Full recovery of red zone in p-type high-performance multicrystalline silicon
Source abstract
Abstract
Abstract Between 10% and 30% of commercial cast silicon ingots is discarded due to contamination caused by the casting process. A significant contaminant in the scrap volume is metal precipitates, which are difficult to getter effectively and degrade minority charge carrier lifetime, hence limiting solar cell efficiency potential. We show here that the unusable red zone can be restored in high-performance multicrystalline silicon wafers. Adding a high temperature dissolution anneal prior to phosphorus diffusion dissolves the metal precipitates within the wafer bulk, and leaves the metal point defects in a mobile state to be readily gettered by phosphorus diffusion gettering during the solar cell process. The efficiency of the dissolution gettering treatment increases with increasing temperature, with a temperature of 1150 °C eliminating the very low lifetime region of the wafers completely. Additionally, we find that the red zone does not re-emerge after a 60 min oxidation anneal at 900 °C, confirming that the achieved benefit is tolerant to any high temperature processing following the phosphorus diffusion gettering process.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Silicon Nanostructures and Photoluminescence
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. International Technology Roadmap for Photovoltaic (ITRPV), Results, Seventh Edition, 〈http://www.itrpv.net/Reports/Downloads/〉, 2016. (Accessed 6 Decemeber 2016), 2015.
2. Multicrystalline silicon for solar cells10.1016/j.tsf.2005.01.061 ↗
3. Development of high-performance multicrystalline silicon for photovoltaic industry10.1002/pip.2437 ↗
4. Characterization of high-efficiency multi-crystalline silicon in industrial production10.1016/j.solmat.2013.06.013 ↗
5. Seed-assisted growth of high-quality multi-crystalline silicon in directional solidification10.1016/j.jcrysgro.2013.09.051 ↗
6. C. Lan, C. Hsu, K. Nakajima, Multicrystalline silicon crystal growth for photovoltaic applications, Bulk Cryst. Growth: Basic Tech., and Growth Mechanisms and Dyn., Editors: P. Rudolph, pp. 373–412, 2015.10.1016/B978-0-444-63303-3.00010-9 ↗
7. A. Holt, E. Enebakk, A.-.K. Soiland, Effect of impurities in the minority carrier lifetime of silicon made by the metallurgical route, Proceedings of the 22nd Eur. Photovolt. Sol. Energy Conference, Milan, Italy, pp. 1155–1159, 2007.
8. Origin of the low carrier lifetime edge zone in multicrystalline PV silicon10.1002/pip.876 ↗
9. Impact of impurities from crucible and coating on mc-silicon quality—The example of iron and cobalt10.1109/JPHOTOV.2013.2279116 ↗
10. Solar cell efficiency losses due to impurities from the crucible in multicrystalline silicon10.1109/JPHOTOV.2013.2284060 ↗
11. Identification of the most relevant metal impurities in mc n-type silicon for solar cells10.1016/j.solmat.2015.06.028 ↗
12. Gettering of transition metal impurities during phosphorus emitter diffusion in multicrystalline silicon solar cell processing10.1063/1.2194387 ↗
13. On the electronic improvement of multi-crystalline silicon via gettering and hydrogenation10.1002/pip.775 ↗
14. D. Macdonald, A. Cuevas, A. Kinomura, Y. Nakano, Phosphorus gettering in multicrystalline silicon studied by neutron activation analysis, Conference Rec. of the 29th IEEE Photovolt. Specialists, New Orleans, USA, pp. 285–288, 2002.10.1109/PVSC.2002.1190514 ↗
15. Recovery of minority carrier lifetime in low-cost multicrystalline silicon10.1016/S0927-0248(01)00117-9 ↗
16. A. Bentzen, E.S. Marstein, R. Kopecek, A. Holt, Phosphorus diffusion and gettering in multi-crystalline silicon solar cell processing, Proceedings of the 19th Eur. Photovolt. Sol. Energy Conference, Paris, France, pp. 935–938, 2004.
17. Improved phosphorous gettering of multicrystalline silicon10.1016/j.solmat.2005.05.015 ↗
18. Lifetime improvement after phosphorous diffusion gettering on upgraded metallurgical grade silicon10.1016/j.solmat.2014.02.026 ↗
19. Precipitated iron: a limit on gettering efficacy in multicrystalline silicon10.1063/1.4788800 ↗
20. Analyses of the evolution of iron-silicide precipitates in multicrystalline silicon during solar cell processing10.1109/JPHOTOV.2012.2212699 ↗
21. Dissolution and gettering of iron during contact co-firing10.1016/j.egypro.2011.06.133 ↗
22. S. Mack, U. Jäger, G. Kästner, E.A. Wotke, U. Belledin, A. Wolf, R. Preu, D. Biro, Towards 19% efficient industrial PERC devices using simultaneous front emitter and rear surface passivation by thermal oxidation, Conference Rec. of the 35th IEEE Photovolt. Specialists, Honolulu, USA, pp. 000034–000038, 2010.10.1109/PVSC.2010.5614048 ↗
23. Release of metal impurities from structural defects in polycrystalline silicon10.1063/1.119762 ↗
24. Impact of metal silicide precipitate dissolution during rapid thermal processing of multicrystalline silicon solar cells10.1063/1.2048819 ↗
25. Defect engineering during the contact co-firing step in an industrial belt furnace10.1002/pssc.201200166 ↗
26. Modeling of gettering of precipitated impurities from Si for carrier lifetime improvement in solar cell applications10.1063/1.371075 ↗
27. Effect of high temperature pre-anneal on oxygen precipitates nucleation kinetics in Si10.4028/www.scientific.net/SSP.57-58.123 ↗
28. The impact of different diffusion temperature profiles on iron concentrations and carrier lifetimes in multicrystalline silicon wafers10.1109/JPHOTOV.2012.2231726 ↗
29. C. Ballif, S. Peters, D. Borchert, C. Hässler, J. Isenberg, R. Schindler, W. Warta, G. Willeke, Lifetime investigations of degradation effects in processed multicrystalline silicon wafers, Proceedings of the 17th Eur. Photovolt. Sol. Energy Conference, Munich, Germany, pp. 1818–1821, 2001.
30. D. Macdonald, A. Cuevas, The trade-off between phosphorus gettering and thermal degradation in multicrystalline silicon, Proceedings of the 16th Eur. Photovolt. Sol. Energy Conference, Glasgow, Scotland, pp. 1707–1710, 2000.
31. Iron-rich particles in heavily contaminated multicrystalline silicon wafers and their response to phosphorus gettering10.1088/0268-1242/27/12/125016 ↗
32. Gettering improvements of minority-carrier lifetimes in solar grade silicon10.1016/j.solmat.2012.02.027 ↗
33. Improved iron gettering of contaminated multicrystalline silicon by high-temperature phosphorus diffusion10.1063/1.4808310 ↗
34. Z. Liu, V. Vähänissi, H.S. Laine, M. Lindeberg, M. Yli-Koski, H. Savin, Electronic quality improvement of highly defective quasi-mono silicon material by phosphorus diffusion gettering, Adv. Electron. Mater., 2017 (In press, 〈http://dx.doi.org/10.1002/aelm.201600435〉), article number 1600435, 6 pages.10.1002/aelm.201600435 ↗
35. Sycnhrotron-based investigation of transition-metal getteribility in n-type multicrystalline silicon10.1063/1.4950765 ↗
36. High-performance and traditional multicrystalline silicon: comparing gettering responses and lifetime-limiting defects10.1109/JPHOTOV.2016.2540246 ↗
37. Recombination activity of iron in boron doped silicon10.1238/Physica.Topical.101a00086 ↗
38. A. Haarahiltunen, H. Väinölä, M. Yli-Koski, E. Saarnilehto, J. Sinkkonen, Detection of iron contamination in internally gettered p-type silicon wafers by lifetime measurements, The Electrochemical Society Proceedings Vol. 05, High purity silicon VIII, Editors: C.L. Claeys, M. Watanabe, R. Falster, P. Stallhofer, pp. 135–145, 2004.
39. Engineering metal-impurity nanodefects for low-cost solar cells10.1038/nmat1457 ↗
40. Recombination at metal precipitates in p- and n-type silicon10.1109/JPHOTOV.2015.2438634 ↗
41. Schön · 2011
42. Building intuition of iron evolution during solar cell processing through analysis of different process models10.1007/s00339-015-9317-7 ↗
43. Estimation of the upper limit of the minority-carrier diffusion length in multicrystalline silicon: limitation of the action of gettering and passivation on dislocations
44. Averaging of laterally inhomogeneous lifetimes for one-dimensional modeling of solar cells10.1063/1.1602948 ↗
45. Efficiency limiting bulk recombination in multicrystalline silicon solar cells10.1016/j.solmat.2011.11.047 ↗
46. A simple criterion for predicting multicrystalline Si solar cell performance from lifetime images of wafers prior to cell production10.1063/1.4817272 ↗
47. S.M. Scott, J. Hofstetter, A.E. Morishige, T. Buonassisi, A sacrificial high-temperature phosphorus diffusion gettering process for lifetime improvement of multicrystalline silicon wafers, Conference Rec. of the 40th IEEE Photovolt. Specialists, Denver, USA, pp. 3014–3016, 2014.10.1109/PVSC.2014.6925568 ↗
48. Increasing minority carrier lifetime in as-grown multicrystalline silicon by low temperature internal gettering10.1063/1.4954010 ↗
49. Optimizing phosphorus diffusion for photovoltaic applications: peak doping, inactive phosphorus, gettering, and contact formation10.1063/1.4949326 ↗
50. A. Youssef, J. Schön, T. Niewelt, S. Mack, S. Park, K. Nakajima, K. Morishita, R. Murai, M.A. Jensen, T. Buonassisi, M.C. Schubert, Swirl defect investigation using temperature- and injection-dependent photoluminescence imaging, Conference Rec. of the 43rd IEEE Photovolt. Specialists, Portland, USA, pp. 1303–1307, 2016.10.1109/PVSC.2016.7749826 ↗
51. Dissolution of oxygen precipitate nuclei in n-type CZ-Si wafers to improve their material quality: experimental results10.1109/JPHOTOV.2016.2621345 ↗
52. V. LaSalvia, M.A. Jensen, A. Youssef, W. Nemeth, M. Page, T. Buonassisi, P. Stradins, Utilization of tabula rasa to stabilize bulk lifetimes in n-Cz silicon for high-performance solar cell processing, Conference Rec. of the 43rd IEEE Photovolt. Specialists, Portland, USA, pp. 1047–1050, 2016.10.1109/PVSC.2016.7749771 ↗
53. Dislocation density reduction in multicrystalline silicon solar cell material by high temperature annealing10.1063/1.2990644 ↗