journal article·2011-01

Fabrication of microcrystalline silicon solar cells on a SnO2 coated substrate using seed layer insertion

Jong-San Im, Sang Il Park, Jin-Wan Jeon, Koeng Su Lim

Publisher page

Abstract

Abstract We fabricated hydrogenated microcrystalline silicon (μc-Si:H) solar cells on SnO 2 coated glass using a seed layer insertion technique. Since rich hydrogen atoms from the μc-Si:H deposition process degrade the SnO 2 layer, we applied p-type hydrogenated amorphous silicon (p-a-Si:H) as a window layer. To grow the μc-Si:H layer on the p-a-Si:H window layer, we developed a seed layer insertion method. We inserted the seed layer between the p-a-Si:H layer and intrinsic bulk μc-Si:H. This seed layer consists of a thin hydrogen diluted silicon buffer layer and a naturally hydrogen profiled layer. We compared the characteristics of solar cells with and without the seed layer. When the seed layer was not applied, the fabricated cell showed the characteristics of a-Si:H solar cell whose spectral response was in a range of 400–800 nm. Using the seed layer, we achieved a μc-Si:H solar cell with performance of V oc =0.535 V, J sc =16.0 mA/cm 2 , FF=0.667, and conversion efficiency=5.7% without any back reflector. The spectral response was in the range of 400–1100 nm. Also, the fabricated device has little substrate dependence, because a-Si:H has weaker substrate selectivity than μc-Si:H.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thin-Film Transistor Technologies · Silicon Nanostructures and Photoluminescence · Silicon and Solar Cell Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (10)

Show source-provided references
1. The degradation of fluorine doped tin oxide films in a hydrogen plasma10.1116/1.575565 ↗
2. In situ investigation of the optoelectronic properties of transparent conducting oxide/amorphous silicon interfaces10.1063/1.101511 ↗
3. Substrate selectivity in the formation of microcrystalline silicon: mechanisms and technological consequences10.1063/1.113803 ↗
4. Etching and passivation effects on boron-doped amorphous silicon carbide p layer of amorphous silicon solar cell by hydrogen treatment using a mercury-sensitized photochemical vapor deposition method10.1063/1.119418 ↗
5. Device grade microcrystalline silicon owing to reduced oxygen contamination10.1063/1.117440 ↗
6. Oxygen and nitrogen impurities in microcrystalline silicon deposited under optimized conditions: Influence on material properties and solar cell performance
7. Material and solar cell research in microcrystalline silicon10.1016/S0927-0248(02)00448-8 ↗
8. Highly efficient microcrystalline silicon solar cells deposited from a pure SiH4 flow10.1063/1.2152115 ↗
9. Microcrystalline silicon solar cells deposited at high rates10.1063/1.1927689 ↗
10. Understanding light trapping by light scattering textured back electrodes in thin film n-i-p-type silicon solar cells10.1063/1.2751117 ↗