journal article·2016-08

Influence of external contacting on electroluminescence and fill factor measurements

Hannes Höffler, Jonas Haunschild, Stefan Rein

Publisher page

Abstract

Abstract Electroluminescence imaging combined with photoluminescence imaging on solar cells allows extracting spatially resolved information on local solar cell quality. Numerous methods for the extraction of spatially resolved parameters have been introduced in the past. An important factor, which has mandatory influence on electroluminescence images, has not been discussed in detail yet. This factor is the influence of the external contacting scheme or erroneous contacting on the measurement results. In this work we discuss the influence of the external contacting scheme on the appearance of electroluminescence images and images of the spatially resolved series resistance which are calculated from electroluminescence images taken at different operating points. Furthermore we discuss the impact of erroneous contacting on fill factor measurements. We show that the impact of erroneous contacting on fill factor measurements becomes larger if busbar resistances become larger. The industrial trend towards thinner busbars with higher resistances hence motivates an electroluminescence based quality control for inline current voltage measurements of silicon solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Integrated Circuits and Semiconductor Failure Analysis · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. Spatially resolved series resistance of silicon solar cells obtained from luminescence imaging10.1063/1.2709630 ↗
2. B. Michl, M. Kasemann, J. Giesecke, M. Glatthaar, A. Schütt, J. Carstensen, H. Föll, S. Rein, W. Warta, H. Nagel, Application of Luminescence Imaging Based Series Resistance Measurement Methods in an Industrial Environment, 2008, pp. 1176–1181.
3. Spatially resolved determination of dark saturation current and series resistance of silicon solar cells10.1002/pssr.200903290 ↗
4. Photoluminescence image evaluation of solar cells based on implied voltage distribution10.1016/j.solmat.2014.05.040 ↗
5. Quantitative evaluation of electroluminescence images of solar cells10.1002/pssr.200903304 ↗
6. Comparison of DLIT- and PL-based local solar cell efficiency analysis10.1016/j.egypro.2013.07.243 ↗
7. Evaluation of luminescence images of solar cells for injection-level dependent lifetimes10.1016/j.solmat.2012.12.024 ↗
8. Surface Recombination Parameters of interdigitated-back-contact Silicon Solar Cells obtained by modeling Luminescence Images
9. Voltage calibration of luminescence images of silicon solar cells10.1063/1.4862400 ↗
10. Statistical Evaluation of a Luminscence-based Method for imaging the series resistance of solar cells10.1016/j.egypro.2012.07.060 ↗
11. Contacting interdigitated back-contact solar cells with four busbars for precise current–voltage measurements under standard testing conditions10.1109/JPHOTOV.2012.2195637 ↗
12. J. Hohl-Ebinger, D. Grote, B. Hund, A. Mette, W. Warta, Contacting bare solar cells for STC measurements, in: Proceedings of the 23rd European Photovoltaic Solar Energy Conference, 2008.
13. International Technology Roadmap for Photovoltaic: Revision 1.
14. S. Werner, E. Lohmüller, S. Maier, A. Kimmerle, A. Spribille, S. Wasmer, F. Clement, A. Wolf, Process optimization for the front side of p-type silicon solar cells, in: Proceedings of the 29th European PV Solar Energy Conference, 2014.