Angular reflection study to reduce plasmonic losses in the dielectrically displaced back reflectors of silicon solar cells
Source abstract
Abstract
Abstract Metals are an integral part of solar cell structures—as a metal contact and/or a back reflector. However it is a less known fact that there are plasmonic losses associated with these structures and it is important to minimise such losses especially when placed in proximity to scattering media like textures on the front of the cell that can introduce an angular dependence to the light incident on the rear. This study investigates the losses in a metal reflector when placed adjacent to a dielectric layer in a typical solar cell rear geometry. The experimental measurement was realised using a novel custom built optical setup for characterising intensity of the reflected light at various internal incident angles at the Si–dielectric interface. Our results show that the thickness of the dielectric layer, the refractive index of the dielectric layer and the type of the rear metal can all affect the degree of such losses and the distribution of the angular reflection. Both measured and simulation results indicate that a 250–320 nm SiO2 along with an Ag back reflector gives the best internal rear angular reflection in Si but is dependant on the wavelength of interest. It also shows that textured or scattering front interfaces with internal incident angles greater than 28° have the potential to provide light trapping through total internal reflection and at the same time minimise plasmonic losses at the metal reflector interface.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Silicon Nanostructures and Photoluminescence
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Silicon solar cells: evolution, high-efficiency design and efficiency enhancements10.1088/0268-1242/8/1/001 ↗
2. H. Raether, Surface Plasmons on Smooth and Rough Surfaces and on Gratings, Springer-Verlag, NewYork, p. 16
3. Understanding light trapping by light scattering textured back electrodes in thin film n–i–p-type silicon solar cells10.1063/1.2751117 ↗
4. Attenuated-total-reflection predictions to surface-plasmon resonance in a layered structure10.1063/1.1991977 ↗
5. Excitation of nonradiative surface plasma waves in silver by the method of frustrated total reflection10.1007/BF01391532 ↗
6. Campbell · 1989
7. Novotny · 2006
8. Compensation of loss in propagating surface plasmon polariton by gain in adjacent dielectric medium10.1364/OE.16.001385 ↗
9. Silicon solar cells: advanced principles and practice
10. Wang · 1992
11. Harrison · Solid State Theory · 1970
12. Heaven · 1954 · 46
13. http://www.jawoollam.com/wvase.html.
14. Optical properties of metallic films for vertical-cavity optoelectronic devices10.1364/AO.37.005271 ↗
15. Y. Yang, H. Mehrvarz, H. Kampwerth, A. Ho-Baillie, M.A. Green, Novel planar rear surface reflector design for crystalline silicon solar cells, in: Proceedings of the 26th European Photovoltaic Solar Energy Conference and Exhibition, Hamburg, Germany, October 2011.
16. 24% Efficient PERL silicon solar cell: recent improvements in high efficiency silicon cell research10.1016/0927-0248(95)00117-4 ↗
17. Surface passivation of crystalline silicon solar cells: a review10.1002/1099-159X(200009/10)8:5<473::AID-PIP337>3.0.CO;2-D ↗
18. Enhanced evanescent mode light trapping in organic solar cells and other low index optoelectronic devices10.1002/pip.1038 ↗
19. Lambertian light trapping in textured solar cells and light-emitting diodes: analytical solutions10.1002/pip.404 ↗