journal article·2022-03

Investigation on the influence of dispersion mass transfer on the thermal characteristics of phase change emulsion

S. Li, L. Jiang, X.J. Zhang

Publisher page

Abstract

This paper aims to investigate the influence of dispersion mass transfer on thermal properties of n-hexadecane phase change emulsion in terms of thermal diffusivity , thermal conductivity and heat storage capacity. The microscopic evidence has been revealed, and a self-designed interface dispersion mass transfer measuring device is established to confirm with micro-formation. It is worth noting that dispersion mass transfer could enhance part of thermal properties and heat storage performance of the emulsion. In a certain range, the larger the intensity of dispersion mass transfer is, the greater the amount of deionized water homogenized by phase change materials will become. Dispersion mass transfer will weaken thermal diffusivity of phase change emulsion, the weakening ratio is about 57.1%–66.5%. In addition, dispersion mass transfer will significantly enhance thermal conductivity and heat storage performance of the emulsion, and enhancement ratio are above 11.52% and 11.56%, respectively. Although difference in the types of emulsifiers will cause small fluctuations in research results, it does not affect the influence trend of dispersion mass transfer on thermo-physical properties. Based on the finding of mass transfer, it may be quite prospective for future phase change emulsion preparation.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Nanocellulose as an inhibitor of water-in-crude oil emulsion formation10.1016/j.fuel.2019.116830 ↗
2. Food-grade Pickering emulsions for encapsulation and delivery of bioactives10.1016/j.tifs.2020.04.020 ↗
3. Interactions between surfactants and the skin–Theory and practice10.1016/j.cis.2018.04.002 ↗
4. Characterisation of electrical energy storage technologies10.1016/j.energy.2013.02.037 ↗
5. An overview of thermal energy storage systems10.1016/j.energy.2017.12.037 ↗
6. Formulation and processing of novel non-aqueous polyethylene glycol-in-silicone oil (o/o) phase change emulsions10.1016/j.solmat.2020.110898 ↗
7. Recent developments in phase change materials for energy storage applications: a review10.1016/j.ijheatmasstransfer.2018.09.126 ↗
8. Flow and heat transfer characteristics of phase change emulsions in a circular tube: Part 1. Laminar flow10.1016/j.ijheatmasstransfer.2017.10.055 ↗
9. Enhancement of oil recovery by emulsion injection: a pore scale analysis from X-ray micro-tomography measurements10.1016/j.petrol.2020.108134 ↗
10. Bioinspired surface with special wettability for liquid transportation and separation
11. A review of technologies for transporting heavy crude oil and bitumen via pipelines10.1007/s13202-013-0086-6 ↗
12. A review of recent progress in drug and protein encapsulation: approaches, applications and challenges10.1016/j.msec.2017.10.003 ↗
13. Eco-friendly O/W emulsions with potential application in skincare products10.1016/j.colsurfa.2020.125969 ↗
14. A comprehensive review on phase change material emulsions: fabrication, characteristics, and heat transfer performance10.1016/j.solmat.2018.11.016 ↗
15. Optimization on the photo-thermal conversion performance of graphite nanoplatelets decorated phase change material emulsions10.1016/j.solmat.2018.07.005 ↗
16. Microencapsulated phase change materials based on graphene Pickering emulsion for light-to-thermal energy conversion and management10.1016/j.solmat.2019.110204 ↗
17. Fabrication and characterization of poly (melamine-formaldehyde)/silicon carbide hybrid microencapsulated phase change materials with enhanced thermal conductivity and light-heat performance10.1016/j.solmat.2018.03.019 ↗
18. High-energy storage graphene oxide modified phase change microcapsules from regenerated chitin Pickering Emulsion for photothermal conversion10.1016/j.solmat.2020.110924 ↗
19. Nanoencapsulation of phase change materials for advanced thermal energy storage systems10.1039/C8CS00099A ↗
20. Preparation and flow resistance characteristics of novel microcapsule slurries for engine cooling system10.1016/j.enconman.2016.12.043 ↗
21. Fabrication of a novel nano phase change material emulsion with low supercooling and enhanced thermal conductivity10.1016/j.renene.2019.11.044 ↗
22. Novel metal coated nanocapsules of ethyl esters fatty acid eutectic mixture as phase change material with enhanced thermal conductivity for energy storage applications10.1016/j.tca.2020.178581 ↗
23. Gradient design of pore parameters on the melting process in a thermal energy storage unit filled with open-cell metal foam10.1016/j.apenergy.2020.115019 ↗
24. J. Guo, Z. Liu, Z. Du, J. Yu, X. Yang, J. Yan. Effect of fin-metal foam structure on thermal energy storage: an experimental study. Renew. Energy. 172(2021), 57-70.10.1016/j.renene.2021.03.018 ↗
25. Influence of aspect ratios for a tilted cavity on the melting heat transfer of phase change materials embedded in metal foam10.1016/j.icheatmasstransfer.2021.105127 ↗
26. Advanced applications of tunable ferrofluids in energy systems and energy harvesters: a critical review10.1016/j.enconman.2017.07.064 ↗
27. Thermal conductivity of emulsion with anisotropic microstructure induced by external field10.1007/s00396-020-04672-x ↗
28. Mass-transfer-controlled dynamic interfacial tension in microfluidic emulsification processes10.1021/acs.langmuir.6b00271 ↗
29. Interfacial viscoelasticity controls buckling, wrinkling and arrest in emulsion drops undergoing mass transfer10.1039/c2sm25438g ↗
30. Spontaneous cyclic dimpling in emulsion films due to surfactant mass transfer between the phases10.1006/jcis.1993.1352 ↗
31. Mass-transfer-induced multistep phase separation in emulsion droplets: toward self-assembly multilayered emulsions and onionlike microspheres10.1021/acs.langmuir.6b01665 ↗
32. Investigation on the dispersion mass transfer in the interface between silicone oil and water10.1016/j.ijheatmasstransfer.2019.06.018 ↗
33. Investigation on the characteristics of dispersion mass transfer associated matter in the silicone oil and water interface10.1016/j.ijheatmasstransfer.2019.119114 ↗
34. Experimental study on swelling rheological characteristics of oil/water interface layer
35. A simple method to assess the hydrophilic lipophilic balance of food and cosmetic surfactants using the phase inversion temperature of C10E4/n-octane/water emulsions10.1016/j.colsurfa.2014.02.058 ↗
36. Use of the normalized hydrophilic-lipophilic-deviation (HLDN) equation for determining the equivalent alkane carbon number (EACN) of oils and the preferred alkane carbon number (PACN) of nonionic surfactants by the fish-tail method (FTM)10.1016/j.cis.2019.102099 ↗
37. Interfaces and the driving force of hydrophobic assembly10.1038/nature04162 ↗
38. Modeling soft interface dominated systems: a comparison of phase field and Gibbs dividing surface models10.1016/j.physrep.2017.01.002 ↗
39. Probing the interaction mechanism between oil droplets with asphaltenes and solid surfaces using AFM10.1016/j.jcis.2019.09.092 ↗
40. A DSC study of water behavior in water-in-oil microemulsions stabilized by sucrose esters and butanol10.1016/S0927-7757(00)00486-6 ↗
41. Zhang · 2006
42. Experimental study on effective thermal conductivity of microcapsules based phase change composites10.1016/j.ijheatmasstransfer.2017.02.068 ↗
43. Preparation and characterization of nano-sized phase change emulsions as thermal energy storage and transport media10.1016/j.apenergy.2017.01.012 ↗
44. Evaluation of paraffin/water emulsion as a phase change slurry for cooling applications10.1016/j.energy.2009.03.016 ↗
45. Recent advances of characterization techniques for the formation, physical properties and stability of Pickering emulsion10.1016/j.cis.2020.102117 ↗
46. Phase inversion emulsification: current understanding and applications10.1016/j.cis.2015.01.001 ↗
47. An experimental data set for benchmarking 1-D, transient heat and moisture transfer models of hygroscopic building materials. Part I: experimental facility and material property data10.1016/j.ijheatmasstransfer.2007.03.026 ↗
48. Research on data-driven identification and prediction of heat response time of urban centralized heating system10.1016/j.energy.2020.118742 ↗