journal article·2019-04

Controllable phase transformation of titanium dioxide for the high performance polymer solar cells

Peiwen Lv, Shan-Ci Chen, Feng Huang

Publisher page

Abstract

Abstract As an important electron transport layer, titanium dioxide is intensively studied in the polymer solar cells. Titanium dioxide exists as two main polymorphs which are anatase and rutile. However, the impacts of the presence of either or both of these phases on the performance of polymer solar cells remain unclear. In this work, high quality TiO2 films with controllable polymorphs are deposited via sputtering under room temperature. Pure phase of anatase and rutile are obtained. The distinguishing characteristics of the films were analyzed and PSCs with the structure of ITO/TiO2/PTB7-Th:PC71BM/MoOx/Ag were made. We found a better electron extraction efficiency of anatase which may originated from the band alignment of TiO2 in between ITO and active layer and smaller electron effective mass of anatase. Moreover, the anatase possesses a closer refractive index with ITO and high transparency in the short wavelength range which make it efficiently utilize the induced light. The efficiency of the PSCs has achieved 4.01% for rutile device and 8.26% for anatase device.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. New processes for the production of solar-grade polycrystalline silicon: a review10.1016/j.solmat.2007.10.003 ↗
2. Progress in emerging solution-processed thin film solar cells - Part II: perovskite solar cells10.1016/j.rser.2016.05.042 ↗
3. Progress in emerging solution-processed thin film solar cells - Part I: polymer solar cells10.1016/j.rser.2015.11.063 ↗
4. Polymer solar cells: recent development and possible routes for improvement in the performance10.1016/j.solmat.2009.10.005 ↗
5. Fullerene-free polymer solar cells with over 11% efficiency and excellent thermal stability10.1002/adma.201600281 ↗
6. Efficient organic solar cells processed from hydrocarbon solvents10.1038/nenergy.2015.27 ↗
7. A high efficiency solution processed polymer inverted triple-junction solar cell exhibiting a power conversion efficiency of 11.83%10.1039/C4EE03048F ↗
8. Polymer: fullerene bulk heterojunction solar cells10.1016/S1369-7021(11)70210-3 ↗
9. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
10. Engineering TiO2 nanomaterials for CO2 conversion/solar fuels10.1016/j.solmat.2012.05.037 ↗
11. Review of functional titanium oxides. I: TiO2 and its modifications10.1016/j.progsolidstchem.2016.07.002 ↗
12. Metal oxides for optoelectronic applications10.1038/nmat4599 ↗
13. All-solid-state dye-sensitized solar cells with high efficiency10.1038/nature11067 ↗
14. Planar CH3NH3PbI3 perovskite solar cells with constant 17.2% average power conversion efficiency irrespective of the scan rate10.1002/adma.201500048 ↗
15. Zinc oxide based photocatalysis: tailoring surface-bulk structure and related interfacial charge carrier dynamics for better environmental applications10.1039/C4RA13299H ↗
16. Photocatalytic activity of ZnO-TiO2 hierarchical nanostructure prepared by combined electrospinning and hydrothermal techniques10.1007/s13233-010-0303-9 ↗
17. Review on dye-sensitized solar cells (DSSCs): advanced techniques and research trends10.1016/j.rser.2016.09.097 ↗
18. Highly efficient perovskite solar cells with a compositionally engineered perovskite/hole transporting material interface10.1039/C6EE03182J ↗
19. On crystallite size dependence of phase stability of nanocrystalline TiO210.1063/1.1604966 ↗
20. Photoactivity and phase stability of ZrO2-doped anatase-type TiO2 directly formed as nanometer-sized particles by hydrothermal conditions10.1016/S0022-4596(02)00013-0 ↗
21. Thermodynamic analysis of phase stability of nanocrystalline titania10.1039/a802619j ↗
22. Review of the anatase to rutile phase transformation10.1007/s10853-010-5113-0 ↗
23. TiO2-based photocatalysis: surface defects, oxygen and charge transfer10.1007/s11244-005-3825-1 ↗
24. Thermally stable TiO2 quantum dots embedded in SiO2 foams: characterization and photocatalytic H-2 evolution activity10.1016/j.apcatb.2018.02.022 ↗
25. Revealing the origin of fast electron transfer in TiO2-based dye sensitized solar cells10.1021/jacs.6b03524 ↗
26. Electrical and optical-properties of Tio2 anatase thin-films10.1063/1.356306 ↗
27. New understanding of the difference of photocatalytic activity among anatase, rutile and brookite TiO210.1039/C4CP02201G ↗
28. Fast electron transport and high surface area: potential application of porous anatase single crystals in solar cells10.1002/anie.201303849 ↗
29. Electronic band structure of transparent conductor: Nb-doped anatase TiO2
30. High electron mobility ZnO film for high-performance inverted polymer solar cells
31. Epitaxial rutile TiO2 film based on MgF2 substrate for ultraviolet detector10.1016/j.jallcom.2016.05.126 ↗
32. Photoluminescence study on defects in pristine anatase and anatase-based composites10.1016/j.physb.2003.09.172 ↗
33. Microscopic origin of lattice contraction and expansion in undoped rutile TiO2 nanostructures10.1088/0022-3727/47/21/215302 ↗
34. Tailoring the structural, optical, and photoluminescence properties of porous silicon/TiO2 nanostructures10.1021/acs.jpcc.5b01670 ↗
35. Electric-dipole effect of defects on the energy band alignment of rutile and anatase TiO210.1039/C5CP04495B ↗
36. Bandgap tunable Zn1-xMgxO thin films as highly transparent cathode buffer layers for high-performance inverted polymer solar cells10.1002/aenm.201301404 ↗
37. Fullerene derivative-doped zinc oxide nanofilm as the cathode of inverted polymer solar cells with low-bandgap polymer (PTB7-Th) for high performance10.1002/adma.201301476 ↗
38. The study of solvent additive effects in efficient polymer photovoltaics via impedance spectroscopy10.1016/j.solmat.2014.05.049 ↗
39. Energy-effectively printed all-polymer solar cells exceeding 8.61% efficiency10.1016/j.nanoen.2018.02.035 ↗