Influence of an interfacial cesium oxide thin layer in the performance and internal dynamic processes of GaSe9 solar cells
Source abstract
Abstract
Abstract Solar cells based on evaporated Cs 2 O/GaSe 9 and Cs 2 O/Se (as comparison) active layers have been investigated. We correlate their performance with devices previously reported without Cs 2 O. GaSe 9 appears as a very promising solar absorber because of its attractive optical and electrical properties. We improved device performance by around 30% by inserting a Cs 2 O thin interlayer. Current density-voltage, capacitance-voltage and impedance spectroscopy measurements were used to characterize the effect of Cs 2 O layer on device performance. The charge carrier concentration and the built-in potential were derived using Schottky-Mott relation. The enhancement promoted by Cs 2 O is attributed to an improvement in electron extraction efficiency by FTO, and the avoidance of Se sublimation during the annealing process. The insertion of the metallic oxide also increases the built-in potential at FTO/GaSe 9 interface. Dynamic processes were clearly identified by impedance spectroscopy under complex modulus analysis, confirming better capabilities of charge collection by the Cs 2 O containing electrodes.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Phase-change materials and chalcogenides · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Research opportunities to advance solar energy utilization10.1126/science.aad1920 ↗
2. Optical absorption and photoconductivity of amorphous and hexagonal selenium10.1063/1.1748016 ↗
3. Selenium as a photoabsorber for inorganic-organic hybrid solar cells10.1039/C4CP02821J ↗
4. Efficient ITO/Se heterojunction solar cells10.1143/JJAP.23.L587 ↗
5. Polycrystalline thin-film TiO2/Se solar cells10.1143/JJAP.24.L536 ↗
6. Nanoporous n-TiO2/selenium/p-CuCNS photovoltaic cell10.1088/0022-3727/31/18/019 ↗
7. 3-D solar cells by electrochemical-deposited Se layer as extremely-thin absorber and hole conducting layer on nanocrystalline TiO2 electrode10.1186/1556-276X-8-8 ↗
8. Solution-processed air-stable mesoscopic selenium solar cells10.1021/acsenergylett.6b00249 ↗
9. Perspectives on SnSe-based thin film solar cells: a comprehensive review10.1007/s10854-016-4563-9 ↗
10. Antimony selenide thin-film solar cells10.1088/0268-1242/31/6/063001 ↗
11. Photovoltaic performance of TCVA-InSe hybrid solar cells based on nanostructure films10.1016/j.solmat.2016.10.051 ↗
12. Morphological, optical and electrical properties of GaSe9 films and its application in photovoltaic devices10.1007/s10854-016-5794-5 ↗
13. 2013
14. The roles of thermally evaporated cesium carbonate to enhance the electron injection in organic light emitting devices10.1063/1.3033501 ↗
15. Efficient inverted polymer solar cells10.1063/1.2212270 ↗
16. High efficiency hybrid PEDOT:PSS/nanostructured silicon Schottky junction solar cells by doping-free rear contact10.1039/C4EE02282C ↗
17. Low-work-function surface formed by solution-processed and thermally deposited nanoscale layers of cesium carbonate10.1002/adfm.200700051 ↗
18. Use of tin oxide thin films as a transparent electrode in PPV based light-emitting diodes10.1016/S0040-6090(00)00967-6 ↗
19. Barsoukov · 2005
20. Electrical conduction in (Na0.5Bi0.5)1-xBaTiO3(0<x<1) ceramic by complex impedance/modulus spectroscopy10.1155/2013/369670 ↗
21. Charge carrier hopping in poly(arylenevinylenes)10.1016/0014-3057(77)90025-8 ↗
22. Modulus spectroscopy study of a double perovskite oxide Sr 2 CeNbO 6: frequency and time domain analyses10.1016/j.solidstatesciences.2012.04.025 ↗
23. Etching methods for indium oxide/tin oxide films10.1016/0040-6090(76)90087-0 ↗
24. All-organic vertical transistor in an analogous n-semiconductor/metal/p- semiconductor trilayer structure10.1016/j.orgel.2014.01.004 ↗
25. Electronic and optical properties of amorphous GaSe thin films10.1007/s10854-016-4711-2 ↗
26. Considerations about the electrochemical estimation of the ionization potential of conducting polymers
27. Solution-processed antimony selenide heterojunction solar cells10.1002/aenm.201301846 ↗
28. Organometallic halide perovskites: sharp optical absorption edge and its relation to photovoltaic performance
29. Tauc · 1974
30. Fill factor in organic solar cells10.1016/j.solmat.2008.06.001 ↗
31. Effect of cathode buffer layer on the stability of polymer bulk heterojunction solar cells10.1016/j.solmat.2010.05.043 ↗
32. Electrical characterization of TiO2/CH3NH3PbI3 heterojunction solar cells10.1039/C4TA01219D ↗
33. Efficiency limiting factors of organic bulk heterojunction solar cells identified by electrical impedance spectroscopy10.1016/j.solmat.2006.10.020 ↗
34. Characterization of planar lead halide perovskite solar cells by impedance spectroscopy, open-circuit photovoltage decay, and intensity-modulated photovoltage/photocurrent spectroscopy10.1021/jp510837q ↗
35. Dissociation processes of singlet and triplet excitons in organic photovoltaic cells10.1063/1.2357584 ↗
36. Sze · 2007
37. Compilation of the static dielectric constant of inorganic solids10.1063/1.3253121 ↗
38. Classification of solar cells according to mechanisms of charge separation and charge collection10.1039/C4CP05174B ↗
39. Carrier dynamics of p-n heterojunction organic photovoltaic cells analyzed by a novel graphic representation of impedance spectroscopy10.4236/ampc.2015.51001 ↗
40. Impedance spectroscopy on organic bulk-heterojunction solar cells10.1002/pssa.200521149 ↗