Improvement of Ga distribution with Sb incorporation for two-step low-temperature processing of CIGSe thin film solar cells
Source abstract
Abstract
Abstract In this study, the application of Sb incorporation for low-temperature (≤ 450 °C) processing of Cu(In,Ga)Se2 (CIGSe) solar cells is explored. At low reaction temperature, most Ga remains at the back of the film adjacent to the Mo back contact. We observed that the incorporated Sb enhanced grain size and improved device performance compared with similarly processed CIGSe films made without Sb. From the energy-dispersive spectroscopy analysis and secondary ion mass spectrometry results, it was determined that elemental Ga accumulation at the back of the reacted film after the two-step selenization process was significantly alleviated owing to Sb incorporation. Significant Sb-induced grain size enhancement was confirmed using cross-sectional scanning electron microscopy. The electronic and optical properties of the Sb incorporated CIGSe films were examined with admittance spectroscopy and fluorescence lifetime imaging techniques.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · nanoparticles nucleation surface interactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Scaling-up of CIS technology for thin-film solar modules10.1002/(SICI)1099-159X(199611/12)4:6<425::AID-PIP153>3.0.CO;2-Y ↗
2. New world record efficiency for Cu(In,Ga)Se2 thin-film solar cells beyond 20%10.1002/pip.1078 ↗
3. Progress toward 20% efficiency in Cu(In,Ga)Se2 polycrystalline thin-film solar cells10.1002/(SICI)1099-159X(199907/08)7:4<311::AID-PIP274>3.0.CO;2-G ↗
4. Solar cell efficiency tables (version 52)10.1002/pip.3040 ↗
5. Potassium-induced surface modification of Cu(In,Ga)Se2 thin films for high-efficiency solar cells10.1038/nmat3789 ↗
6. Progress in thin film CIGS photovoltaics – research and development, manufacturing, and applications10.1002/pip.2811 ↗
7. Review of progress toward 20% efficiency flexible CIGS solar cells and manufacturing issues of solar modules10.1109/JPHOTOV.2012.2226869 ↗
8. Inline Cu(In,Ga)Se2Co-evaporation for high-efficiency solar cells and modules10.1109/JPHOTOV.2013.2256232 ↗
9. Cu(In,Ga)Se2 solar cells on low cost mild steel substrates10.1016/j.solener.2017.12.057 ↗
10. Investigation of Al2O3 diffusion barrier layer fabricated by atomic layer deposition for flexible Cu(In,Ga)Se2 solar cells10.1016/j.renene.2012.12.024 ↗
11. Key near-term R&D issues for continuous improvement in CIS-based thin-film PV modules10.1016/j.solmat.2008.11.063 ↗
12. Phases, morphology, and diffusion in CuInxGa1−xSe2 thin films10.1063/1.366122 ↗
13. Three-step H2Se/Ar/H2S reaction of Cu-In-Ga precursors for controlled composition and adhesion of Cu(In,Ga)(Se,S)2 thin films10.1063/1.4704390 ↗
14. Insight into the mechanism of Sb promoted Cu(In,Ga)Se2 formation10.1016/j.jssc.2013.06.012 ↗
15. Influences of Sb on the growth and properties of CulnSe2 thin films10.1143/JJAP.34.1109 ↗
16. Optimization of CIGS-based PV device through antimony doping10.1021/cm903428f ↗
17. Antimony assisted low-temperature processing of CuIn1−xGaxSe2−ySy solar cells10.1016/j.tsf.2010.08.135 ↗
18. Single-step sulfo-selenization method for achieving low open circuit voltage deficit with band gap front-graded Cu2ZnSn(S,Se)4 thin films10.1016/j.solmat.2016.11.034 ↗
19. Performance enhancement in Sb doped Cu(InGa)Se2 thin film solar cell by e-beam evaporation10.1016/j.apsusc.2017.10.025 ↗
20. Effect of zinc addition on properties of cadmium sulfide layer and performance of Cu(In,Ga)Se2 solar cell10.1016/j.tsf.2012.11.077 ↗
21. Effects of heavy alkali elements in Cu(In,Ga)Se2 solar cells with efficiencies up to 22.6%10.1002/pssr.201600199 ↗
22. Growth and characterization of co-evaporated Cu2ZnSnSe4 thin films for photovoltaic applications10.1088/0022-3727/41/20/205305 ↗
23. Grain size and texture of Cu2ZnSnS4 thin films synthesized by cosputtering binary sulfides and annealing: effects of processing conditions and sodium10.1007/s11664-011-1729-3 ↗
24. Distinction between bulk and interface states in CuInSe2/CdS/ZnO by space charge spectroscopy10.1063/1.366686 ↗
25. L.M. Mansfield, D. Kuciauskas, P. Dippo, J.V. Li, K. Bowers, B. To, C. DeHart, K. Ramanathan, In Optoelectronic investigation of Sb-doped Cu(In,Ga)Se2, in: Proceedings of 42nd Photovoltaic Specialist Conference (PVSC), 14-19 June 2015; 2015; pp 1-4.10.1109/PVSC.2015.7356156 ↗
26. The role of sulfur in solution-processed Cu2ZnSn(S,Se)4 and its effect on defect properties10.1002/adfm.201201732 ↗
27. Nonequilibrium steady-state statistics and associated effects for insulators and semiconductors containing an arbitrary distribution of traps10.1103/PhysRevB.4.502 ↗
28. Comparison of chalcopyrite and kesterite thin-film solar cells10.1016/j.jiec.2016.09.005 ↗
29. Effects of Ga addition to CuInSe2 on its electronic, structural, and defect properties10.1063/1.121548 ↗
30. Defect properties of CuInSe2 and CuGaSe210.1016/j.jpcs.2005.10.003 ↗
31. Defect physics of the CuInSe2 chalcopyrite semiconductor10.1103/PhysRevB.57.9642 ↗
32. Defect properties of Sb- and Bi-doped CuInSe2: the effect of the deep lone-pair s states10.1063/1.4904223 ↗
33. Photoluminescence characterisations of a dynamic aging process of organic–inorganic CH3NH3PbBr3 perovskite10.1039/C5NR07993D ↗
34. Influence of the Ga-content on the bulk defect densities of Cu(In,Ga)Se210.1016/S0040-6090(00)01710-7 ↗
35. Minority-carrier lifetime and efficiency of Cu(In,Ga)Se2 solar cells10.1063/1.122134 ↗