Accelerated test on electrochromic switchable mirror based on magnesium alloy thin film in simulated environment of various relative humidities
Source abstract
Abstract
Abstract An electrochromic switchable mirror can be switched between reflective and transparent states by applying voltage. This device can potentially be applied in new energy-saving windows because its reflective state can effectively control incoming solar radiation. We previously evaluated the effects of environmental factors such as temperature and humidity on the optical switching properties of the device using a thermostat/humidistat bath to realize its practical applications. In this work, we focused on the effect of relative humidity in the atmosphere on the properties of the device. When the device was stored at 50 °C and 80% relative humidity (RH) for 15 days, its surface became much rougher ( R a =23.2 nm) as a result of the degradation of the Mg 4 Ni thin film on the surface. The degraded device showed no optical switching properties. On the other hand, when the device was stored at 50 °C and 30% RH for 15 days, its surface was barely degraded and the device showed clear optical switching properties. These results suggest that not high temperature but rather high relative humidity in the atmosphere strongly affect the properties of the device, resulting in surface degradation. A protective coating layer using a fluorocarbon polymer was also developed to prevent the degradation of the device in the environment.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Transition Metal Oxide Nanomaterials · Advanced Memory and Neural Computing · Gas Sensing Nanomaterials and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Lampert · Sol. Energy Mater. Sol. Cells · 1998 · 52 · 20710.1016/S0927-0248(97)00279-1 ↗
2. Visual and energy performance of switchable windows with antireflection coatings10.1016/j.solener.2010.04.016 ↗
3. Switchable windows with tungsten oxide10.1016/j.vacuum.2007.10.020 ↗
4. Yttrium and lanthanum hydride films with switchable optical properties10.1038/380231a0 ↗
5. Switchable mirrors based on nickel–magnesium films10.1063/1.1371959 ↗
6. Metal hydride switchable mirrors: factors influencing dynamic range and stability10.1016/j.solmat.2005.02.015 ↗
7. Optical switching of Mg-rich Mg–Ni alloy thin films10.1063/1.1530378 ↗
8. Aluminum buffer layer for high durability of all-solid-state switchable mirror based on magnesium–nickel thin film10.1063/1.2761842 ↗
9. Accelerated degradation studies on electrochromic switchable mirror glass based on magnesium–nickel thin film in simulated environment10.1016/j.solmat.2010.05.034 ↗
10. Degradation studies of electrochromic all-solid-state switchable mirror glass under various constant temperature and relative humidity conditions10.1016/j.solmat.2010.08.027 ↗
11. Tantalum oxide thin film prepared by reactive dc magnetron sputtering using hydrogen-containing gas to fabricate all-solid-state switchable mirror glass10.1149/1.3281168 ↗
12. X-ray excited Auger and photoelectron spectra of magnesium, some alloys of magnesium and its oxide10.1088/0305-4608/5/2/020 ↗
13. Hydrogen in magnesium alloys and magnesium interfaces: preparation, electronic properties and interdiffusion10.1016/0022-5088(91)90207-K ↗
14. Use of an Auger parameter for characterizing the Mg chemical state in different materials10.1016/j.surfcoat.2003.10.062 ↗
15. XPS depth profile analysis of non-stoichiometric NiO films10.1002/sia.1640 ↗
16. Surface coating of electrochromic switchable mirror glass based on Mg–Ni thin film for high durability in the environment10.1143/APEX.3.042201 ↗