journal article·2016-12

Preparation and investigation on density and surface tension of quaternary bromides for concentrating solar power

Yaxuan Xiong, Jianfeng Shi, Yuting Wu, Chongfang Ma, Hongbing Chen

Publisher page

Abstract

Abstract In order to improve the unsteady high temperature heat transfer performance of receivers in solar thermal power stations the receivers should be optimized further. High temperature could help to optimize heat transfer of the receiver. Based the selection of heat pipes and bromides this work prepared six samples of quaternary bromides with different composition ratios of KBr, LiBr, NaBr, and CaBr2 and their density and surface tension were measured and analyzed. Experimental results show that density of quaternary bromides shows very good linearity with salt temperature, and density of quaternary bromides is higher than that of Solar salt at a same temperature. Also, quaternary bromide NO.2 has maximum density, and quaternary bromide NO.3 has minimum thermal expansion coefficient while quaternary bromide NO.6 has the minimum density and maximum thermal expansion coefficient at the same temperature. In addition, quaternary bromide NO.1 has a maximum surface tension and fitting curve slope at a same temperature among the six samples of quaternary bromides. Their density and surface tension were fitted with linear fit with their temperature respectively. Furthermore, that the composition ratio has evident influence on the density and surface tension of quaternary bromides has been concluded.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solar Thermal and Photovoltaic Systems · Phase Change Materials Research · Radiative Heat Transfer Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Performance enhancement of high temperature latent heat thermal storage systems using heat pipes with and without fins for concentrating solar thermal power plants10.1016/j.renene.2015.11.068 ↗
2. Discharging process of a finned heat pipe–assisted thermal energy storage system with high temperature phase change material10.1016/j.enconman.2016.04.025 ↗
3. Thermal analysis of a heat pipe solar central receiver for concentrated solar power tower10.1016/j.applthermaleng.2016.04.043 ↗
4. Separate-type heat pipe solar receivers for concentrating solar power
5. Improving the thermal properties of ternary carbonates for concentrating solar power through simple chemical modifications by adding sodium hydroxide and nitrate10.1016/j.solmat.2014.01.025 ↗
6. Molten salts: volume 3 nitrates, nitrites, and mixtures: electrical conductance, density, viscosity, and surface tension data10.1063/1.3253103 ↗
7. Density measurement of molten silicon by an improved Archimedian method10.1016/0022-0248(94)90170-8 ↗
8. The preparation and properties of multi-component molten salts10.1016/j.apenergy.2009.06.022 ↗
9. Multicomponent molten salt mixtures based on nitrate/nitrite anions10.1115/1.4003418 ↗
10. Development of molten salt heat transfer fluid with low melting point and high thermal stability10.1115/1.4004243 ↗
11. Material aspects of solar salt for sensible heat storage10.1016/j.apenergy.2013.04.072 ↗
12. Novel low melting point quaternary eutectic system for solar thermal energy storage10.1016/j.apenergy.2012.09.001 ↗
13. Surface tension and cohesive energy density of molten salts10.1016/j.tca.2013.08.018 ↗
14. Survey of properties of key single and mixture halide salts for potential application as high temperature heat transfer fluids for concentrated solar thermal power systems10.3934/energy.2014.2.133 ↗
15. Preparation and thermal properties of quaternary mixed nitrate with low melting point10.1016/j.solmat.2014.03.056 ↗
16. Surface tension of molten metal halide salts10.1016/j.molliq.2014.09.052 ↗
17. Mixed metal carbonates/hydroxides for concentrating solar power analyzed with DSC and XRD10.1016/j.solmat.2015.04.006 ↗
18. Determination and evaluation of the thermophysical properties of an alkali carbonate eutectic molten salt10.1039/C5FD00236B ↗
19. Molten salts: volume 4, part 3, bromides and mixtures, iodides and mixtures - electrical conductance, density, viscosity, and surface tension data10.1063/1.555552 ↗
20. H. Sasaki, E. Tokizaki, K. Terashima, S. Kimura, Density measurement of molten silicon by an improved Archimedean method, Journal of Crystal Growth, 139, 1994, pp. 225–230, 10.1016/0022–0248(94)90170-8. 10.1016/0022–0248(94)90170-9017810.1016/0022-0248(94)90170-8 ↗