journal article·2018-12Open access

Avoiding blistering in Al2O3 deposited on planar and black Si

Beniamino Iandolo, Rasmus S. Davidsen, Ole Hansen

Abstract

Aluminum oxide (Al2O3) fabricated by atomic layer deposition (ALD) has during the last decade emerged as an excellent surface passivation material for both planar and micro/nanostructured silicon. The post-ALD thermal treatment required to activate the surface passivation of Al2O3 results often in blistering and film delamination. Here, we studied how several fabrication steps affect blistering and the quality of surface passivation by Al2O3. Decreasing the fraction of blistered area on planar Si surfaces results in lower surface recombination velocity, in agreement with previous reports. By using simple analytical expressions, we estimated that surface recombination is at least 20 times faster at the blisters than at the non-blistered areas. Exposing the Si surface to a reactive ion etch (RIE) treatment as short as 30 s is enough to suppress blistering. Anti-reflective nanostructured Si (black Si) fabricated using the same RIE process by increasing the RIE time does not suffer from blistering either. Finally, we investigated the effective lifetime of black Si textured surfaces and we implemented a pre-ALD conditioning routine that dramatically improves the quality of passivation by Al2O3 on black Si.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Semiconductor materials and devices · Silicon and Solar Cell Technologies · Integrated Circuits and Semiconductor Failure Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Surface passivation of crystalline silicon solar cells: a review10.1002/1099-159X(200009/10)8:5<473::AID-PIP337>3.0.CO;2-D ↗
2. Dielectric surface passivation for silicon solar cells: a review
3. High-efficiency silicon solar cells10.1109/T-ED.1984.21589 ↗
4. Status and prospects of Al2O3 -based surface passivation schemes for silicon solar cells10.1116/1.4728205 ↗
5. On the surface passivation of c-silicon by RF sputtered Al2O3 for solar cell application10.1007/s10854-014-2439-4 ↗
6. RF magnetron sputtering aluminum oxide film for surface passivation on crystalline silicon wafers10.1155/2013/792357 ↗
7. High quality aluminum oxide passivation layer for crystalline silicon solar cells deposited by parallel-plate plasma-enhanced chemical vapor deposition10.1143/APEX.3.012301 ↗
8. Advances in the surface passivation of silicon solar cells10.1016/j.egypro.2012.02.004 ↗
9. D. Kania, P. Saint-cast, D. Wagenmann, M. Hofmann, J. Rentsch, R. Preu, Industrial negatively charged c-Si surface passivation by inline PECVD AlO, 2009, pp. 2275–2278.
10. Low-temperature surface passivation of silicon for solar cells10.1149/1.2096673 ↗
11. Very low surface recombination velocities on p-type silicon wafers passivated with a dielectric with fixed negative charge10.1016/j.solmat.2006.04.014 ↗
12. Silicon surface passivation by atomic layer deposited Al2O310.1063/1.2963707 ↗
13. On the surface passivation mechanism by the negative-charge-dielectric on the c -Si surface passivation mechanism by the negative-charge- dielectric Al2O3
14. Solar energy materials & solar cells efficiency loss mechanisms analysis and roadmap to 24%10.1016/j.solmat.2016.11.018 ↗
15. High efficiency n-type Si solar cells on Al2O3-passivated boron emitters10.1063/1.2945287 ↗
16. High-efficiency n-type HP mc silicon solar cells10.1109/JPHOTOV.2017.2714139 ↗
17. The black silicon method: a universal method for determining the parameter setting of a fluorine-based reactive ion etcher in deep silicon trench etching with profile control10.1088/0960-1317/5/2/015 ↗
18. Black silicon solar cells with interdigitated back-contacts achieve 22.1% efficiency10.1038/nnano.2015.89 ↗
19. Black silicon laser-doped selective emitter solar cell with 18.1% efficiency10.1016/j.solmat.2015.10.018 ↗
20. Black nonreflecting silicon surfaces for solar cells10.1063/1.2204573 ↗
21. Plasma-free dry-chemical texturing process for high-efficiency multicrystalline silicon solar cells10.1016/j.egypro.2016.07.113 ↗
22. Angle resolved characterization of nanostructured and conventionally textured silicon solar cells10.1016/j.solmat.2015.04.001 ↗
23. R.S. Davidsen, P.T. Tang, I. Mizushima, S. Thorsteinsson, P.B. Poulsen, J. Frausig, O. Nordseth, O. Hansen, Black silicon solar cells with black bus-bar strings, in: Proceedings of Conf. Rec. IEEE Photovolt. Spec. Conf., 2016–Novem 〈http://dx.doi.org/10.1109/PVSC.2016.7750183〉, 2016, pp. 2885–2888.10.1109/PVSC.2016.7750183 ↗
24. Black silicon photovoltaics10.1002/9783527665662.ch5 ↗
25. Black silicon photovoltaics10.1002/adom.201400395 ↗
26. Effect of substrate pretreatments on the atomic layer deposited Al2O 3 passivation quality10.1116/1.4901456 ↗
27. Blistering of atomic layer deposition Al2O3 layers grown on silicon and its effect on metal-insulator-semiconductor structures
28. Deleterious electrostatic interaction in silicon passivation stack between thin ALD Al2O3 and its a-SiNX:H capping layer: numerical and experimental evidences10.1016/j.egypro.2017.09.328 ↗
29. Mechanical and thermal properties of physical vapour deposited alumina films10.1023/B:JMSC.0000035318.95497.d1 ↗
30. In situ study of the initiation of hydrogen bubbles at the aluminium metal / oxide interface10.1038/nmat4336 ↗
31. Blistering mechanisms of atomic-layer-deposited AlN and Al2O3 films
32. L. Hennen, E.H. a Granneman, W.M.M. Kessels, Analysis of blister formation in spatial ALD Al2O3 for silicon surface passivation, in: Proceedings of 38th IEEE Photovolt. Spec. Conference (PVSC), 2012 〈http://dx.doi.org/10.1109/PVSC.2012.6317783〉, 2011, pp. 1049–1054.10.1109/PVSC.2012.6317783 ↗
33. B. Vermang, H. Goverde, On the blistering of atomic layer deposited Al2O3 as Si surface passivation, … (PVSC), 2011 37th …. 162106 〈http://dx.doi.org/10.1109/PVSC.2011.6185916〉, 2011, pp. 3562–3567.10.1109/PVSC.2011.6185916 ↗
34. Blistering in ALD Al2O3passivation layers as rear contacting for local Al BSF Si solar cells10.1016/j.solmat.2012.01.032 ↗
35. S. Li, P. Repo, G. Von Gastrow, Y. Bao, H. Savin, Effect of ALD reactants on blistering of aluminum oxide films on crystalline silicon, in: Conference Rec. IEEE Photovolt. Spec. Conference, 2013.10.1109/PVSC.2013.6744371 ↗
36. F. Lebreton, A. Zauner, P. Bulkin, F. Silva, S. Filonovich, P.R. i Cabarrocas, Benefits of a thermal drift during atomic layer deposition of Al2O3 for c-Si passivation, in: Proceedings of 43rd IEEE Photovolt. Spec. Conference 〈http://dx.doi.org/10.1021/la503406v〉, 2017.10.1109/PVSC.2017.8366269 ↗
37. Analysis of the atomic layer deposited Al2O3 field-effect passivation in black silicon10.1016/j.solmat.2015.05.027 ↗
38. Low surface damage dry etched black silicon10.1063/1.4993425 ↗
39. Plasma-free dry-chemical texturing process for high-efficiency multicrystalline silicon solar cells10.1016/j.egypro.2016.07.113 ↗