journal article·2016-01

The oxidation effect of a Mo back contact on Cu(In,Ga)(Se,S) thin-film solar modules

Junggyu Nam, Yoonmook Kang, Dongseop Kim, Dohyun Baek, Dongho Lee, JungYup Yang

Publisher page

Abstract

We investigated the surface properties of a Mo back contact for large-area thin-film solar modules with high efficiency and good adhesion between Mo and the absorber layer. It was determined that the appropriate surface properties of Mo would improve the efficiency from 10% to above 15.0±0.21% and narrow the efficiency distribution in large-area modules. The Mo back contact was annealed at various temperatures between room temperature and 230 °C in air to control the amount of sodium diffusing from the soda-lime glass substrate during selenization and sulfurization, and to improve the uniformity of the unit cell. Before the heat treatment, the amount of sodium in the patterned area of the unit cell was more than 10 times of that in the central area of the cell. The patterned region with higher Na content had smaller grains than those in the central area with less Na, resulting in many peel-offs and shunting paths. The difference in sodium content was reduced after heat treatment. The optimized surface oxide of the Mo back contact had a thickness of around 3–5 nm and consisted of the MoO 3 phase. The grain boundary of Mo columnar structure near the surface consisted of the oxide layer.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Effect of a Mo back contact on Na diffusion in CIGS thin film solar cells10.1002/pip.2193 ↗
2. J.H. Scofield, Sodium diffusion, selenization, and microstructural effects associated with various molybdenum back contact layers for CIS-based solar cells, in: Conference Record of the 24th IEEE Photovoltaic Specialists Conference – 1994 IEEE First World Conference on Photovoltaic Energy Conversion, IEEE, New York, 1995, pp. 164–167.10.1109/WCPEC.1994.519833 ↗
3. Na incorporation in Mo and CuInSe2 from production processes10.1016/S0927-0248(99)00026-4 ↗
4. H.A. Al-Thani, F.S. Hasoon, M. Young, S. Asher, J.L. Alleman, M.M. Al-Jassim, D.L. Williamson, The effect of Mo back contact on Na out-diffusion and device performance of Mo/Cu(In,Ga)Se2/CdS/ZnO solar cells, in: Conference Record of the 29th IEEE Photovoltaic Specialists Conference, IEEE, New York, 2002, pp. 720–723.10.1109/PVSC.2002.1190666 ↗
5. R. Krishnan, E.A. Payzant, R. Kacnyzki, U. Schoop, J. Britt, R. Noufi, T.J. Anderson, Reaction kinetics and pathways of MoSe2, in: Proceedings of the 35th IEEE Photovoltaic Specialists Conference, IEEE, New York, 2010, pp. 1006–1008.10.1109/PVSC.2010.5614604 ↗
6. Progress in large-area Cu(InGa)Se2-based thin-film modules with a Zn(O,S,OH)x buffer layer10.1016/S0927-0248(00)00258-0 ↗
7. Tarrant · 2006 · 02
8. Electrical properties of the Cu(In,Ga)Se2/MoSe2/Mo structure10.1016/S0927-0248(00)00283-X ↗
9. Characterization of the Cu(In,Ga)Se2/Mo interface in CIGS solar cells10.1016/S0040-6090(00)01846-0 ↗
10. Characterization of MoSe2 thin films10.1016/0040-6090(88)90032-6 ↗
11. D.C. Fisher, I.L. Repins, J. Schaefer, M.E. Beck, W.K. Batchelor, M. Young, S. Asher, The effect of Mo morphology on the performance of Cu(In,Ga)Se2 thin films, in: Proceedings of the 31st IEEE Photovoltaic Specialists Conference, IEEE, New York, 2005.
12. The effect of Mo back contact ageing on Cu(In,Ga)Se2 thin-film solar cells10.1002/pip.2360 ↗
13. I. Repins, S. Glynn, J. Duenow, T.J. Coutts, W. Metzger, M.A. Contreras, Required Materials Properties for High-efficiency CIGS Modules, Conference paper NREL/CP-520-46235, July 2009.10.1117/12.828365 ↗
14. M. Ruckh, D. Schmid, M. Kaiser, R. Schaffler, T. Walter, H.W. Schock, Influence of substrates on the electrical properties of Cu(In,Ga)Se2 thin films, in: Conference Record of the 24th IEEE Photovoltaic Specialists Conference – 1994 IEEE First World Conference on Photovoltaic Energy Conversion 1994, IEEE, New York, 1995, pp. 156–159.10.1109/WCPEC.1994.519831 ↗
15. R.J. Matson, J.E. Granata, S.E. Asher, M.R. Young, Effects of substrate and Na concentration on device properties, junction formation, and film microstructure in CIS PV devices, in: NCPV Photovoltaics Program Review: Proceedings of the 15th Conference, vol. 462, 1998, pp. 542–549.10.1063/1.57921 ↗
16. Na in selenized Cu(In,Ga)Se2 on Na-containing and Na-free glasses: distribution, grain structure, and device performances10.1016/S0040-6090(00)01028-2 ↗
17. Influence of sodium on the growth of polycrystalline Cu(In,Ga)Se2 thin films10.1016/S0040-6090(99)00777-4 ↗
18. Morphology and deposition temperature on CIGS solar cells10.1557/PROC-668-H2.3 ↗
19. Photoluminescence properties of sodium incorporated in CuInSe2 thin films10.1143/JJAP.38.L289 ↗
20. M.A. Contreras, B. Egaas, P. Dippo, J. Webb, J. Granata, K. Ramanathan, S. Asher, A. Swartzlander, R. Noufi, On the role of Na and modifications to CIGS absorber materials using thin MF (M=Na, K, Cs) precursor layers, in: Conference Record of the 26th IEEE Photovoltaic Specialists Conference, IEEE, New York, 1997, pp. 359–362.10.1109/PVSC.1997.654102 ↗
21. Improved compositional flexibility of CIGS based thin film solar cells by sodium control technique10.1016/S0927-0248(97)00202-X ↗
22. The effect of NaF on Cu(In,Ga)Se2 thin film solar cells10.1016/S0927-0248(99)00089-6 ↗
23. J.E. Granata, J.R. Sites, S. Asher, R. Matson, Quantitative incorporation of sodium in CuInSe2 and Cu(In,Ga)Se2 photovoltaic devices, in: Conference Record of the Twenty Sixth IEEE Photovoltaic Specialists Conference, IEEE, New York, 1997, pp. 387–390.
24. J.E. Granata, J.R. Sites, Impact of sodium in the bulk and in grain boundaries of CIS, in: Proceedings of the 2nd World Conference on Photovoltaic Solar Energy Conversion, 1998, pp. 604–607.
25. Advanced stacked elemental layer process for CIGS thin-film photovoltaic devices10.1557/PROC-426-165 ↗
26. The behavior of Na implant into Mo thin films during annealing10.1016/S0927-0248(98)00203-7 ↗
27. Determination of activation barriers for the diffusion of sodium through CIGS thin-film solar cells10.1002/pip.515 ↗
28. Understanding the role of oxygen in the segregation of sodium at the surface of molybdenum coated soda-lime glass10.1002/aic.14425 ↗
29. Atom probe study of sodium distribution in polycrystalline Cu(In,Ga)Se2 thin film10.1016/j.actamat.2009.12.049 ↗
30. Direct observation of Na and O impurities at grain surfaces of CuInSe2 thin films10.1116/1.581583 ↗