journal article·2022-01

P-type poly-Si/SiO contact by aluminium-induced crystallization of amorphous silicon

Rajiv Sharma, Jozef Szlufcik, Hariharsudan Sivaramakrishnan Radhakrishnan, Jef Poortmans

Publisher page

Abstract

Abstract In this work, we explored aluminium-induced crystallization (AIC) of amorphous Si (a-Si) as a low-temperature alternative to make p-type poly-Si/SiOx contacts for Si solar cells. In this approach, a stack of Al and a-Si deposited on a SiOx-passivated Si wafer surface is annealed at temperatures below 577 °C (the eutectic temperature of Al–Si mixture), which induces the exchange of Al and Si layer positions in the stack and the simultaneous crystallization of a-Si to Al-doped p-type poly-Si, potentially leading to the formation of an Al/poly-Si/SiOx passivating contact. The Al-doped AIC poly-Si has low carrier concentration, and thus to compensate for this, we used highly B-doped a-Si for AIC and could achieve a tenfold increase in the carrier concentration. We found that the typical thickness of 1.5 nm of the passivating SiOx layer is too low for this AIC-based approach, as Al reduces SiOx during the process and degrades its passivation quality. By starting with a thicker SiOx layer, we could demonstrate that AIC poly-Si/SiOx contacts with low contact recombination is achievable. However, the contact characteristic remains non-ohmic. This can be improved by extended annealing after AIC, during which Al diffuses into the Si substrate. The Al diffusion, however, damages the SiOx layer and in turn severely increases contact recombination. We conclude that with AIC poly-Si/SiOx contacts the process window to achieve low contact resistivity and low contact recombination seems to be very narrow, if existing at all.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Silicon Nanostructures and Photoluminescence

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. n-Type Si solar cells with passivating electron contact: identifying sources for efficiency limitations by wafer thickness and resistivity variation10.1016/j.solmat.2017.05.042 ↗
2. Trina Solar Announces New Efficiency Record of 24.58% Efficiency for Mono-crystalline Silicon i-TOPCon Cell | Trina Solar, (n.d.). https://mgr.trinasolar.com/eu-en/resources/newsroom/trina-solar-announces-new-efficiency-record-2458-efficiency-mono-crystalline (accessed October 29, 2020).
3. Jolywood takes TOPCon solar cell to 23.5% conversion efficiency record | PV Tech, (n.d.). https://www.pv-tech.org/news/jolywood-takes-topcon-solar-cell-to-23.5-conversion-efficiency-record (accessed October 29, 2020).
4. 26.1%-efficient POLO-IBC cells: quantification of electrical and optical loss mechanisms10.1002/pip.3098 ↗
5. LONGi sets record of 25.09% for N-Type TOPCon cell efficiency Solar, (n.d.). https://en.longi-solar.com/home/events/press_detail/id/331.html (accessed May 11, 2021).
6. Polysilicon passivated junctions: the next technology for silicon solar cells?10.1016/j.joule.2021.02.013 ↗
7. Ion implantation for poly-Si passivated back-junction back-contacted solar cells10.1109/JPHOTOV.2014.2382975 ↗
8. Elucidation of the layer exchange mechanism in the formation of polycrystalline silicon by aluminum-induced crystallization10.1063/1.373632 ↗
9. Influence of interface and Al structure on layer exchange during aluminum-induced crystallization of amorphous silicon10.1063/1.373727 ↗
10. Nast
11. Polycrystalline silicon films by aluminium-induced crystallisation: growth process vs. silicon deposition method
12. Growth kinetics and crystallographic properties of polysilicon thin films formed by aluminium-induced crystallization10.1016/j.jcrysgro.2007.02.039 ↗
13. Infrared observation of thermally activated oxide reduction within Al/SiOx/Si tunnel diodes10.1063/1.350774 ↗
14. A novel x-ray photoelectron spectroscopy study of the Al/SiO2 interface10.1063/1.335266 ↗
15. Observations of Al2O3 and free silicon at the interface between aluminum films and SiO210.1016/0040-6090(78)90139-6 ↗
16. Impact of boron incorporation on properties of silicon solar cells employing p-type polycrystalline silicon grown by aluminum-induced crystallization
17. Degenerate crystalline silicon films by aluminum-induced crystallization of boron-doped amorphous silicon10.1063/1.4759151 ↗
18. Epitaxial growth of heavily boron-doped Si by Al(B)-induced crystallisation at low temperature for back surface field manufacturing10.1039/c2ce26563j ↗
19. Application of new doping techniques to solar cells for low temperature fabrication
20. Solar cells application of p-type poly-Si thin film by aluminum induced crystallization
21. Development and characterization of silicon-rich nitride layers for silicon solar cell passivating contacts
22. Effect of silicon oxide thickness on polysilicon based passivated contacts for high-efficiency crystalline silicon solar cells10.1016/j.solmat.2018.05.011 ↗
23. Mobility calculator, (n.d.). https://www2.pvlighthouse.com.au/calculators/mobility%20calculator/mobility%20calculator.aspx (accessed June 11, 2021).
24. Kamins · 1998
25. Polycrystalline silicon passivated tunneling contacts for high efficiency silicon solar cells10.1557/jmr.2016.77 ↗
26. Interplay of annealing temperature and doping in hole selective rear contacts based on silicon-rich silicon-carbide thin films10.1016/j.solmat.2017.06.039 ↗
27. Tunnel oxide passivated contacts formed by ion implantation for applications in silicon solar cells10.1063/1.4936223 ↗
28. Passivating contacts for silicon solar cells based on boron-diffused recrystallized amorphous silicon and thin dielectric interlayers10.1016/j.solmat.2016.03.033 ↗
29. Studying dopant diffusion from Poly-Si passivating contacts10.1016/j.solmat.2019.109978 ↗