journal article·2024-04Open access

Low-temperature aluminum doped and induced polysilicon and its application as partial rear contacts on p-type silicon solar cells

Zhenyu Sun, Chuqi Yi, Yalun Cai, Anastasia Soeriyadi, Fiacre Rougieux, Stephen Bremner

Abstract

Low-temperature contact techniques offer benefits for various solar cells, including tandem solar cells, which risk degradation from high-temperature contact fabrication for top cell materials, such as in III-V/Si multijunction cells. This paper presents aluminum (Al) doped and induced poly-Si (formed through annealing at 190 °C for 5 min) as localized contacts on p-type silicon absorbers. This approach avoids the high-temperature processes required for poly-Si formation and the toxic gases involved in in-situ doping through chemical vapor deposition. Raman spectroscopy confirms poly-Si formation due to Al-induced recrystallization of a-Si:H(i), with electrochemical capacitance-voltage (ECV) measurements validating Al doping in the newly-formed poly-Si. The contact stack of p-Si/a-Si:H(i)/Al exhibits ohmic behavior after annealing at 190 °C for 5 min, achieving a contact resistivity of ∼13.2 mΩ⋅cm2. Finally, a cell featuring a localized Al-doped poly-Si contact structure is fabricated, realizing a 3% absolute efficiency improvement compared to a full-area Al back contact cell.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and interfaces · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Fischer · 2023
2. 22.8% efficient silicon solar cell10.1063/1.101596 ↗
3. The irresistible charm of a simple current flow pattern – 25% with a solar cell featuring a full-area back contact
4. Twenty-two percent efficiency HIT solar cell10.1016/j.solmat.2008.02.037 ↗
5. Design rules for high-efficiency both-sides-contacted silicon solar cells with balanced charge carrier transport and recombination losses10.1038/s41560-021-00805-w ↗
6. TOPCon – technology options for cost efficient industrial manufacturing10.1016/j.solmat.2021.111100 ↗
7. Effects of LPCVD-deposited thin intrinsic silicon films on the performance of boron-doped polycrystalline silicon passivating contacts10.1016/j.solener.2023.112078 ↗
8. Chan · 1970 · 588
9. Co-diffusion from APCVD BSG and POCl3 for industrial n-type solar cells10.1016/j.egypro.2013.07.282 ↗
10. Studying dopant diffusion from Poly-Si passivating contacts10.1016/j.solmat.2019.109978 ↗
11. Pre-annealing for improved LPCVD deposited boron-doped poly-Si hole-selective contacts10.1016/j.solmat.2022.112123 ↗
12. Bias temperature instability in scaled p+ polysilicon gate p-MOSFET’s10.1109/16.760398 ↗
13. Future challenges for photovoltaic manufacturing at the terawatt level10.1063/5.0020380 ↗
14. Design considerations for multi-terawatt scale manufacturing of existing and future photovoltaic technologies: challenges and opportunities related to silver, indium and bismuth consumption10.1039/D1EE01814K ↗
15. Aluminum-induced crystallization and counter-doping of phosphorous-doped hydrogenated amorphous silicon at low temperatures10.1063/1.362425 ↗
16. 20.1%-efficient crystalline silicon solar cell with amorphous silicon rear-surface passivation10.1002/pip.641 ↗
17. Amorphous silicon enhanced metal-insulator-semiconductor contacts for silicon solar cells10.1063/1.4900539 ↗
18. Simple silicon solar cells featuring an a-Si:H enhanced rear MIS contact10.1016/j.solmat.2015.02.030 ↗
19. Cleaning solution based on hydrogen peroxide for use in silicon semiconductor technology
20. Nickel induced crystallization of amorphous silicon thin films10.1063/1.368016 ↗
21. Al induced crystallization of a‐Si10.1063/1.348842 ↗
22. Gold-induced germanium crystallization10.1103/PhysRevB.46.9505 ↗
23. Effect of incomplete ionization for the description of highly aluminum-doped silicon
24. Recombination activity of interstitial iron and other transition metal point defects in p- and n-type crystalline silicon10.1063/1.1812833 ↗
25. Spatially resolved electrical parameters of silicon wafers and solar cells by contactless photoluminescence imaging10.1063/1.4792348 ↗
26. A new method for experimental determination of the series tesistance of a solar cell10.1109/T-ED.1982.20906 ↗
27. Aluminum-silicon Schottky barriers and ohmic contacts in integrated circuits10.1109/T-ED.1976.18449 ↗
28. Silicon heterojunction solar cell with interdigitated back contacts for a photoconversion efficiency over 2610.1038/nenergy.2017.32 ↗
29. Development of advanced hydrogenation processes for silicon solar cells via an improved understanding of the behaviour of hydrogen in silicon10.1002/pip.3240 ↗
30. 24% efficient silicon solar cells10.1063/1.103610 ↗