journal article·2014-06

Comprehensive study of light induced plating of nickel and its effect on large area laser doped crystalline solar cells

Su Zhou, Chunlan Zhou, Wenjing Wang, Junjie Zhu, Yehua Tang, Jingwei Chen, Yan Zhao

Publisher page

Abstract

Abstract Light-induced plating (LIP) as one of alternative metallization technologies has been widely investigated for solar cell metallization, especially for laser-doped selective emitter (LDSE) silicon solar cells. Plating of nickel layer is very crucial in the whole metallization process because nickel is the initial layer on the laser doped area, acting as both contact and barrier layer. The negative effect of poor nickel layer on performance degradation was initially evaluated on LDSE solar cells. Several parameters of light induced nickel plating were then investigated via a laboratory scale plating bath to understand the mechanism of light induced nickel plating directly on the laser doped silicon. Finally, the effect of nickel plating improvement on the performance of large area laser-doped multi-crystalline solar cells was studied via an industrial plating system. By optimization of the applied voltage in the plating nickel, the operation window of laser power was enlarged. At last, an independent confirmed cell efficiency of 17.8% was achieved on large area (243.4 cm2) LDSE multi-crystalline silicon.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Screen printed metallization of silicon solar-cells10.1155/APEC.7.107 ↗
2. Thick-film metallization for solar-cell applications10.1109/T-ED.1984.21575 ↗
3. A. Nguyen, A. Fioramonti, D. Morrissey, H. Efstathiadis, Z.Y. Zhao, P. Haldar, IEEE feasibility of improving front metallization lines for photovoltaic devices, in: Proceedings of the 34th IEEE Photovoltaic Specialists Conference 2009, Vol 1–3, IEEE, New York, 2009, pp. 1481–1484.10.1109/PVSC.2009.5411673 ↗
4. A. Lennon, Y. Yao, S. Wenham, Evolution of metal plating for silicon solar cell metallisation, Progress in Photovoltaics: Research and Applications, 2012.10.1002/pip.2221 ↗
5. Ni/Cu metallization for low-cost high-efficiency PERC cells10.1016/S0927-0248(02)00049-1 ↗
6. A novel two step metallization of Ni/Cu for low concentrator c-Si solar cells10.1016/j.solmat.2010.06.032 ↗
7. Improved LDSE processing for the avoidance of overplating yielding 19.2% efficiency on commercial grade crystalline Si solar cell10.1016/j.solmat.2011.07.030 ↗
8. Overcoming over-plating problems for PECVD SiNx passivated laser doped p-type multi-crystalline silicon solar cells10.1016/j.solmat.2011.12.003 ↗
9. Experimental study on the elimination of over-plating problems in industrial manufacturing of large-area acidic-textured laser-doped multi-crystalline solar cells10.1016/j.solmat.2012.08.019 ↗
10. Record large-area p-Type CZ production cell efficiency of 19.3% based on LDSE technology10.1109/JPHOTOV.2011.2164392 ↗
11. SiOx(C)/SiNx dual-layer anti-reflectance film coating for improved cell efficiency10.1016/j.solener.2011.09.007 ↗
12. V. Radtke, J. Bartsch, S. Greil, C. Schetter, R. Bergander, S.W. Glunz, Understanding the electrochemical mechanisms of light-induced plating by means of voltammetric techniques, in: Proceedings of the 23rd European Photovoltaic Solar Energy Conference and Exhibition, Valencia, Spain, 2008, pp. 1785–1788.
13. Electrical properties of fine line printed and light-induced plated contacts on silicon solar cells10.1002/pip.938 ↗
14. Electrochemical methods to analyse the light-induced plating process10.1007/s10800-009-0054-5 ↗
15. J. Bartsch, V. Radtke, C. Savio, S.W. Glunz, Progress in understanding the current paths and depositon mechanisms of light induced plating and implications for the process, in: Proceedings of the 24th European PV Solar Energy Conference and Exhibition, Hamburg Germany, 2009, pp. 1469–1474.
16. Effects of seed layer and substrate morphology on solar cell contacts deposited by light-induced plating10.1149/1.3571266 ↗
17. J. Bartsch, A. Mondon, B.-J. Godejohann, M. Hörteis, S.W. Glunz, Advanced front side metallization for crystalline silicon solar cells based on a fully plated contact, in: Proceedings of the 25th European Photovoltaic Solar Energy Conference, Valencia, Spain, 2010, pp. 1978–1983.
18. J. Bartsch, A. Mondon, C. Schetter, M. Hoerteis, S.W. Glunz, IEEE, copper as conducting layer in advanced front side metallization processes for crystalline silicon solar cells, exceeding 20% on printed seed layers, in: Proceedings of the 35th IEEE Photovoltaic Specialists Conference, 2010.10.1109/PVSC.2010.5614244 ↗
19. Investigation of unusual shunting behavior due to phototransistor effect in n-type aluminum-alloyed rear junction solar cells10.1016/j.solmat.2009.07.018 ↗
20. Effect of edge junction isolation on the performance of laser doped selective emitter solar cells10.1016/j.solmat.2011.09.001 ↗
21. SiliconPV 2012 generation of defect-related acceptor states by laser doping10.1016/j.solmat.2012.06.045 ↗