journal article·2016-08

Thin-film silicon tandem (MICROMORPH™) module design and key reliability topics

V. Cervetto, A. Brunner, O. Caglar, J.S. Cashmore, J. Gauckler, J.E. Hötzel, T. Iwahashi, R. Janot, S. Krull, M.-H. Lindic, O. Nishimaniwa, I. Psimoulis, S. Ristau, F. Roth, H. Schoech, T. Schuhmacher, S. Sellner, I. Sinicco

Publisher page

Abstract

Abstract Thin-film silicon tandem (MICROMORPH™) module design optimization process for performance maximization is described together with an analysis of some key reliability topics. In the first part, the procedure for module layout optimization to achieve the maximum module power output is described. In monolithic thin-film modules the layout is realized through a laser scribing interconnection process: a well-controlled laser scribing process is therefore essential to ensure optimal module performance and to minimize unwanted losses. The second part of the paper focuses on some of the materials used in the fabrication of a solar cell and module of such technology and the processes used to achieve such module assembly, as well as a description of some of the possible failure modes. Special attention is paid to the zinc oxide transparent conductive oxide (ZnO TCO) layers used for the front and back contacts. The bottom cell (BoCe) and its stability is also analyzed in detail: the influence of process parameters on the BoCe degradation behavior including the differences observed using different thin-film silicon (TF-Si) deposition reactor types, different lamination foils and the impact using different front contact haze is discussed. In the final part of the paper the effect of particle contamination on the module performance is reviewed: specifically contamination by particles generated during deposition and handling processes. Finally relevant countermeasures to prevent additional module performance loss are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Photovoltaic System Optimization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Tobias Roschek, Marco Apolloni, Antonio Braga, Adrian Brunner, Onur Caglar, Julian S. Cashmore, et al., MICROMORPH technology, in: Proceedings of the Introduction and the Path to Record Efficiencies, 2015, 〈http://dx.doi.org/10.13140/RG.2.1.1628.8804〉
2. H.J. Booth, A. Gahler, T. Witte, Next generation of laser scribing technology for grid-parity and beyond, in: Proceedings of the 25th European Photovoltaic Solar Energy Conference and Exhibition and 5th World Conference Photovoltaic Energy Conversion , Valencia, Spain, 6–10 September 2010, pp. 3213–3216, 〈http://dx.doi.org/10.4229/25thEUPVSEC2010-3AV.2.22〉.
3. A detailed study of monolithic contacts and electrical losses in a large-area thin-film module10.1002/pip.589 ↗
4. Simulation of losses in thin-film silicon modules for different configurations and front contacts10.1002/pip.831 ↗
5. Light management in large area thin-film silicon solar modules10.1016/j.solmat.2015.07.018 ↗
6. Humid environment stability of low pressure chemical vapor deposited boron doped zinc oxide used as transparent electrodes in thin film silicon solar cells10.1016/j.tsf.2011.06.095 ↗
7. A new view of microcrystalline silicon: the role of plasma processing in achieving a dense and stable absorber material for photovoltaic applications10.1002/adfm.201200299 ↗
8. Peter Cuony, Optical layers thin-film silicon solar cells, 2011, 〈http://dx.doi.org/10.5075/epfl-thesis-5190〉
9. V. Hagemann, U. Weber, R. Walter, E. Diegel, H. Popp, D. Lundszien, et al., Status of the development of micromorph cells and modules at schott solar thin film GmbH, in: Proceedings of the 25th European Photovoltaic Solar Energy Conference and Exhibition and 5th World Conference Photovoltaic Energy Conversion, Valencia, Spain, 6–10 September 2010, pp. 2788–2792, 〈http://dx.doi.org/10.4229/25thEUPVSEC2010-3CO.13.2〉.
10. Origin of the improved performance of high-deposition-rate microcrystalline silicon solar cells by high-pressure glow discharge10.1143/JJAP.42.L901 ↗
11. The evolution of silicon Wafer Cleaning Technology10.1149/1.2086825 ↗
12. Laser processing in industrial solar module manufacturing10.2961/jlmn.2010.03.0001 ↗
13. O. Breitenstein, J.P. Rakotoniaina, M. Kaes, S. Seren, T. Pernau, G. Hahn, et al., Lock-In thermography – a universal tool for local analysis of solar cells, in: Proceedings of the 20th European Photovoltaic Solar Energy Conference, Barcelona, Spain, 2005, pp. 590–593.
14. Y. Gupta, H. Liers, S. Woods, S. Young, R. DeBlasio, L. Mrig, Optimization of a-Si solar cell current collection, in: Proceedings of the 16th IEEE Photovoltaic Specialists Conference, San Diego, USA, 1982, pp. 1092–1101.
15. 2008
16. IEC 61730–1 Ed. 1 (Section 9.2 Creepage and clearance distances). Photovoltaic (PV) Module Safety Qualification – Part 1: Requirements for Construction, 2014.
17. Modelling of infrared optical constants for polycrystalline low pressure chemical vapour deposition ZnO:B films10.1063/1.4795809 ↗
18. Relaxing the conductivity/transparency trade-off in MOCVD ZnO thin films by hydrogen plasma10.1002/adfm.201203541 ↗
19. I. Sinicco, T. Schuhmacher, K. Proost, Impact of polymer stabilization compounds in EVA encapsulation foils on long-term module performance, in: N.G. Dhere, J.H. Wohlgemuth, K.W. Lynn (Eds.), 2011, pp. 81120C–81120C–14, 〈http://dx.doi.org/10.1117/12.894616〉.10.1117/12.894616 ↗
20. T. Crawford M. Gossla H. Knauss S. Krull B. Mayer I. Sinicco, et al., Benefits of high reflectivity encapsulants in combination with LPCVD Zno back contact, 2010, 〈http://dx.doi.org/10.4229/25thEUPVSEC2010-4AV.3.37〉
21. E.L. Salabas, O. Caglar, J.S. Cashmore, I. Sinicco, ZnO:B back contact electrode with improved stability against potential induced degradation, 2016 (In preperation), Further information will be made available at: 〈http://thinfilmsiliconpv.ch〉, (n.d.).
22. F.J. Pern, R. Noufi, B. To, C. DeHart, X. Li, S.H. Glick, Degradation of ZnO-based window layers for thin-film CIGS by accelerated stress exposures, in: N.G. Dhere (Ed.), 2008, pp. 70480P–70480P–14, 〈http://dx.doi.org/10.1117/12.795097〉.10.1117/12.795097 ↗
23. J.E. Hötzel, G.-F. Leu, M.-H. Lindic, B. Mereu, T. Mates, J. Kalas, et al., Microcrystalline bottom cells in large area thin film silicon MICROMORPH™ solar modules, 2016 (In preperation), Further information will be made available at: 〈http://thinfilmsiliconpv.ch〉, (n.d.).10.1016/j.solmat.2016.05.043 ↗