–18Cr–13Ni10.1016/j.corsci.2018.06.001 ↗
38. Corrosion behaviors of heat-resisting alloys in high temperature carbon dioxide
39. Spectral directional and total hemispherical emissivity of virgin and oxidized 316L stainless steel from 1000 to 1650 K10.1016/j.infrared.2022.104156 ↗
40. Efficiency and behavior of textured high emissivity metallic coatings at high temperature10.1016/j.matdes.2015.05.073 ↗
41. Effects of surface roughness, oxidation, and temperature on the emissivity of reactor pressure vessel alloys10.1080/00295450.2017.1353869 ↗
42. Emissivity at high temperature of Ni-based superalloys for the design of solar receivers for future tower power plants10.1016/j.solmat.2021.111066 ↗
43. Tracer diffusion in single crystalline CoCrFeNi and CoCrFeMnNi high-entropy alloys: kinetic hints towards a low-temperature phase instability of the solid-solution?10.1016/j.scriptamat.2020.05.060 ↗
44. Diffusion of chromium, manganese, and nickel in molten iron10.2320/matertrans1960.16.415 ↗
45. Diffusion of silicon in aluminum
46. Self-diffusion in intrinsic and extrinsic silicon10.1063/1.1710079 ↗
47. Updated measurement method and uncertainty budget for direct emissivity measurements at the University of the Basque Country10.1088/1681-7575/ab84ff ↗
48. Siegel · 1971
49. In situ oxidizing commercial alloy to achieve selective solar absorption with high-temperature stability10.1021/acsaem.3c01735 ↗
50. Antireflection effects at nanostructured material interfaces and the suppression of thin-film interference10.1088/0957-4484/24/23/235202 ↗
51. Emissivity measurements and modeling of silicon-related materials: an overview10.1023/A:1012869710173 ↗
52. Transport, optical and thermoelectrical properties of Cr and Fe disilicides and their alloys on Si(1 1 1)10.1016/S0169-4332(01)00062-9 ↗
53. Synthesis and characterization of core–shell structured SiO2@YVO4:Yb3+,Er3+ microspheres10.1016/j.apsusc.2011.12.006 ↗
54. Metal binding to Aβ peptides inhibits interaction with cytochrome c : insights from abiological constructs10.1021/acsomega.8b01736 ↗
55. Spectral selectivity of nickel and chromium rough surfaces10.1007/BF00619084 ↗
56. Enhanced absorptance of surface-textured tungsten thin film for solar absorber10.1080/02670844.2016.1187466 ↗
57. Recent advances in antireflective surfaces based on nanostructure arrays10.1039/C4MH00140K ↗
58. Modeling the angular dependence of emissivity of randomly rough surfaces10.1029/2018JE005840 ↗
59. Behavior of TA6V alloy at high temperature in air plasma conditions: Part 2—thermal diffusivity and emissivity10.1007/s11665-020-04985-6 ↗
60. Spectral emissivity of oxidized and roughened metal surfaces10.1016/j.ijheatmasstransfer.2017.08.103 ↗
61. Spectral-feature-based analysis of reflectance and emission spectral libraries and imaging spectrometer data
62. Microstructural characterization of chromium oxide thin films grown by remote plasma assisted pulsed laser deposition10.1088/1742-6596/59/1/128 ↗
63. Vibrational spectroscopy of bulk and supported manganese oxides10.1039/a807821a ↗
64. A correlation between normal and hemispherical emissivity of low-emissivity coatings on glass10.1016/0735-1933(87)90020-0 ↗
65. Anomalous temperature dependence of the electrical resistivity in binary and pseudobinary alloys based on Fe3Si10.1103/PhysRevB.48.13607 ↗
66. Thermal decomposition behaviour of fine iron ore particles10.2355/isijinternational.54.2196 ↗
67. High-temperature thermal stability of nanocrystalline Cr2O3 films deposited on silicon wafers by arc ion plating10.1016/j.surfcoat.2013.04.020 ↗
68. Transition metal compounds as solar selective material10.1515/revce-2020-0026 ↗
69. Unraveling the optoelectronic properties of CoSbx intrinsic selective solar absorber towards high-temperature surfaces10.1038/s41467-023-42839-6 ↗
70. Solar selective properties and high temperature stability of CVD ZrB210.1016/0165-1633(81)90077-0 ↗
71. Efficient solar energy harvesting enabled by high-entropy ceramic nanofilms through a co-sputtering method10.1016/j.jallcom.2022.167899 ↗
72. Single layer WOx films for efficient solar selective absorber10.1016/j.matdes.2019.108351 ↗
73. Double-layer solar absorber coating based on high entropy ceramic AlCrMoTaTiN: structure, optical properties and failure mechanism
74. A novel multilayer high temperature solar absorber coating based on high-entropy alloy NbMoTaW: optical properties, thermal stability and corrosion properties
75. Selective absorber using glow-discharge amorphous silicon for solar photothermal conversion10.1016/0165-1633(80)90029-5 ↗
76. High temperature efficient, stable Si wafer-based selective solar absorbers10.1063/1.4979510 ↗
77. Control of thermal emittance of stainless steel using sputtered tungsten thin films for solar thermal power applications10.1016/j.solmat.2014.11.002 ↗
78. NiCr–MgF2 spectrally selective solar absorber with ultra-high solar absorptance and low thermal emittance10.1016/j.solmat.2019.110219 ↗
79. Amrutha V, Nair K S, Narayana C and Barshilia H C, Fabrication and performance evaluation of a highly stable micro/nanostructured surface using rapid thermal treatment of Si-coated stainless steel for solar thermal applications, J. Alloys Compd. (submitted).