Al2O3-TiOx as full area passivating contacts for silicon surfaces utilizing oxygen scavenging titanium interlayers
Source abstract
Abstract
Abstract Full area transparent contacts are the next step in order to enhance the efficiency of silicon based passivated emitter rear cells. Here we present a full area contact based on Al2O3 and reduced TiOx. The thin Al2O3 acts as passivating tunneling layer, whereas the TiOx is used for charge carrier transport. This work provides a way to enhance the conductivity of TiOx by forming gas annealing (FGA) and doping with tantalum. Furthermore, it addresses the native SiOx without chemical treatment. A thin titanium interlayer (Ti-IL) serves this purpose. Current-voltage measurements reveal a contact resistance of 30 Ωcm2 for 50 nm of pure TiOx. Ta-doping combined with a 6 nm thick Ti-IL reduces the contact resistance by two orders of magnitude down to 0.36 Ωcm2. The passivation by an Al2O3/TiOx layer stack leads to an excellent surface recombination velocity (SRV) of 5.6 cm/s with only 3 nm Al2O3 but results in a large contact resistance of about 100 Ωcm2. This contact resistance can be reduced by three orders of magnitude down to 0.25 Ωcm2 including a 10 nm Ti-IL while still providing a sufficient SRV of about 60 cm/s. The absorption coefficient of 6.3×105 cm−1 inhibits the usage as front contact for solar cells. However, it could be used as a backside contact, since the transmission is less important on the backside of a monofacial solar cell.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Nanowire Synthesis and Applications · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Development of the PERC solar cell10.1109/JPHOTOV.2019.2899460 ↗
2. Surface passivation of high-efficiency silicon solar cells by atomic-layer-deposited Al2O310.1002/pip.823 ↗
3. Passivated rear contacts for high-efficiency n-type Si solar cells providing high interface passivation quality and excellent transport characteristics10.1016/j.solmat.2013.09.017 ↗
4. Tunnel oxide passivated contacts as an alternative to partial rear contacts10.1016/j.solmat.2014.06.015 ↗
5. The application of poly-Si/SiOx contacts as passivated top/rear contacts in Si solar cells10.1016/j.solmat.2016.09.015 ↗
6. Glunz · 2015 · 259
7. Passivating contacts for crystalline silicon solar cells: from concepts and materials to prospects10.1109/JPHOTOV.2018.2797106 ↗
8. High and low work function materials for passivated contacts10.1016/j.egypro.2015.07.037 ↗
9. Hole selective MoOx contact for silicon solar cells10.1021/nl404389u ↗
10. Contact selectivity engineering in a 2 μm thick ultrathin c-Si solar cell using transition-metal oxides achieving an efficiency of 10.8
11. High-performance TiO2-based electron-selective contacts for crystalline silicon solar cells10.1002/adma.201600926 ↗
12. Band alignment of rutile and anatase TiO210.1038/nmat3697 ↗
13. Al2O3-TiO2 nanolaminates for conductive silicon surface passivation10.1109/JPHOTOV.2015.2494695 ↗
14. Excellent passivation of silicon surfaces by thin films of electron-beam-processed titanium dioxide10.1109/JPHOTOV.2017.2749975 ↗
15. Symmetrical Al2O3-based passivation layers for p- and n-type silicon10.1016/j.solmat.2014.06.005 ↗
16. Atomic layer deposited high-κ nanolaminates for silicon surface passivation10.1116/1.4863499 ↗
17. Towards full-area passivating contacts for silicon surfaces based on Al2O3-TiOx double layers
18. Tröger · 2018 · 426
19. Industrial silicon solar cells applying the passivated emitter and rear cell (PERC) concept—a review10.1109/JPHOTOV.2016.2571627 ↗
20. Swanson · 1969 · 196
21. Evaluation of series resistance losses in screen-printed solar cells with local rear contacts10.1109/JPHOTOV.2011.2163925 ↗
22. High-k/metal gate innovations enabling continued CMOS scaling
23. Overcoming challenges to the formation of high-quality polycrystalline TiO2:Ta transparent conducting films by magnetron sputtering10.1063/1.4819088 ↗
24. Atomic control of conductivity versus ferromagnetism in wide-gap oxides via selective doping: V, Nb, Ta in anatase TiO210.1103/PhysRevLett.100.036601 ↗
25. Practical doping principles10.1063/1.1584074 ↗
26. Comparative study of ITO and TiN fabricated by low-temperature RF biased sputtering10.1116/1.4936257 ↗
27. Characterisation and optimisation of indium tin oxide films deposited by pulsed DC magnetron sputtering for heterojunction silicon wafer solar cell applications10.1016/j.egypro.2013.05.044 ↗
28. R.f. magnetron-sputtered indium tin oxide film on a reactively ion-etched acrylic substrate10.1016/0040-6090(93)90357-U ↗
29. Comparative study of ITO layers deposited by DC and RF magnetron sputtering at room temperature10.1016/j.jnoncrysol.2005.11.088 ↗
30. New understanding of the difference of photocatalytic activity among anatase, rutile and brookite TiO210.1039/C4CP02201G ↗
31. Structural, optical and Raman scattering studies on DC magnetron sputtered titanium dioxide thin films10.1016/j.solmat.2004.03.008 ↗
32. Effects of annealing treatment on optical properties of anatase TiO2 thin films
33. Determination and analysis of dispersive optical constant of TiO2 and Ti2O3 thin films10.1016/j.apsusc.2005.10.040 ↗
34. Optical properties and electronic structure of amorphous Ge and Si10.1016/0025-5408(68)90023-8 ↗
35. RF magnetron sputtering aluminum oxide film for surface passivation on crystalline silicon wafers
36. ALD Al2O3 based nanolaminates for solar cell applications
37. On the control of the fixed charge densities in Al2O3 -based silicon surface passivation schemes10.1021/acsami.5b06606 ↗
38. Measuring and interpreting the lifetime of silicon wafers10.1016/j.solener.2003.07.033 ↗
39. Structural properties of Al–O monolayers in SiO2 on silicon and the maximization of their negative fixed charge density10.1021/acsami.8b06098 ↗
40. Deactivation of silicon surface states by Al-induced acceptor states from Al–O monolayers in SiO 210.1063/1.5054703 ↗
41. Thermal activation and deactivation of grown-in defects limiting the lifetime of float-zone silicon10.1002/pssr.201600080 ↗