Improvements in the efficiency of p-type bifacial Si solar cells with a rear Cu electrode using galvanic replacement reactions
Source abstract
Abstract
A novel method for fabricating the base metal Cu in an air atmosphere was successfully developed based on thick film screen printing of Al pastes and galvanic replacement reactions. The first thick film screen printed Cu electrode with high conductivity (<10 −6 Ω-cm), which is comparable to thick film Ag electrode, was successfully made in air firing instead of reducing atmosphere firing. In this study, a high-efficiency p-type bifacial PERC solar cells with an industrial typical PERC process flow is introduced, used to apply a screen-printed aluminum finger grid on the rear side of an electrode, instead of a full-area aluminum layer. A novel copper (Cu) technique is used to fabricate the rear Cu electrodes that are substituted for rear Al electrodes in p-type PERC c-Si solar cells. The F.F. and efficiency of the p-PERT solar cell with the novel rear copper electrode can be remarkably improved by this method. The maximum efficiency of the p-type bifacial single crystalline solar cells obtained with this process was 22% for the front Ag side and 19.7% for the rear Cu side illumination under standard testing conditions (STC). The ratio between front and rear side performance was over 89% for all of the solar cells.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Chalcogenide Semiconductor Thin Films · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Review on Metallization in Crystalline Silicon Solar Cells
2. A new method to characterize bifacial solar cells10.1002/pip.2341 ↗
3. Development of Screen-Printable Contacts for Pþemitters in Bifacial Solar Cells
4. >23% high-efficiency tunnel oxide junction bifacial solar cell with electroplated Cu gridlines
5. High efficiency copper electroplated heterojunction solar cells
6. The Use of Cooper Insolar Cell and Modules
7. Reactions in Aqueous Solution
8. Galvanic replacement reactions in metal oxide nanocrystals10.1126/science.1234751 ↗
9. Computation of equilibrium oxidation and reduction potentials for reversible and dissociative electron-transfer reactions in solution
10. Chirality transfer in galvanic replacement reactions10.1021/acs.nanolett.9b03117 ↗
11. Improved fill-factor for the double-sided buried contact bifacial silicon solar cell10.1016/S0927-0248(97)00210-9 ↗
12. Deposition and element fractionation processes during atmospheric pressure laser sampling for analysis by ICP-MS10.1016/S0169-4332(97)00643-0 ↗
13. Galvanic replacement reaction: recent developments for engineering metal nanostructures towards catalytic applications10.1039/C7CC02352A ↗
14. Mechanistic study of galvanic replacement of chemically heterogeneous templates10.1021/acs.chemmater.8b04630 ↗
15. Fully Screen-Printed Bifacial Large Area 22.6% N-type Si Solar Cell with Lightly Doped Ion-Implanted Boron Emitter and Tunnel Oxide Passivated Rear Contact10.1016/j.solmat.2020.110585 ↗
16. Cu metallization of LTCC substrate by co-firing process in N2 atmosphere
17. Modelling of bifacial gain for stand-alone and in-field installed bifacial PV modules10.1016/j.egypro.2016.07.025 ↗