journal article·2023-08

Cr–Mn-diffusion coatings on VM12: In situ spinel formation with high solar absorptance for concentrated solar plants

Anke Silvia Ulrich, Clara Schlereth, Benjamin Grégoire, Florian Sutter, Ceyhun Oskay, Christina Hildebrandt, Mathias Christian Galetz

Publisher page

Abstract

Receiver systems in concentrated solar power plants have to withstand harsh desert conditions and high temperatures, while maintaining high efficiencies converting solar radiation to thermal energy within a heat transfer fluid. The need to improve high absorbing receiver coatings with respect to their lifetime is essential to enhance the economic efficiency of such plants. Diffusion coatings based on Cr and Mn are shown to provide intrinsic self-healing properties forming black Cr–Mn-oxides in situ. Oxidation tests in air are conducted at temperatures between 527 and 710 °C up to 100 h. Thereby, solar absorptances up to 93% and optical coatings efficiencies up to 80% are obtained on coated VM12 steel with the best coating performance shown at around 650 °C. Thermocyclic oxidation for up to 640 h at a maximum temperature of 650 °C proves that there is a slight drop in solar absorptance after around 50 h of exposure, but afterwards it remains stable. Additionally, it is found that coated VM12 performs better in comparison to P91 steel. A mechanism of oxide formation and coating consumption is proposed showing the importance of Mn diffusion on oxide formation. In the beginning of the exposure, Mn2O3 and cubic MnxCr3-xO4 (β-spinel) form, which transform to tetragonal MnxCr3-xO4 (α-spinel) and with continuing exposure also to Cr2O3. For analysis, metallographic investigations are combined with methods such as Raman-spectroscopy, XRD, spectrophotometry, qualitative and quantitative EPMA measurements.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solar Thermal and Photovoltaic Systems · Silicon and Solar Cell Technologies · Solar-Powered Water Purification Methods

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (69)

Show source-provided references
1. Recent advances in eco-friendly and cost-effective materials towards sustainable dye-sensitized solar cells10.1039/D0GC01148G ↗
2. Integrated energy conversion and storage devices: interfacing solar cells, batteries and supercapacitors10.1016/j.ensm.2022.06.051 ↗
3. Srinivasan · 2023
4. A comprehensive review of stationary energy storage devices for large scale renewable energy sources grid integration10.1016/j.rser.2022.112213 ↗
5. Chapter 5 - socio-economic and environmental assessment of concentrating solar power systems
6. A comprehensive review of advanced hybrid technologies that improvement the performance of solar dryers: photovoltaic/thermal panels, solar collectors, energy storage materials, biomass, and desalination units10.1016/j.solener.2023.02.032 ↗
7. Materials corrosion for thermal energy storage systems in concentrated solar power plants10.1016/j.rser.2018.01.010 ↗
8. Past research and future strategies for molten chlorides application in concentrated solar power technology10.1016/j.solmat.2021.111557 ↗
9. Accelerated ageing of solar receiver coatings: experimental results for T91 and VM12 steel substrates10.1063/1.5067230 ↗
10. Solar selective coatings for concentrating solar power central receivers
11. Durability of solar absorber coatings and their cost-effectiveness10.1016/j.solmat.2017.03.010 ↗
12. Accelerated aging of absorber coatings for CSP receivers under real high solar flux–Evolution of their optical properties10.1016/j.solmat.2018.12.030 ↗
13. Coatings for concentrating solar systems – a review10.1016/j.rser.2015.01.015 ↗
14. Radosevich · 1988
15. Degradation mechanisms and non-linear thermal cycling effects in a high-temperature light-absorber coating10.1016/j.solmat.2020.110719 ↗
16. Forty shades of black: a benchmark of high temperature sprayable black coatings applied on Haynes 23010.1063/5.0028773 ↗
17. Review of high-temperature central receiver designs for concentrating solar power10.1016/j.rser.2013.08.099 ↗
18. Kennedy · 2002
19. Slurry aluminizing: a solution for molten nitrate salt corrosion in concentrated solar power plants10.1016/j.solmat.2015.11.024 ↗
20. Li · 2003
21. Improved oxidation resistance of ferritic–martensitic steels in water vapour containing environments via diffusion coatings10.3184/096034012X13315446390033 ↗
22. Ferritic–martensitic steels: improvement of the oxidation behavior in steam environments via diffusion coatings10.1016/j.surfcoat.2013.09.018 ↗
23. Abang · 2016
24. Chromium vaporisation from Fe,Cr base alloys used as interconnect in fuel cells10.1002/srin.200100163 ↗
25. Chromium vaporization from high-temperature alloys: I. Chromia-forming steels and the influence of outer oxide layers10.1149/1.2434690 ↗
26. Reduction of chromium evaporation with manganese-based coatings10.1149/1.3205673 ↗
27. Fähsing · 2016
28. Effects of metal dopings on CuCr2O4 pigment for use in concentrated solar power solar selective coatings10.1021/acsaem.8b01976 ↗
29. Improving optical properties of diffusion-based absorber coatings for CSP tower systems10.1063/1.5117511 ↗
30. Thermodynamic assessment of the Cr–Mn–O system10.1016/j.jallcom.2010.04.252 ↗
31. Critical evaluation and thermodynamic modeling of the Mn–Cr–O system for the oxidation of SOFC interconnect10.1016/j.ssi.2006.01.012 ↗
32. Corrosion performance of slurry aluminide coatings in molten NaCl–KCl10.1016/j.solmat.2021.110974 ↗
33. New 12% Cr-steel for tubes and pipes in power plants with steam temperatures up to 650°C
34. Constitution diagram for stainless steel weld metal
35. Use of Raman microscopy and band-target entropy minimization technique to differentiate physical mixture from chemical mixture in mixed metal oxides10.1016/j.cattod.2007.10.079 ↗
36. A study of the interatomic interaction in oxide spinel MnCr2O410.1016/0921-4526(93)90008-T ↗
37. Selective oxidation synthesis of MnCr2O4 spinel nanowires from commercial stainless steel foil10.1021/cg070514a ↗
38. High-pressure study of Cr2O3 obtained by high-temperature oxidation by X-ray diffraction and Raman spectroscopy10.1016/S0022-3697(00)00215-8 ↗
39. Corrosion mechanisms of ferritic-martensitic P91 steel and Inconel 600 nickel-based alloy in molten chlorides. Part I: NaCl–KCl binary system10.1016/j.solmat.2020.110659 ↗
40. Raman microspectroscopy of some iron oxides and oxyhydroxides10.1002/(SICI)1097-4555(199711)28:11<873::AID-JRS177>3.0.CO;2-B ↗
41. Vibrational spectroscopic characterization of hematite, maghemite, and magnetite thin films produced by vapor deposition10.1021/am1004943 ↗
42. Structural, optical, magnetic and electrical properties of hematite (α-Fe2O3) nanoparticles synthesized by two methods: polyol and precipitation10.1007/s00339-017-1408-1 ↗
43. Raman fingerprint of chromate, aluminate and ferrite spinels10.1002/jrs.4764 ↗
44. Facile solution-phase synthesis of γ-Mn3O4 hierarchical structures10.1186/1752-153X-1-8 ↗
45. Raman and IR spectroscopic investigation of as adsorbed on Mn3O4 magnetic composites10.1016/j.saa.2012.04.061 ↗
46. Magnetic properties of Mn3O4 film with a coexistence of two preferential orientations10.1063/1.4889819 ↗
47. Strong enhancement of deSoot activity of transition metal oxides by alkali doping: additive effects of potassium and nitric oxide10.1007/s11244-016-0727-3 ↗
48. Hosterman · 2011
49. Diffusion of manganese in type 316 austenitic stainless steel10.1179/030634575790444432 ↗
50. The lattice and grain boundary diffusion of manganese in 20/25/Nb stainless steel10.1515/ijmr-1975-661111 ↗
51. Diffusion of chromium in ferritic and austenitic 9–20 wt-% chromium steels10.1179/026708300101507055 ↗
52. Oxidation behavior of an austenitic stainless FeMnSiCrNi shape memory alloy10.1016/j.corsci.2012.09.029 ↗
53. Insights into high-temperature oxidation of Fe-Mn-Si-Cr-Ni shape memory stainless steels and its relationship to alloy chemical composition10.1016/j.corsci.2019.108269 ↗
54. Initial stages of FeMnSiCrNi shape memory stainless steels oxidation mechanism at 800 °C10.1016/j.corsci.2021.109255 ↗
55. Early material damage in equimolar CrMnFeCoNi in mixed oxidizing/sulfiding hot gas atmosphere10.1002/adem.202101573 ↗
56. The effect of Mn on the oxidation behavior and electrical conductivity of Fe–17Cr alloys in solid oxide fuel cell cathode atmosphere10.1016/j.jpowsour.2011.05.007 ↗
57. High temperature cyclic oxidation behavior of ferritic stainless steel with addition of alloying elements Nb and Ti for use in SOFCs interconnect10.1016/j.ijhydene.2016.01.090 ↗
58. Oxidation kinetics and microstructure evolution of high Mn stainless-steel alloy in CO2 at 700 °C10.1016/j.corsci.2021.110013 ↗
59. Meißner · 2021
60. Diffusion of chromium, manganese, and iron in MnCr2O4 spinel10.1007/s11669-005-0051-2 ↗
61. Phase diagram of the Mn2O3- Cr2O3 system in air10.1016/0025-5408(80)90101-4 ↗
62. Initial high-temperature oxidation behavior of Fe–Mn binaries in air: the kinetics and mechanism of oxidation10.1007/s11085-022-10115-5 ↗
63. Volatilization kinetics of chromium oxide, manganese oxide, and manganese chromium spinel at high temperatures in environments containing water vapor10.1002/maco.201810655 ↗
64. Structural and optical characterization of (FexMn1-x)2O3 pigments for solar absorption applications10.24275/uam/izt/dcbi/revmexingquim/2018v17n3/SanchezC ↗
65. High-efficiency, high-temperature, air-stable Cu, Mn and Fe oxides nanoparticles-pigmented silicone solar selective coatings via hot spray-coating method
66. DeWinter · 1990
67. Diamond coating of steel at high temperatures in hot filament chemical vapour deposition (HFCVD) employing chromium interlayers10.1016/j.diamond.2005.10.053 ↗
68. Synthesis of manganese ferrite from manganese ore prepared by mechanical milling and its application as an inorganic heat-resistant pigment10.1016/j.jmrt.2020.05.122 ↗
69. Status of development of the VM12 steel for application at high temperature in advanced power plants