journal article·2020-03

Highly efficient ternary polymer solar cells based on a novel double-cabled third component with the same molecular fragments of donor and acceptor moieties

Hao Liu, Lixing Xia, Xiaohan Chen, Zongwen Ma, Bing Zhang, Jun Lin, Tasawar Hayat, Ahmed Alsaedi, Zhan'ao Tan

Publisher page

Abstract

Abstract The red-shifting absorption of non-fullerene acceptor materials is the most important reason for the increasing efficiency of polymer solar cells (PSCs). However, the low absorption of non-fullerene materials in the short-wave direction and the full width at half maximum (FWHM) of the absorption spectra for active layer materials are only around 100 nm, which limits the further improvement of power conversion efficiency (PCE). Herein, we report a novel double-cabled material ITLYBT with the same molecular fragments of donor and acceptor moieties. The absorption spectra of ITLYBT are the superimpose of the donor backbones and the acceptor pendants with nearly 200 nm blue-shift caused by the enhanced steric hindrance, which works as an ideal third component for highly efficient ternary PSCs to broaden and complement the absorption spectra of the photoactive layer. By introducing ITLYBT into PBDB-T-2F:ITIC-4F blend, the ternary device shows enhanced Jsc and Voc, and the over PCE increases from 12.50% to 13.14% due to the optimized phased separation and reduced charge recombination. These results indicate that double-cabled molecule is an ideal third component for construction high performance ternary PSCs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. 25th anniversary article: bulk heterojunction solar cells: understanding the mechanism of operation10.1002/adma.201304373 ↗
2. Small molecule semiconductors for high-efficiency organic photovoltaics10.1039/c2cs15313k ↗
3. Single-junction organic solar cell with over 15% efficiency using fused-ring acceptor with electron-deficient core10.1016/j.joule.2019.01.004 ↗
4. Organic solar cells based on non-fullerene acceptors10.1038/nmat5063 ↗
5. Construction of a long range p/n heterojunction with a pair of nanometre-wide continuous D/A phases10.1039/c1nr10410a ↗
6. “Double-cable” conjugated polymers with linear backbone toward high quantum efficiencies in single-component polymer solar cells10.1021/jacs.7b10499 ↗
7. Single-material organic solar cells based on electrospun fullerene-grafted polythiophene nanofibers10.1021/acs.macromol.7b00857 ↗
8. Status and prospects for ternary organic photovoltaics10.1038/nphoton.2015.128 ↗
9. Versatile ternary organic solar cells: a critical review10.1039/C5EE02641E ↗
10. Efficient semitransparent organic solar cells with tunable color enabled by an ultralow-bandgap nonfullerene acceptor10.1002/adma.201703080 ↗
11. Using ternary blend as a strategy to improve the driving force for charge transfer and facilitate electron transport in polymer solar cells10.1016/j.orgel.2018.11.040 ↗
12. Ternary non-fullerene polymer solar cells with efficiency of 11.6% by simultaneously optimizing photon harvesting and phase separation10.1039/C8TA03453B ↗
13. Nonmetallic FeH6 under high pressure10.1021/acs.jpcc.8b04125 ↗
14. Porphyrin-Containing polymer as a superior blue light-absorbing additive to afford high- Jsc ternary solar cells10.1021/acsami.8b19060 ↗
15. Angular-shaped 4,9-dialkylnaphthodithiophene-based octacyclic ladder-type non-fullerene acceptors for high efficiency ternary-blend organic photovoltaics10.1021/acs.chemmater.8b01089 ↗
16. Stepwise structural evolution of a DTS-F2BT oligomer and influence of structural disorder on organic field effect transistors and organic photovoltaic performance10.1021/acs.chemmater.6b03763 ↗
17. Conjugated polymers with tethered electron-accepting moieties as ambipolar materials for photovoltaics10.1002/pi.2244 ↗
18. Single material solar cells: the next frontier for organic photovoltaics?10.1002/aenm.201000008 ↗
19. Synthesis and photovoltaic properties of a donor-acceptor double-cable polythiophene with high content of C60 pendant10.1021/ma070052+ ↗
20. Fast charge separation in a non-fullerene organic solar cell with a small driving force10.1038/nenergy.2016.89 ↗
21. Olaf zeika, dieter neher, christian koerner, donato spoltore, and koen vandewal, reducing voltage losses in cascade organic solar cells while maintaining high external quantum effciencies10.1002/aenm.201700855 ↗
22. Small molecules based on alkyl/alkylthio-thieno[3,2-b] thiophene substituted benzo[1,2-b:4,5-b′]dithiophene for solution-processed solar cells with high performance10.1021/acs.chemmater.5b03889 ↗
23. High-performance organic solar cells based on a small molecule with alkylthio-thienyl-conjugated side chains without extra treatments10.1002/adma.201503815 ↗
24. Fluorination-enabled optimal morphology leads to over 11% efficiency for inverted small-molecule organic solar cells10.1038/ncomms13740 ↗
25. The crucial role of chlorinated thiophene orientation in conjugated polymers for photovoltaic devices10.1002/anie.201807865 ↗
26. Over 14% efficiency in polymer solar cells enabled by a chlorinated polymer donor
27. Polymer bulk heterojunction solar cells employing Förster resonance energy transfer10.1038/nphoton.2013.82 ↗
28. Effect of mono alkoxy-carboxylate-functionalized benzothiadiazole-based donor polymers for non-fullerene solar cells10.1016/j.dyepig.2018.12.058 ↗
29. Engineering the band gap and energy level of conjugated polymers using a second acceptor unit10.1039/C4PY00004H ↗
30. Electrochemical studies of the effects of the size, ligand and composition on the band structures of CdSe, CdTe and their alloy nanocrystals10.1039/c3cp55226h ↗
31. 11.4% Efficiency non-fullerene polymer solar cells with trialkylsilyl substituted 2D-conjugated polymer as donor10.1038/ncomms13651 ↗
32. High-performance solar cells using a solution-processed small molecule containing benzodithiophene unit10.1002/adma.201102790 ↗
33. Determining material-specific morphology of bulk-heterojunction organic solar cells using AFM phase imaging10.1021/acs.jpcc.7b01924 ↗
34. High mobility indium oxide electron transport layer for efficient charge extraction and optimized nano-morphology in organic photovoltaics10.1021/acs.nanolett.8b02452 ↗
35. Optimized fibril network morphology by precise side‐chain engineering to achieve high‐performance bulk‐heterojunction organic solar cells
36. High-performance all-polymer nonfullerene solar cells by employing an efficient polymer-small molecule acceptor alloy strategy10.1016/j.nanoen.2017.04.061 ↗
37. Synthesis and morphological studies of a poly(5,6-difluorobenzo-2,1,3-thiadiazole-4,7-diyl-alt quaterchalcogenophene) copolymer with 7.3% polymer solar cell efficiency10.1039/C4PY00777H ↗
38. Use of two structurally similar small molecular acceptors enabling ternary organic solar cells with high efficiencies and fill factors10.1039/C8EE01700J ↗
39. Modulating molecular orientation enables efficient nonfullerene small-molecule organic solar cells10.1021/acs.chemmater.8b00287 ↗
40. High performance polymer solar cells with as-prepared zirconium acetylacetonate film as cathode buffer layer10.1038/srep04691 ↗
41. Mechanism of recombination losses in bulk heterojunction P3HT:PCBM solar cells studied using intensity modulated photocurrent spectroscopy10.1021/am100998t ↗
42. Role of additional PCBM layer between ZnO and photoactive layers in inverted bulk-heterojunction solar cells10.1038/srep04306 ↗
43. Microseconds, milliseconds and seconds: deconvoluting the dynamic behaviour of planar perovskite solar cells10.1039/C6CP08424A ↗