Laser doping through anodic aluminium oxide silicon solar cell
Source abstract
Abstract
Abstract This paper reports on the use of AAO layers as a source of p-type dopants for laser doping processes that forms localised p+ regions on Si surfaces. Sheet resistances as low as 2 Ω/sq were demonstrated when a laser was used to scribe through a region of AAO using a speed of 500 mm/s and power of 9 W. Unlike laser-doping through spin-coated polyboron sources, it was shown that laser doping through AAO layers can be performed without introducing any voids into the Si and form a local BSF ~5 µm into Si which is advantageous for PERL cell structure. This co-doping process was used to fabricate rear-passivated cells with efficiencies of up to 19.9%. However, although the heavily-doped local p + regions could reduce R s to values as low as 0.54 Ω cm 2 , there was a penalty in terms of a high ideality factor in the V mp – V oc voltage range which limited FF s to ~76%.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Integrated Circuits and Semiconductor Failure Analysis · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. A wafer-based monocrystalline silicon photovoltaics road map: utilizing known technology improvement opportunities for further reductions in manufacturing costs10.1016/j.solmat.2013.01.030 ↗
2. ITRPV, International Technology Roadmap for Photovoltaic (ITRPV) 2013 Results in, 2014.
3. Deep junction laser doping for contacting buried layers in silicon solar cells10.1016/j.solmat.2013.02.011 ↗
4. Advanced PERC and PERL production cells with 20.3% record efficiency for standard commercial p-type silicon wafers10.1002/pip.2178 ↗
5. S.W. Glunz, n-Type silicon-enabling efficiencies >20% in industrial production, In: Proceedings of the IEEE Photovoltaic Specialists Conference, Honolulu, Hawaii, 2010.10.1109/PVSC.2010.5614203 ↗
6. B.H.A. Sugianto, X. Bai, Z. Wang, P. Han, H. Lu, L. Mai, S.R. Wenham, Z. Sh, Over 20%-efficient laser-doped passivated rear contact solar cells on industrial-sized commercial grade p-type CZ wafers, In: Proceedings of the 27th European Photovoltaic Solar Energy Conference and Exhibition, Frankfurt, 2012, pp. 700–705.
7. Industrial high performance crystalline silicon solar cells and modules based on rear surface passivation technology10.1016/j.solmat.2013.06.025 ↗
8. Power-loss analysis of advanced PERC cells reaching 20.5% energy conversion efficiency10.1016/j.egypro.2013.07.305 ↗
9. B. Tjahjono, M.J. Yang, V. Wu, J. Ting, J. Shen, O. Tan, T. Sziptalak, B. Liu, H.-P. Sperlich, T. Hengst, B. Beilby, K.-C. Hsu, Optimizing CELCO cell technology in one year of mass production, In: Proceedings of the 28th European Photovoltaic Solar Energy Conference and Exhibition, Pairs, 2013.
10. E.U. Davanzo, Aluminum–Silicon Contact Formation Through Narrow Dielectric Openings Application to Tindustrial High Efficiency Rear Passivated Solar Cells.
11. Laser doping using phosphorus-doped silicon nitrides10.1016/j.egypro.2011.06.204 ↗
12. Industrially feasible rear passivation and contacting scheme for high-efficiency n-type solar cells yielding a Voc of 700mV10.1109/TED.2010.2051194 ↗
13. p-Type c-Si solar cells based on rear side laser processing of Al2O3/SiCx stacks10.1016/j.solmat.2012.05.012 ↗
14. Laser processing of Al2O3/a-SiCx:H stacks: a feasible solution for the rear surface of high-efficiency p-type c-Si solar cells10.1002/pip.2207 ↗
15. D. Chen, Z. Liang, Y. Yang, H. Shen, Y. Liu, Structure simulation of screen printed local back surface field for rear passivated silicon solar cells, in: Proceedings of the 38th IEEE Photovoltaic Specialists Conference (PVSC), 2012, pp. 001018–001022, 10.1109/PVSC.2012.6317775.10.1109/PVSC.2012.6317775 ↗
16. Silicon diffusion in aluminum for rear passivated solar cells
17. Analysis of local Al-doped back surface fields for high efficiency screen-printed solar cells10.1016/j.egypro.2011.06.143 ↗
18. J. Cui, J. Colwell, Z. Li, A. Lennon, Localised back surface field formation via different dielectric patterning approaches, In: Proceedings of the 50th Annual Conference Australian Solar Energy Society, Melbourne, Australia, 2012.
19. Anodic aluminum oxide passivation for silicon solar cells10.1109/JPHOTOV.2012.2214377 ↗
20. Electronic properties of electrolyte/anodic alumina junction during porous anodizing10.1016/j.apsusc.2006.10.038 ↗
21. Porous anodic alumina: fabrication, characterization and applications10.1016/S0040-6090(96)09440-0 ↗
22. P.H.D. Lu, Anodic Aluminium Oxide for Silicon Solar Cell Passivation and Metallisation, University of New South Wales.
23. A. Sugianto, B. Hallam, B. X, P. Han, H. Lu, L. Mai, S. Wenham, Z. Shi, Over 20%-efficient laser-doped passivated rear contact solar cells on industrial-sized commercial grade p-type CZ wafers, In: Proceedings of the 27th European Photovoltaic Solar Energy Conference, Frankfurt, 2012, pp. 700–705.
24. Incorporation of deep laser doping to form the rear localized back surface field in high efficiency solar cells10.1016/j.solmat.2014.06.037 ↗
25. Laser-doped metal-plated bifacial silicon solar cells10.1016/j.solmat.2014.06.020 ↗
26. Use of inductively coupled plasma measurements to characterise light induced plating for silicon solar cells10.1016/j.solmat.2011.10.006 ↗
27. Measurement of sheet resistivities with the four-point probe10.1002/j.1538-7305.1958.tb03883.x ↗
28. Review solar-grade silicon10.1007/BF01203469 ↗
29. M.F. Ametowobla, Characterisation of a Laser Doping Process for Crystalline Silicon Solar Cells, Stuttgart University.
30. B. Xiao, High efficiency laser doping silicon solar cell with aluminium oxide rear side passivation, University of New South Wales.
31. A. Sugianto, Development of Commerical High-efficiency Silicon Solar Cells using Selective Emitters and Passivated Rear Contacts, University of New South Walse.
32. B. Hallam, High Efficiency Laser-doped Silicon Solar Cells with Advanced Hydrogenation, Univeristy of New South Wales.
33. P.H.D. Lu, D. Lin, A. Lennon, S. Wenham, Formation of heavily-doped p+ regions by laser-doping through anodic aluminium oxide, In: Proceedings of the 29th European PV Solar Energy Coference and Exhibition Amsterdam, The Netherlands, 2014.
34. Self-patterned localized metal contacts for silicon solar cells10.1557/jmr.2013.204 ↗
35. K. McIntosh, M. Abbott, S. Baker-Finch, Equivalent Circuit, In: P. LightHouse (Ed.) Cells-device, 2014.
36. Series resistance characterization of industrial silicon solar cells with screen-printed contacts using hotmelt paste10.1002/pip.755 ↗
37. A review and comparison of different methods to determine the series resistance of solar cells10.1016/j.solmat.2007.05.026 ↗
38. Series resistance analysis of passivated emitter rear contact cells patterned using inkjet printing10.1155/2012/965418 ↗
39. Effect of electroless nickel on the series resistance of high-efficiency inkjet printed passivated emitter rear contacted solar cells10.1016/j.solmat.2010.06.035 ↗
40. Green · 1998
41. Reduced fill factors in multicrystalline silicon solar cells due to injection-level dependent bulk recombination lifetimes10.1002/1099-159X(200007/08)8:4<363::AID-PIP328>3.0.CO;2-Y ↗
42. Electronic properties of light-induced recombination centers in boron-doped Czochralski silicon10.1063/1.371186 ↗
43. Electronic properties of the metastable defect in boron-doped Czochralski silicon: unambiguous determination by advanced lifetime spectroscopy10.1063/1.1544431 ↗
44. Electronically activated boron–oxygen-related recombination centers in crystalline silicon10.1063/1.2140584 ↗
45. X. Wang, M. Juhl, M. Abbott, Z. Hameiri, Y. Yao, A. Lennon, Use of QSSPC and QSSPL to monitor recombination process in p-type silicon solar cells, In: Proceedings of the 4th International Conference on SIliocn Photovoltaics Netherlands, 2014, pp. 169–178.10.1016/j.egypro.2014.08.110 ↗
46. K.R. McIntosh, Lumps, Humps and Bumps: Three Detrimental Effects in the Current–Voltage Curve of Silicon Solar Cells, University of New South Wales.
47. Impact of localized regions with very high series resistances on cell performance10.1002/pip.1163 ↗
48. C. Chan, Novel Laser Doping Technology for Silicon Solar Cell, University of New South Wales.
49. Assessing the performance of surface passivation using low-intensity photoluminescence characterization techniques, photovoltaics10.1109/JPHOTOV.2013.2282739 ↗
50. Effect of rapid thermal annealing on recombination centres in boron-doped Czochralski-grown silicon10.1063/1.4863674 ↗
51. Advanced loss analysis method for silicon wafer solar cells10.1016/j.egypro.2011.06.131 ↗
52. J. Cui, X. Wang, D. Lin, P.H.D. Lu, A. Lennon, Anodic aluminium oxide rear passivated laser-doped selective-emitter solar cells, In: Proceedings of the 40th IEEE Photovoltaics Specialist Conference Denver, USA, 2014, pp. 586–589.10.1109/PVSC.2014.6924989 ↗