Progress in the metallisation of n-type multicrystalline silicon solar cells
Source abstract
Abstract
Abstract A study on the optimisation of front contacts of n-type multicrystalline silicon solar cells is presented. In this study the same cell processing was applied to two types of wafers: electronic grade (EG-Si) and metallurgic grade (MG-Si) silicon. The contact firing temperature was optimised, by measuring the contact resistivity of the front and back contacts for different firing temperatures. The front contacts were improved by deposing silver using an electrochemical process. The solar cells were characterised before and after the silver deposition. For all cells processed the line resistance was reduced by over 90% after the silver deposition. After the contact improvement, EG-Si cells showed an absolute efficiency improvement of 2.6%, but MG-Si cells suffered a reduction on the cell efficiency, an effect related to parasitic shunting existent in these cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Recombination activity of interstitial iron and other transition metal point defects in p- and n-type crystalline silicon10.1063/1.1812833 ↗
2. J. Schmidt, A.G. Aberle, R. Hezel, Investigation of carrier lifetime instabilities in CZ-grown silicon, in: Proceedings of the 26th IEEE PVSC, 1997, pp. 13–18.10.1109/PVSC.1997.653914 ↗
3. Nitric acid pretreatment for the passivation of boron emitters for n-type base silicon solar cells10.1063/1.2870202 ↗
4. High efficiency n-type Si solar cells on Al2O3-passivated boron emitters10.1063/1.2945287 ↗
5. K.R. McIntosh, The choice of silicon wafer for the production of low-cost rear-contact solar cells, in: Proceedings of the third World Conference on Photovoltaic Energy Conversion 2003, pp. 971–974.
6. Obtaining a higher Voc in HIT cells10.1002/pip.646 ↗
7. C. Oliver, B. Semmache, Y. Cuminal, A. Foucaran, M. Gauthier, Y. Pellegrin, Implementation of boron emitters using BCL3 diffusion process for industrial silicon solar cells fabrication, in: Proceedings of the 25th EPVSEC, 2010, pp. 1930–1933.
8. A. Cojocaru, S. Quoizola, E. Hernandez, F. Massines, L. Thomas, Properties of silicon carbide nitride layers deposited with organosilicon precursor on silicon solar cells, in: Proceedings of the 25th EPVSEC, 2010, pp. 2101–2106.
9. A. Mette, New Concepts for Front Side Metallization of Industrial Silicon Solar Cells, Thesis, Albert-Ludwigs-Universität Freiburg im Breisgau, FhG ISE, Freiburg, 2007.
10. A. Richter, M. Hörteis, J. Benick, M. Hermle, S.W. Glunz, Seed layer printed contact formation for highly doped boron emitters of n-type silicon solar cells with front side junction, in: Proceedings of the Second Workshop on Metallization, 2010, pp. 26–31.
11. Crystalline and thin-film silicon solar cells: state of the art and future potential10.1016/S0038-092X(03)00187-7 ↗
12. A. Mette, C. Schetter, D. Wissen, S. Lust, S.W. Glunz, G. Willeke, Increasing the efficiency of screen-printed silicon solar cells by light-induced silver plating, in: Proceedings of the Fourth World Conference on Photovoltaic Energy Conversion, 2006, pp. 1056–1059.10.1109/WCPEC.2006.279322 ↗
13. Technisol Technical Datasheet Ag 0239, Rev. 060 (2010).
14. Models for contacts to planar devices10.1016/0038-1101(72)90048-2 ↗
15. Screen metallization of boron emitters10.1002/pip.933 ↗
16. Goetzberger · 1998