journal article·2013-09

Buffer-free Cu(In,Ga)Se2-solar cells by near-surface ion implantation

J. Haarstrich, M. Teichmann, H. Metzner, M. Gnauck, C. Ronning, W. Wesch, T. Rissom, C.A. Kaufmann, H.W. Schock, V. Scheumann, W. Mannstadt

Publisher page

Abstract

Abstract High-efficiency Cu(In,Ga)Se2 thin-film solar cells typically include CdS buffer layers deposited in a chemical bath. In this work, Cu(In,Ga)Se2 devices are presented in which the CdS buffer layer was omitted completely. Instead, low-energy ion implantation of group-II-elements (Cd, Zn, and Mg) is applied in order to establish an n-type surface layer in p-type Cu(In,Ga)Se2 absorber layers. Therefore, thermal annealing procedures were developed which lead to a full recovery of the implantation induced defects and simultaneously minimize the diffusion of the dopants. Such a treatment is shown to provide high-quality p–n junction functionality and buffer-free Cu(In,Ga)Se2 thin-film solar cells with open-circuit voltages close to 600 mV and efficiencies exceeding 10 %.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. New world record efficiency for Cu(In,Ga)Se2 thin-film solar cells beyond 20%10.1002/pip.1078 ↗
2. Buffer layers in Cu(In,Ga)Se2 solar cells and modules10.1016/j.tsf.2004.11.118 ↗
3. Alternative buffers for chalcopyrite solar cells10.1016/j.solener.2004.06.018 ↗
4. Buffer layers and transparent conducting oxides for chalcopyrite Cu(In,Ga)(S,Se)2 based thin film photovoltaics: present status and current developments10.1002/pip.955 ↗
5. Tunneling-enhanced recombination in Cu(In,Ga)Se2 heterojunction solar cells10.1063/1.122967 ↗
6. Model for electronic transport in Cu(In,Ga)Se2 solar cells10.1002/(SICI)1099-159X(199811/12)6:6<407::AID-PIP230>3.0.CO;2-U ↗
7. Towards an electronic model for CuInxGa1−xSe2 solar cells10.1016/j.tsf.2011.01.092 ↗
8. Characterisation and modelling of chalcopyrite solar cells10.1016/S0040-6090(00)01736-3 ↗
9. Near-interface doping by ion implantation in Cu(In,Ga)Se2 solar cells10.1016/j.tsf.2010.12.090 ↗
10. The electronic structure of chalcopyrites-bands, point defects and grain boundaries10.1002/pip.936 ↗
11. N-type doping of CuInSe2 and CuGaSe210.1103/PhysRevB.72.035211 ↗
12. Analysis of electrical and luminescent properties of CuInSe210.1063/1.321782 ↗
13. Formation of pn homojunction in Cu(InGa)Se2 thin film solar cells by Zn doping10.1143/JJAP.39.4816 ↗
14. Preparation of Zn doped Cu(In,Ga)Se2 thin films by physical vapor deposition for solar cells10.1016/S0927-0248(02)00355-0 ↗
15. Depth profiling of Cu(In,Ga)Se2 thin films grown at low temperatures10.1016/j.solmat.2008.10.009 ↗
16. Ziegler · 2003
17. CuInSe2 solar cells by sequential absorber layer processing10.1002/pssc.200881207 ↗
18. Deposition and characterization of CuInSe210.1016/0960-1481(95)00068-U ↗
19. Phases, morphology, and diffusion in CuInxGa1−xSe2 thin films10.1063/1.366122 ↗
20. Diffusion of Zn in CuInSe2 bulk crystals10.1016/j.jcrysgro.2004.09.085 ↗
21. Diffusion and incorporation of Cd in solar-grade Cu(In,Ga)Se2 layers10.1063/1.3665036 ↗
22. Schottky barrier and pn-junction I/V plots—small signal evaluation10.1007/BF00615935 ↗
23. Modelling the quantum efficiency of cadmium telluride solar cells10.1016/j.solmat.2010.11.011 ↗
24. Evaluation of the CdS/CdTe heterojunction solar cell10.1063/1.323429 ↗
25. Annealing effects on Zn1−xMgxO/CIGS interfaces characterized by ultraviolet light excited time-resolved photoluminescence10.1016/j.solmat.2008.03.014 ↗
26. Wet treatment based interface engineering for high efficiency Cu(In,Ga)Se2 solar cells10.1016/S0040-6090(99)00861-5 ↗