Accelerated reliability tests of n+ and p+ poly-Si passivated contacts
Source abstract
Abstract
We report on the stability of encapsulated, low-pressure chemical vapor-deposited phosphorus ( n + poly-Si) doped and boron ( p + poly-Si) doped poly-Si/SiO x passivated contacts by exposing the samples to three different accelerated tests: damp heat test, thermal cycling and ultraviolet exposure, adhering closely to the IEC 61215 standard. Outdoor testing was also performed by exposing the samples in the outdoor testing field at the National Renewable Energy Laboratory, and preliminary data accumulated for 1000 h from February to April of 2021 is reported. We studied non-metallized, thermally-metallized, and screen-printed n + and p + poly-Si by monitoring the effective minority carrier lifetime at the implied maximum power point using a Sinton lifetime tester, and recorded photoluminescence images before and after the exposure. The samples were found to be stable under all test conditions, which is encouraging for incorporation of these contacts in next-generation industrial silicon solar cells.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Integrated Circuits and Semiconductor Failure Analysis · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. TOPCon – technology options for cost efficient industrial manufacturing10.1016/j.solmat.2021.111100 ↗
2. Newswire · 2021
3. Osborne · 2021
4. Chen · 2019 · 6
5. 24.58% total area efficiency of screen-printed, large area industrial silicon solar cells with the tunnel oxide passivated contacts (i-TOPCon) design10.1016/j.solmat.2019.110258 ↗
6. Mass production of industrial tunnel oxide passivated contacts (i‐TOPCon) silicon solar cells with average efficiency over 23% and modules over 345 W10.1002/pip.3180 ↗
7. Efficient carrier-selective p- and n-contacts for Si solar cells10.1016/j.solmat.2014.05.039 ↗
8. Tunnel oxide passivated contacts formed by ion implantation for applications in silicon solar cells10.1063/1.4936223 ↗
9. The application of poly-Si/SiOx contacts as passivated top/rear contacts in Si solar cells10.1016/j.solmat.2016.09.015 ↗
10. Analysis of silicon solar cells with poly-Si/SiOx carrier-selective base and emitter contacts10.1109/JPHOTOV.2017.2775142 ↗
11. Crystalline silicon solar cells with coannealed electron- and hole-selective SiC x passivating contacts10.1109/JPHOTOV.2018.2866189 ↗
12. Building blocks for industrial, screen-printed double-side contacted POLO cells with highly transparent ZnO:Al layers
13. Phosphorous-doped silicon carbide as front-side full-area passivating contact for double-side contacted c-Si solar cells10.1109/JPHOTOV.2018.2886234 ↗
14. Ultra‐thin poly‐Si layers: passivation quality, utilization of charge carriers generated in the poly‐Si and application on screen‐printed double‐side contacted polycrystalline Si on oxide cells10.1002/solr.202000177 ↗
15. Implantation‐based passivating contacts for crystalline silicon front/rear contacted solar cells10.1002/pip.3250 ↗
16. Role of silicon surface, polished ⟨100⟩ and ⟨111⟩ or textured, on the efficiency of double‐sided TOPCon solar cells10.1002/pip.3304 ↗
17. Double-sided TOPCon solar cells on textured wafer with ALD SiOx layer10.1016/j.solmat.2019.110357 ↗
18. Design, optimization, and in-depth understanding of front and rear junction double-side passivated contacts solar cells10.1109/JPHOTOV.2021.3086461 ↗
19. Inkjet printing of phosphorus dopant sources for doping poly-silicon in solar cells with passivating contacts10.1016/j.solmat.2020.110926 ↗
20. Process development and integration of double-side Poly-Si passivated solar cells with printed contacts via LPCVD and ex-situ tube diffusion10.1016/j.solmat.2021.111249 ↗
21. Solution-doped polysilicon passivating contacts for silicon solar cells10.1021/acsami.0c22127 ↗
22. Design rules for high-efficiency both-sides-contacted silicon solar cells with balanced charge carrier transport and recombination losses10.1038/s41560-021-00805-w ↗
23. Reactive ion etched, self-aligned, selective area poly-Si/SiO2 passivated contacts10.1016/j.solmat.2020.110621 ↗
24. The irresistible charm OF a simple current flow pattern
25. Degradation and regeneration of n + -doped poly-Si surface passivation on p -type and n -type Cz-Si under illumination and dark annealing10.1109/JPHOTOV.2020.2964987 ↗
26. Long-term stability study of the passivation quality of polysilicon-based passivation layers for silicon solar cells10.1016/j.solmat.2020.110691 ↗
27. Outdoor performance of a tandem InGaP/Si photovoltaic luminescent solar concentrator10.1016/j.solmat.2020.110945 ↗
28. Theingi · 2019 · 0747
29. Influence of light soaking on silicon heterojunction solar cells with various architectures10.1109/JPHOTOV.2021.3065537 ↗
30. UV-induced degradation of high-efficiency solar cells with different architectures
31. Effects of the irradiance intensity during UV accelerated aging test on unencapsulated silicon solar cells10.1016/j.solener.2017.08.044 ↗
32. Impact of surface passivation on UV stability of bifacial mc-Si PERC solar modules
33. UV radiation hardness of photovoltaic modules featuring crystalline Si solar cells with AlO x/p + -type Si and SiN y/n + -type Si interfaces: UV radiation hardness of photovoltaic modules10.1002/pssr.201700178 ↗
34. Reducing UV induced degradation losses of solar modules with c-Si solar cells featuring dielectric passivation layers
35. UV-stable surface passivation for crystalline silicon cells in solar modules with UV light transmitting encapsulation materials
36. Liu · 2020 · 16
37. Damp heat induced degradation of silicon heterojunction solar cells with Cu-plated contacts10.1109/JPHOTOV.2019.2941693 ↗
38. Effects of SiOx barrier layer prepared by plasma-enhanced chemical vapor deposition on improvement of long-term reliability and production cost for Cu-plated amorphous Si/crystalline Si heterojunction solar cells10.1016/j.solmat.2016.12.029 ↗
39. Accounting for the dependence of coil sensitivity on sample thickness and lift-off in inductively coupled photoconductance measurements10.1109/JPHOTOV.2019.2942484 ↗
40. Damp‐heat degradation and repair of oxide‐passivated silicon
41. Damp and dry heat degradation of thermal oxide passivation of p+ silicon
42. Polycrystalline silicon passivated tunneling contacts for high efficiency silicon solar cells10.1557/jmr.2016.77 ↗
43. Hydrogen passivation of poly-Si/SiO x contacts for Si solar cells using Al 2 O 3 studied with deuterium10.1063/1.5031118 ↗
44. Hydrogenation mechanisms of poly‐Si/SOx passivating contacts by different capping layers10.1002/solr.201900476 ↗
45. On the hydrogenation of Poly-Si passivating contacts by Al2O3 and SiN thin films10.1016/j.solmat.2020.110592 ↗
46. Passivation of aluminium-n + silicon contacts for solar cells by ultrathin Al 2 O 3 and SiO 2 dielectric layers10.1002/pssr.201308115 ↗
47. Surface passivation of phosphorus-diffused n+-type emitters by plasma-assisted atomic-layer deposited Al2O310.1002/pssr.201105445 ↗
48. Hydrogen induced passivation of Si interfaces by Al2O3 films and SiO2/Al2O3 stacks10.1063/1.3497014 ↗
49. Contactless determination of current–voltage characteristics and minority‐carrier lifetimes in semiconductors from quasi‐steady‐state photoconductance data10.1063/1.117723 ↗
50. Studying dopant diffusion from Poly-Si passivating contacts
51. Passivating contacts and tandem concepts: approaches for the highest silicon-based solar cell efficiencies10.1063/1.5139202 ↗
52. On the recombination behavior of p + -type polysilicon on oxide junctions deposited by different methods on textured and planar surfaces: on the recombination behavior of p + -type polysilicon on oxide junctions10.1002/pssa.201700058 ↗
53. Stodolny · 2018 · 24
54. Photoluminescence: a surprisingly sensitive lifetime technique10.1109/PVSC.2005.1488277 ↗