journal article·2021-04

Highly reproducible c-Si texturing by metal-free TMAH etchant and monoTEX agent

Wensheng Liang, Teng Kho, Jingnan Tong, Parvathala Narangari, Stephane Armand, Marco Ernst, Daniel Walter, Sachin Surve, Matthew Stocks, Andrew Blakers, Kean Chern Fong

Publisher page

Abstract

Abstract Surface texturing of a silicon solar cell is critical to provide surface antireflection and light trapping. The common texturing method based on KOH as an etchant with isopropyl alcohol (IPA) as a wetting agent suffers two disadvantages: introducing metal contamination and low repeatability. To circumvent the limitation of the KOH-IPA method, we develop a new texturing regime by substituting TMAH for KOH, and a commercial surfactant RENA monoTEX for IPA. This TMAH-monoTEX method shows advantages of non-metal contamination, high reproducibility, short process time and small random pyramids. IBC solar cells fabricated with the TMAH-monoTEX texture achieved an efficiency of 25% with Jsc of 42.9 mA/cm2, Voc of 719 mV and FF of 81.1%.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Light trapping structures for silicon solar cells via inkjet printing10.1002/pssa.201330654 ↗
2. Optical properties of the COMSAT non-reflective cell
3. Texturing industrial multicrystalline silicon solar cells10.1016/j.solener.2003.08.019 ↗
4. Honeycomb-textured structures on crystalline silicon surfaces for solar cells by spontaneous dry etching with chlorine trifluoride gas10.1016/j.solmat.2007.06.009 ↗
5. Alivizatos · 2013
6. Novel low-cost approach for removal of surface contamination before texturization of commercial monocrystalline silicon solar cells10.1016/j.solmat.2007.03.025 ↗
7. Research and development efforts on texturization to reduce the optical losses at front surface of silicon solar cell10.1016/j.rser.2016.07.065 ↗
8. Advanced alkaline texturing and cleaning for PERC and SHJ solar cells10.1016/j.egypro.2017.09.409 ↗
9. Comparison of mechanical and ultrasonic agitation methods for mono c-Si texturing10.1002/pssa.201600205 ↗
10. KOH/surfactant as an alternative to KOH/IPA for texturisation of monocrystalline silicon
11. Fast alkaline etching of monocrystalline wafers in KOH/CHX
12. New surfactants for combined cleaning and texturing of mono-crystalline silicon wafers after wire-sawing
13. Effects of various ion-typed surfactants on silicon anisotropic etching properties in KOH and TMAH solutions10.1016/j.sna.2004.09.017 ↗
14. Fast alkaline texturing process for high throughput PERC solar cell manufacturing
15. TMAH texturisation and etching of interdigitated back-contact solar cells
16. Texturization of mono-crystalline silicon solar cells in TMAH without the addition of surfactant10.1088/1674-4926/31/10/106002 ↗
17. Experiments on anisotropic etching of Si in TMAH10.1016/S0927-0248(00)00156-2 ↗
18. Effect of acid-based chemical polish etching on the performance of silicon heterojunction solar cells10.1002/pssc.200982699 ↗
19. A comparison of cleaning procedures for removing potassium from wafers exposed to KOH10.1109/16.182503 ↗
20. Improved cleaning process for textured 25 m flexible mono-crystalline silicon heterojunction solar cells with metal backing
21. An optimized texturing process for silicon solar cell substrates using TMAH10.1016/j.solmat.2004.09.020 ↗
22. Effects of textured morphology on the short circuit current of single crystalline silicon solar cells: evaluation of alkaline wet-texture processes10.1016/j.cap.2008.12.014 ↗
23. Improving efficiency of silicon heterojunction solar cells by surface texturing of silicon wafers using tetramethylammonium hydroxide10.1016/j.jpowsour.2014.06.088 ↗
24. Exceptional silicon surface passivation by an ONO dielectric stack10.1016/j.solmat.2018.05.061 ↗
25. A new approach for improving the silicon texturing process using gas-lift effect10.1088/0022-3727/45/10/105102 ↗
26. Etch rates of (100),(111) and (110) single-crystal silicon in TMAH measured in situ by laser reflectance interferometry10.1016/S0924-4247(00)00309-5 ↗
27. The effect of isopropyl alcohol on etching rate and roughness of (1 0 0) Si surface etched in KOH and TMAH solutions10.1016/S0924-4247(01)00648-3 ↗
28. Quantifying the optical losses in back-contact solar cells
29. OPAL 2: rapid optical simulation of silicon solar cells
30. Control of random texture of monocrystalline silicon cells by angle-resolved optical reflectance10.1016/j.solmat.2004.07.040 ↗
31. Reflection distributions of textured monocrystalline silicon: implications for silicon solar cells10.1002/pip.2186 ↗
32. The effect of small pyramid texturing on the enhanced passivation and efficiency of single c-Si solar cells10.1039/C6RA05321A ↗
33. Influence of small size pyramid texturing on contact shading loss and performance analysis of Ag-screen printed mono crystalline silicon solar cells10.1016/j.mssp.2018.05.039 ↗
34. Isotextured silicon solar cell analysis and modeling 2: recombination and device modeling10.1109/JPHOTOV.2012.2204390 ↗
35. Dielectric surface passivation for silicon solar cells: a review10.1002/pssa.201700293 ↗
36. The influence of orientation and morphology on the passivation of crystalline silicon surfaces by Al2O310.1016/j.egypro.2014.08.055 ↗
37. A freeware 1D emitter model for silicon solar cells
38. Excellent ONO passivation on phosphorus and boron diffusion, demonstrating 25% efficient IBC solar cell10.1002/pip.3310 ↗
39. Design, fabrication and characterisation of a 24.4% efficient interdigitated back contact solar cell10.1002/pip.2556 ↗