journal article·2016-12

Electronic structure and self-organization properties of low band gap polymers: The effect of the introduction of additional thiophene moieties

Milutin Ivanović, Umut Aygül, Ulf Dettinger, Aurélien Tournebize, Małgorzata Polek, David Batchelor, Stefan Mangold, Michael Forster, Ullrich Scherf, Heiko Peisert, Thomas Chassé

Publisher page

Abstract

Abstract An approach to improve the efficiency of donor-acceptor based bulk heterojunction (BHJ) organic solar cells is the use of low band gap (LBG) polymers as donor materials. The properties of these materials in BHJ solar cells are strongly influenced by their morphology and ability for self-organization in thin-films. We studied for two related polymer pairs the influence of the introduction of additional (hexyl-) thiophene moieties on both the electronic structure and ability for self-organization in thin films using Ultraviolet photoelectron spectroscopy (UPS) and Near-Edge X-Ray Absorption Fine Structure spectroscopy (NEXAFS). In addition, the influence of mixing with PCBM and post-processing annealing on the molecular orientation is investigated. We find that the introduction of additional (hexyl-) thiophene moieties in the polymer structure does not affect significantly the electronic structure of the polymers in thin films, but has a strong impact on their self-organization properties and consequently affects their behavior in devices.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (62)

Show source-provided references
1. Polymer–fullerene bulk-heterojunction solar cells10.1002/adma.200903697 ↗
2. Morphology of polymer/fullerene bulk heterojunction solar cells10.1039/B510618B ↗
3. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
4. Polymer-fullerene bulk-heterojunction solar cells10.1002/adma.200801283 ↗
5. Bulk heterojunction solar cells using thieno[3,4-c](pyrrole-4,6-dione and dithieno[3,2-b:2′,3′-d]silole copolymer with a power conversion efficiency of 7.3%10.1021/ja200314m ↗
6. Polymer–fullerene bulk heterojunction solar cells10.1088/0034-4885/73/9/096401 ↗
7. Bulk heterojunction solar cells: morphology and performance relationships10.1021/cr400353v ↗
8. Fluorination of copper phthalocyanines: electronic structure and interface properties10.1063/1.1577223 ↗
9. High photovoltaic performance of a low-bandgap polymer10.1002/adma.200600160 ↗
10. Low band gap polymers for organic photovoltaics10.1016/j.solmat.2007.01.015 ↗
11. C. Liu, K. Wang, X. Gong, A.J. Heeger, Low bandgap semiconducting polymers for polymeric photovoltaics, Chem. Soc. Rev., 2016, http://dx.doi.org/10.1039/C5CS00650C.10.1039/C5CS00650C ↗
12. Design rules for donors in bulk-heterojunction solar cells—towards 10% energy-conversion efficiency10.1002/adma.200501717 ↗
13. Low bandgap polymers for photon harvesting in bulk heterojunction solar cells10.1039/b306630d ↗
14. Molecular orientation in polymer films for organic solar cells studied by NEXAFS10.1021/jp205653n ↗
15. Molecular orientation in polymer/fullerene blend films and the influence of annealing10.1016/j.solmat.2014.05.017 ↗
16. The influence of molecular orientation on organic bulk heterojunction solar cells10.1038/nphoton.2014.55 ↗
17. Backbone orientation in semiconducting polymers10.1016/j.polymer.2014.12.066 ↗
18. “Solvent Annealing” effect in polymer solar cells based on poly(3-hexylthiophene) and methanofullerenes10.1002/adfm.200600624 ↗
19. Morphology characterization in organic and hybrid solar cells10.1039/c2ee22056c ↗
20. Molecular orientation dependent energy level alignment at organic−organic heterojunction interfaces10.1021/jp903139q ↗
21. Two-dimensional charge transport in self-organized, high-mobility conjugated polymers10.1038/44359 ↗
22. Enhanced mobility of poly(3-hexylthiophene) transistors by spin-coating from high-boiling-point solvents10.1021/cm049617w ↗
23. Soluble and processable regioregular poly(3–hexylthiophene) for thin film field-effect transistor applications with high mobility10.1063/1.117834 ↗
24. Self-orienting head-to-tail poly(3-alkylthiophenes): new insights on structure-property relationships in conducting polymers10.1021/ja00064a070 ↗
25. High performance weak donor–acceptor polymers in thin film transistors: effect of the acceptor on electronic properties, ambipolar conductivity, mobility, and thermal stability10.1021/ja205566w ↗
26. Soft X-ray characterisation of organic semiconductor films10.1039/C2TC00001F ↗
27. Orientation and electronic properties of phthalocyanines on polycrystalline substrates10.1002/pssb.200945051 ↗
28. Electronic structure, molecular orientation, charge transfer dynamics and solar cells performance in donor/acceptor copolymers and fullerene: Experimental and theoretical approaches10.1063/1.4870470 ↗
29. Application to surface structure analyses (Chapter 5)10.1016/S0926-4345(96)80006-X ↗
30. Comparative study of the modelling of the spectral background of photoelectron spectra with the Shirley and improved Tougaard methods10.1016/j.elspec.2013.01.020 ↗
31. Relaxation energies in XPS and XAES of solid sulfur compounds10.1016/0368-2048(94)02129-5 ↗
32. Energy level alignment and interfacial electronic structures at organic/metal and organic/organic interfaces10.1002/(SICI)1521-4095(199906)11:8<605::AID-ADMA605>3.0.CO;2-Q ↗
33. Energy-level alignment at organic/metal and organic/organic interfaces10.1002/adma.200802893 ↗
34. Energy level alignment in Au/pentacene/PTCDA trilayer stacks10.1016/j.cplett.2013.07.035 ↗
35. Charge equilibration and potential steps in organic semiconductor multilayers10.1016/j.orgel.2012.05.041 ↗
36. Trap-assisted recombination via integer charge transfer states in organic bulk heterojunction photovoltaics10.1002/adfm.201401513 ↗
37. Band-gap and correlation effects in the organic semiconductor Alq(3)10.1103/PhysRevB.65.033204 ↗
38. Probing the energy levels in hole-doped molecular semiconductors10.1039/C5MH00023H ↗
39. Interface fermi level pinning at contacts between PEDOT: PSS and molecular organic semiconductors10.1002/cphc.200600542 ↗
40. Sexithiophene films on ordered and disordered TiO2(1 1 0) surfaces: electronic, structural and morphological properties10.1016/j.susc.2006.09.020 ↗
41. Orientation-dependent ionization energies and interface dipoles in ordered molecular assemblies10.1038/nmat2119 ↗
42. Photoelectron spectroscopy and modeling of interface properties related to organic photovoltaic cells10.1016/j.elspec.2013.02.001 ↗
43. Energetics at doped conjugated polymer/electrode interfaces10.1002/admi.201400403 ↗
44. The interplay of electronic structure, molecular orientation and charge transport in organic semiconductors: Poly(thiophen)e) (and poly(bithiophen)e)10.1016/j.orgel.2013.08.022 ↗
45. Insight into the orientation of LBG polymer films by XANES experiment and calculation10.1016/j.eurpolymj.2016.04.005 ↗
46. A valence- and inner-shell electronic and photoelectron spectroscopic study of the frontier orbitals of 2,1,3-benzothiadiazole, C6H4SN2, 1,3,2,4-benzodithiadiazine, C6H4S2N2, and 1,3,5,2,4-benzotrithiadiazepine, C6H4S3N210.1016/0368-2048(91)85021-K ↗
47. Inner shell excitation of thiophene and thiolane: gas, solid, and monolayer states10.1063/1.451718 ↗
48. Photoabsorption and desorption studies on poly-3-hexylthiophene/multi-walled carbon nanotube composite films10.1016/j.susc.2009.01.002 ↗
49. Stöhr · 1992
50. Exciton diffusion length in narrow bandgap polymers10.1039/c2ee03466b ↗
51. Effect of molecular weight on the structure and crystallinity of poly(3-hexylthiophene)10.1021/ma0521349 ↗
52. Effect of molecular weight on morphology and photovoltaic properties in P3HT:PCBM solar cells10.1016/j.orgel.2015.02.017 ↗
53. Oriented thin films from soluble polythiophenes10.1002/pat.365 ↗
54. Model for the morphology of P3HT/PCBM organic photovoltaics from small-angle neutron scattering: rivers and streams10.1021/nn200744q ↗
55. Vertical stratification and interfacial structure in P3HT:PCBM organic solar cells10.1021/jp104695j ↗
56. Interfacial segregation in polymer/fullerene blend films for photovoltaic devices10.1021/ma100027b ↗
57. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
58. The influence of thermal annealing on the morphology and structural properties of a conjugated polymer in blends with an organic acceptor material10.1007/s10853-009-3425-8 ↗
59. Competition between fullerene aggregation and poly(3-hexylthiophene) crystallization upon annealing of bulk heterojunction solar cells10.1021/nn2010816 ↗
60. Effects of postproduction treatment on plastic solar cells10.1002/adfm.200390011 ↗
61. Improved photovoltaic properties of solar cells based on poly [9, 9′-dioctyl-fluorene-co-bithiophene] and a soluble fullerene by microwave annealing10.1007/s10853-009-3461-4 ↗
62. Annealing of P3HT:PCBM blend film—the effect on its optical properties10.1021/am4004232 ↗