Comparative study on multiple transmission–reflection infrared spectroscopy and infrared methods for the measurement of substitutional carbon and interstitial oxygen contents of polycrystalline silicon
Source abstract
Abstract
Abstract Multiple transmission–reflection (MTR) infrared (IR) spectroscopy was established as a new IR method to measure the interstitial oxygen and substitutional carbon contents of polycrystalline silicon wafers at ambient temperature. The superiority of MTR–IR to conventional IR was verified through practical measurements of polycrystalline silicon samples. With single incidence, the following characteristics of the former were superior to those of the latter. (1) The areas of the absorption peaks of interstitial oxygen at 1107 cm −1 and substitutional carbon at 605 cm −1 can be amplified linearly with transmission times N between 10 and 12, thereby extending the limit of detection of oxygen and carbon to approximately one order of magnitude lower. (2) The strength of the interference fringes of the baseline can be decreased to 5 times that of the single incidence for a 1 mm polycrystalline silicon slice. (3) In contrast to conventional IR method in which data are gathered from one sampling point at each measurement, MTR–IR collects information from many sampling points in a long sample for one-time measurement. In conclusion, MTR–IR is more sensitive, reliable, and reproducible than the conventional IR method in terms of measuring the interstitial oxygen and substitutional carbon contents of polycrystalline silicon.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Molecular Junctions and Nanostructures · Semiconductor materials and devices · Analytical Chemistry and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Oxygen and carbon behaviors in multi-crystalline silicon and their effect on solar cell conversion efficiency
2. Measurement of carbon concentration in polycrystalline silicon using FTIR10.1149/1.2085631 ↗
3. GB/T 25074-2010, Solar-grade Polycrystalline Silicon, National Standards of the People's Republic of China.
4. GB/T1557-2006, The Method of Determining Interstitial Oxygen Content in Silicon by Infrared Absorption, National Standards of the People's Republic of China.
5. GB/T 1558-2009, Test Method for Substituional Atomic Carbon Content of Silicon by Infrared Absorption, National Standards of the People's Republic of China.
6. Hongbo Liu · 2008
7. Different EDC/NHS activation mechanisms between PAA and PMAA brushes and the following amidation reactions10.1021/la202267p ↗
8. Multiple Transmission-Reflection Infrared (MTR–IR) spectroscopy of arachidic acid LB films on hydrophilic and hydrophobic silicon surfaces10.1021/jp909027e ↗
9. Multiple transmission-reflection infrared spectroscopy for high-sensitivity measurement of molecular monolayers on silicon surfaces10.1021/jp804553x ↗
10. Multiple transmission–reflection infrared spectroscopy for high-sensitivity measurement of molecular monolayers on silicon surfaces10.1021/jp804553x ↗
11. Structural evolution of self-assembled alkanephosphate monolayers on TiO210.1002/cphc.200800381 ↗
12. Sensitive and accurate measurement of interstitial oxygen and substitutional carbon in single crystalline silicon by multiple transmission-reflection infrared spectroscopy (MTR–IR)
13. Growing embossed nanostructures of polymer brushes on wet-etched silicon templated via block copolymers
14. Lu · 2015
15. ASTM F1188-1991, Test Method for Interstitial Atomic Oxygen Content of Silicon by Infrared Absorption, American Society of Testing Materials.
16. ASTM F1391-1993, Test Method for Substitutional Atomic Carbon Content by Infrared Absorption, American Society of Testing Materials.