Influence of Cl and H2O in spray-ILGAR® solutions on the voltage gain of Cu(In,Ga)(S,Se)2 solar cells with In2S3 buffer
Source abstract
Abstract
Abstract In2S3 thin layers can be prepared by Spray-ILGAR® (Ion Layer Gas Reaction) from indium trichloride or from indium triacetylacetonate solutions. In the first case, the film contains a controllable amount of Cl. The concentration of H2O or Cl was varied systematically in the precursor solutions that were used for the deposition of In2S3 buffer layers on commercially available Cu(Ga,In)(S,Se)2 absorbers. The layers were characterized by ultraviolet photo electron spectroscopy, optical spectroscopy, modulated surface photovoltage spectroscopy and X-ray photoelectron spectroscopy, combined with a sequential etching procedure. The latter allowed to estimate an element-specific depth profile. Experimental findings were correlated with the performance of the corresponding solar cells. The presence of H2O or Cl in the precursor solutions has a strong influence on the diffusion of Cu+ and Na+ cations from the absorber into the buffer layer. The open circuit voltage of solar cells with In2S3 buffer layers prepared from Cl-free, H2O-containing precursor solutions was higher by up to 100 mV than those from Cl-containing, but H2O-free solutions. For this reason, the average solar energy conversion efficiency of cells of the first buffer type was higher (14.7%) than for solar cells of the second type (12.1%).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · solar cell performance optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Solar cell efficiency tables (version 43)10.1002/pip.2452 ↗
2. Buffer layers and transparent conducting oxides for chalcopyrite Cu(In,Ga)(S,Se)2 based thin film photovoltaics: present status and current developments10.1002/pip.955 ↗
3. Indium sulfide thin films deposited by the spray ion layer gas reaction technique
4. ILGAR In2S3 buffer layers for Cd-free Cu(In,Ga)(S,Se)2 solar cells with certified efficiencies above 16%10.1002/pip.2268 ↗
5. The spray-ILGAR® (ion layer gas reaction) method for the deposition of thin semiconductor layers: Process and applications for thin film solar cells10.1016/j.solmat.2010.12.019 ↗
6. F.H.V. Probst, R.T.B. Walther, B.N.G. Batereau-Neumann, T.L.A. Windeck, A. Gerlach, High performance CIS solar modules: status of production and development at Johanna solar technology, in EU PVSEC Proceedings, Hamburg, Germany, 2009, 2455–2459.
7. M. Pomaska, “Einfluss der Indium-haltigen Ausgangslösungen auf die ILGAR-In2S3-Pufferschichten und die resultierenden Cu(In,Ga)(S,Se)2-Solarzellen,” Master Thesis, Freie Universiät Berlin, Berlin, 2013.
8. Surface photovoltage spectroscopy on Cu(In,Ga)(S,Se)2/ZnS-nanodot/In2S3 systems
9. The crystal structure of β-In 2S 310.1107/S0365110X65004735 ↗
10. Paul Pistor, “Formation and electronic properties of In2S3 / Cu(In,Ga)Se2 junctions and related thin film solar cells,” Ph.D., Freie Universiät Berlin, Berlin, 2009.
11. Y.F. Oana Cojocaru-Mirédin, R. S.-A. Aleksander Kostka, N.K. Andreas Beyer, C.-H. F. Kerstin Volz, Dierk Raabe, Interfaces engineering and characterization at the atomicscale of pure and mixed ILGAR buffer layers in chalcopyrite thin film solar cells, Prog. Photovolt. (accepted for publication).
12. Cu in In2S3: interdiffusion phenomena analysed by high kinetic energy X-ray photoelectron spectroscopy10.1002/pssa.200881162 ↗
13. Copper diffusion in thin In2S3 layers investigated by Rutherford backscattering spectroscopy10.1016/j.tsf.2012.07.042 ↗
14. Surface photovoltage spectroscopy of semiconductor structures: at the crossroads of physics, chemistry and electrical engineering10.1002/sia.1132 ↗
15. Susanna Harndt, “Durch Sprühdeposition hergestellte Komponenten für Dünnschichtsolarzellen,” Diploma, Hochschule für Technik und Wirtschaft Berlin, Berlin, 2010.
16. Spray-ILGAR indium sulfide buffers for Cu(In,Ga)(S,Se)2 solar cells10.1002/pip.655 ↗
17. Germanium-Gallium Arsenide Heterojunctions [Letter to the Editor]10.1147/rd.43.0283 ↗
18. Efficiency limitations for wide-band-gap chalcopyrite solar cells10.1016/j.tsf.2004.11.018 ↗
19. Characterisation and modelling of chalcopyrite solar cells10.1016/S0040-6090(00)01736-3 ↗