journal article·2022-12

Assessing current-voltage measurements of busbarless solar cells

Michael Rauer, Alexander Krieg, Andreas Fell, Sebastian Pingel, Nico Wöhrle, Johannes M. Greulich, Stefan Rein, Martin C. Schubert, Jochen Hohl-Ebinger

Publisher page

Abstract

For measuring the current-voltage ( I–V ) characteristics of busbarless solar cells, there is a certain degree of freedom in the choice of the contacting configuration as none has been defined as standard yet. This leads to the question of how the energy conversion efficiency of a busbarless solar cell should be specified when there are different measured values for it and poses the risk of misinterpreting cell measurements: Designing the measurement system for highest cell efficiencies for example may be tempting but can lead to cell results disassociated from later module performance and reduced cell-to-module power factors. The loss in module efficiency can thereby significantly exceed 5 % rel . It is therefore recommended to always adapt the contacting system to the module interconnection to yield meaningful I–V results in cell measurements. As a remedy for non-adapted measurement conditions, it is shown that I–V results can be converted from various cell measurement configurations to the module configuration. An analytical approach for the conversion of I–V results between measurement systems with different numbers of current contact bars as well as different shading properties is proposed. The approach is validated experimentally on busbarless cells over a large grid resistivity range. For three measurement systems with very different contacting schemes, the differences in fill factor and efficiency between the systems before correction clearly exceeded 10 % rel for high grid resistivities. After correction, good agreement in I–V characteristics within typical measurement uncertainties were shown. Limitations to the analytical approach associated with finger interruptions are identified and discussed.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: solar cell performance optimization · Silicon and Solar Cell Technologies · Photovoltaic System Optimization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. VDMA 2021, “International Technology Roadmap for Photovoltaic (ITRPV): Results 2020”, twelfth ed.
2. Challenges of SHJ technlogy on its way into GW scale mass production – sustainability and yield optimization
3. Future challenges for photovoltaic manufacturing at the terawatt level10.1063/5.0020380 ↗
4. Future industrial solar PV technologies: record cell efficiency announcements versus industrial reality
5. Magazine
6. Photovoltaic devices – Part 1: measurement of photovoltaic current-voltage characteristics
7. The challenge of measuring busbarless solar cells and the impact on cell-to-module losses
8. Solar cell efficiency tables (version 60)10.1002/pip.3595 ↗
9. Bassi · 2014 · 1180
10. Rauer · 2019
11. Bothe · 2020 · 277
12. Raj · 2018 · 3294
13. Ramspeck · 2019 · 443
14. Kamatani · 2019 · 384
15. Test bus for solar cells” (WO21198259A1)
16. The concept of skins for silicon solar cell modeling10.1016/j.solmat.2017.05.012 ↗
17. Systematic PV module optimization with the cell-to-module (CTM) analysis software
18. The link between Ag-paste rheology and screen-printed solar cell metallization10.1002/admt.202000654 ↗
19. Goetzberger · 1998 · vol. 1
20. Impact of contacting geometries when measuring fill factors of solar cell current–voltage characteristics10.1109/JPHOTOV.2017.2677084 ↗
21. A review and comparison of different methods to determine the series resistance of solar cells10.1016/j.solmat.2007.05.026 ↗
22. Papet · 2017
23. Lossen · 2019
24. Fill factor analysis of solar cells' current–voltage curves10.1002/pip.979 ↗