journal article·2024-08

Upgrade and performance evaluation of G8+ large-size cast mono-Si ingot

Wei Mao, Qi Lei, Liang He, Jianmin Li, Yunfei Xu, Yulong Liu

Publisher page

Abstract

With the rapid growth of CZ mono-Si solar cell technology in the global market, the development of cast mono-Si faces challenges in terms of crystal quality and cost. This study introduces the first preparation of a G8+ large-size casting furnace by upgrading a G7 furnace to enhance casting mono-Si`s performance and economic benefits. The effects of the G8+ casting furnace on the preparation cost of mono-Si ingot, crystal quality and its impact on the performance of solar cells were thoroughly investigated. Modifying the thermal field and optimizing the seed pavement strategy increased the G8+ cast mono-Si ingot weight to 1600 kg, raised the monocrystalline ratio to approximately 98 %, and achieved an effective yield exceeding 50 %. Solar cells made from G8+ cast mono-Si demonstrated electrical performance comparable to CZ mono-Si cells, achieving an average efficiency of 22.64 % with only a 0.3 % efficiency gap. Consequently, the upsizing of cast mono-Si ingots and adopting rigorous defect control strategies could significantly enhance the electrical performance and manufacturing productivity of cast mono-Si.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Integrated Circuits and Semiconductor Failure Analysis · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. The emergence of high-performance multi-crystalline silicon in photovoltaics10.1016/j.jcrysgro.2016.10.072 ↗
2. Fischer · 2020
3. Mass production of p-type Cz silicon solar cells approaching average stable conversion efficiencies of 22%10.1016/j.egypro.2017.09.308 ↗
4. Control of heat transfer in continuous-feeding Czochralski-silicon crystal growth with a water-cooled jacket10.1016/j.jcrysgro.2016.10.041 ↗
5. Contributions to the development of crystal growth technologies
6. Casting single crystal silicon: novel defect profiles from BP Solar's Mono2TM wafers
7. Towards high-efficiency industrial p-type mono-like Si PERC solar cells10.1016/j.solmat.2019.110202 ↗
8. The potential of cast silicon10.1016/j.solmat.2020.110789 ↗
9. Growth of low-cost and high-quality monocrystalline silicon ingots by using split recycled seeds
10. Twenty years crystal growth of solar silicon: my serendipity journey10.1016/j.jcrysgro.2023.127480 ↗
11. Large size multicrystalline silicon ingots10.1016/S0927-0248(01)00152-0 ↗
12. Crystallization of 640kg mc-silicon ingots under traveling magnetic field by using a heater-magnet module10.1016/j.jcrysgro.2012.11.049 ↗
13. Optimization of heat transfer during the directional solidification process of 1600 kg silicon feedstock10.1016/j.jcrysgro.2017.12.042 ↗
14. Higher quality mono-like cast silicon with induced grain boundaries10.1016/j.solmat.2015.03.027 ↗
15. Improving quality of cast monocrystalline Si ingot with seed crystal strips and graphite soft felt10.1016/j.solmat.2023.112416 ↗
16. Experimental study of 3D solid-liquid interfaces and their influence on directional solidification silicon ingot10.1016/j.solmat.2021.110991 ↗
17. Impact of silicon melt infiltration on the quality of cast crystalline silicon10.1016/j.solener.2021.07.062 ↗
18. Seed-assisted growth of cast-mono silicon for photovoltaic application: challenges and strategies10.1002/solr.201900486 ↗