journal article·2021-09

Spreading resistance modeling for rapid extraction of contact resistivity with a four-point probe

Deniz Turkay, Konstantin Tsoi, Ergi Donercark, Rasit Turan, Selcuk Yerci

Publisher page

Abstract

Extraction of contact resistivity ( ρ c ) with the four-point probe (4PP) method requires considerably fewer fabrication and measurement steps compared to conventional alternatives (e.g. the transfer length method, TLM). Yet, the method is rarely used, mainly due to the requirement of 3D simulations used in the data fitting procedure. Moreover, a work analyzing the details of the method, which can provide a quantitative guideline to the users, is lacking in the literature. In this work, we show that the 3D simulations can be replaced with a spreading resistance model (SRM) implemented in a numerical calculation platform (e.g. MATLAB). Using the SRM, we achieve drastically short calculation durations (<1 s) compared to durations of 3D simulations based on the finite element method. We show that the resolution and reliability of the extracted ρ c depends critically on geometrical and electrical parameters of the system, such as the probe tip spacing and sheet resistances of the layers. We also present an alternative measurement procedure that is fully based on 4PP measurements of only one substrate, which eliminates the need for an eddy-current measurement or an additional set of dedicated samples. We demonstrate the viability of the 4PP method in experiments by comparing the results with those obtained by the TLM, for ρ c between 5 × 10 −3 to 1 × 10 0 Ω cm 2. Lastly, we provide a free software that can execute the calculations discussed herein.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Surface and Thin Film Phenomena · Advancements in Semiconductor Devices and Circuit Design · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Contact selectivity and efficiency in crystalline silicon photovoltaics10.1109/JPHOTOV.2016.2598267 ↗
2. Charge carrier collection and contact selectivity in solar cells10.1002/admi.201900252 ↗
3. Contact resistance and contact resistivity10.1149/1.2404240 ↗
4. Schroder · 2006
5. 24.7% Record efficiency HIT solar cell on thin silicon wafer10.1109/JPHOTOV.2013.2282737 ↗
6. Laser contact openings for local poly-Si-metal contacts enabling 26.1%-efficient POLO-IBC solar cells10.1016/j.solmat.2018.06.020 ↗
7. Both sides contacted silicon solar cells: options for approaching 26% efficiency, 36th eur. PV sol
8. Recombination behavior and contact resistance of n+ and p+ poly-crystalline Si/mono-crystalline Si junctions10.1016/j.solmat.2014.06.003 ↗
9. Magnetoresistance measurement of unpatterned magnetic tunnel junction wafers by current-in-plane tunneling10.1063/1.1590740 ↗
10. Perpendicular magnetic anisotropy at transition metal/oxide interfaces and applications10.1103/RevModPhys.89.025008 ↗
11. Silicon heterojunction solar cells combining an a-Si:H (n) electron-collector with a PEDOT:PSS hole-collector10.1016/j.egypro.2016.07.030 ↗
12. A spreading resistance technique for resistivity measurements on silicon10.1149/1.2423927 ↗
13. Spreading resistance:A quantitative tool for process control and development
14. Characterization of electrically active dopant profiles with the spreading resistance probe10.1016/j.mser.2004.12.002 ↗
15. The relation between two-probe and four-probe resistances on nonuniform structures10.1149/1.2115592 ↗
16. An alternative approach to the calculation of four-probe resistances on nonuniform structures10.1149/1.2113598 ↗
17. The 100th anniversary of the four-point probe technique: the role of probe geometries in isotropic and anisotropic systems10.1088/0953-8984/27/22/223201 ↗
18. Resistivity measurements on germanium for transistors10.1109/JRPROC.1954.274680 ↗
19. Geometrical correction factor for semiconductor resistivity measurements by four-point probe method10.1143/JJAP.23.1499 ↗
20. COMSOL MultiphysicsTM Reference Manual, v. 5.3, (n.d.).
21. The use of a four-point probe for profiling sub-micron layers10.1016/0038-1101(78)90347-7 ↗
22. Influence of some geometric factors on contact resistance probe measurements10.1109/TCHMT.1980.1135578 ↗
23. Spreading resistance correction factors10.1016/0038-1101(69)90092-6 ↗
24. The role of source boundary condition in spreading resistance calculations10.1016/0038-1101(78)90291-5 ↗
25. Improved variational method for spreading resistance calculations10.1016/0038-1101(86)90199-1 ↗
26. Spreading resistance calculations by the variational method10.1016/0038-1101(81)90076-9 ↗
27. The spreading resistance of an inhomogeneous slab with a disc electrode as a mixed boundary value problem10.1016/0038-1101(79)90014-5 ↗
28. On the calculation of spreading resistance correction factors10.1016/0038-1101(76)90053-8 ↗
29. An efficient integration technique for use in the multilayer analysis of spreading resistance profiles10.1149/1.2127565 ↗
30. MATLAB, “Version 9.9 (R2020b).” The MathWorks Inc., Natick, Massachusetts, 2020.
31. 4PP Method Calculator, (n.d.). app.mnt.metu.edu.tr/download.
32. Optimized electrode configuration for current-in-plane characterization of magnetic tunnel junction stacks10.1088/1361-6501/aa4fb2 ↗