journal article·2021-01

Performance enhancement of Cu2ZnSn(S, Se)4 solar cells by post-selenization of absorber layer in thermal-cracked selenium atmosphere

Ke Cheng, Huan Suo, Xueru Gao, Ziqi Zhang, Zhiwen Liu, Qihang Shen, Jingling Liu, Xinsheng Liu, Zuliang Du

Publisher page

Abstract

Abstract Self-designed selenium thermal-cracking system is used to produce selenium vapor with high activity for sufficient selenization of CZTSSe absorber. CZTS precursor film prepared by magnetron sputtering of CZTS quaternary target. By adjusting the heating temperature of selenium source to 600 °C, macromolecular Sen can be cracked to small molecule Sen with high reaction activity, which is helpful to form densely packed large grains in the CZTSSe absorber due to the reduction of selenium vacancies and the enhancement of surface migration. The crystallization quality of CZTSSe absorber is further improved by the optimization of selenium source heating rate. A peak performance of solar cells achieved exhibiting a power conversion efficiency of 7.9%, with Voc of 410 mV, Jsc of 35.25 mA/cm2 and FF of 54.98%. J-V characterization, electrochemical impedance spectra and capacitance-voltage tests are also employed to analysis the device performance enhancement mechanism.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Kesterite thin-film solar cells: advances in materials modelling of Cu2ZnSnS410.1002/aenm.201100630 ↗
2. Progress and perspectives of thin film kesterite photovoltaic technology: a critical review10.1002/adma.201806692 ↗
3. Is it possible to develop complex S-Se graded band gap profiles in kesterite-based solar cells?10.1021/acsami.9b09813 ↗
4. Cd-free Cu2ZnSnS4 solar cell with an efficiency greater than 10% enabled by Al2O3 passivation layers10.1039/C9EE01726G ↗
5. CZTS nanocrystals: a promising approach for next generation thin film photovoltaics10.1039/c3ee41627e ↗
6. Cation substitution in earth-abundant kesterite photovoltaic materials
7. Effect of solid-H2S gas reactions on CZTSSe thin film growth and photovoltaic properties of a 12.62% efficiency device10.1039/C9TA08310C ↗
8. Earth-abundant element photovoltaics directly from soluble precursors with high yield using a non-toxic solvent10.1002/aenm.201100140 ↗
9. The state and future prospects of kesterite photovoltaics10.1039/c3ee41781f ↗
10. Is the Cu/Zn disorder the main culprit for the voltage deficit in kesterite solar cells?10.1002/aenm.201502276 ↗
11. Effects of metal ion concentration on electrodeposited CuZnSn film and its application in kesterite Cu2ZnSnS4 solar cells10.1039/C5RA09966H ↗
12. Preparation of Cu2ZnSnS4 (CZTS) sputtering target and its application to the fabrication of CZTS thin-film solar cells10.1016/j.jallcom.2015.09.111 ↗
13. A CZTSe solar cell with 8.2% power conversion efficiency fabricated using electrodeposited Cu/Sn/Zn precursor and a three-step selenization process at low Se pressure10.1016/j.solmat.2016.09.028 ↗
14. Device characteristics of band gap tailored 10.04% efficient CZTSSe solar cells sprayed from water-based solution10.1021/acsami.9b12565 ↗
15. Flexible high-efficiency CZTSSe solar cells on stainless steel substrates10.1039/C9TA08265D ↗
16. Studies of the fine-grain sub-layer in the printed CZTSSe photovoltaic devices10.1039/c4tc00391h ↗
17. Towards environmentally benign approaches for the synthesis of CZTSSe nanocrystals by a hot injection method: a status review10.1039/C4CC03176H ↗
18. Room-temperature surface sulfurization for high-performance kesterite CZTSe solar cells
19. Comment on the composition of selenium vapor10.1063/1.1668677 ↗
20. Equilibrium composition of selenium vapor; the thermodynamics of the vaporization of HgSe, CdSe, and SrSe10.1063/1.1727488 ↗
21. Composition of liquid-saturated selenium vapor10.1007/BF02661030 ↗
22. The influence of cracked selenium flux on CIGS thin film growth and device performance prepared by two-step selenization processes10.1016/j.solmat.2015.03.021 ↗
23. Growth of Cu2ZnSnSe4 film under controllable Se vapor composition and impact of low Cu content on solar cell efficiency10.1021/acsami.6b00081 ↗
24. Revealing the role of potassium treatment in CZTSSe thin film solar cells10.1021/acs.chemmater.7b00418 ↗
25. X-ray diffraction and the bragg equation10.1021/ed074p129 ↗
26. Limiting effects of conduction band offset and defect states on high efficiency CZTSSe solar cell10.1016/j.nanoen.2017.12.031 ↗
27. Membrane assembled from anti-fouling copper-zinc-tin-selenide nanocarambolas for solar-driven interfacial water evaporation10.1016/j.cej.2019.05.099 ↗
28. Fabrication of a Cu2ZnSn(S,Se)4 photovoltaic device by a low-toxicity ethanol solution process10.1021/am402558a ↗
29. Effect of pressing pressure on the performance of perovskite solar cells10.1021/acsaem.8b01608 ↗
30. Boosting the efficiency of solution-based CZTSSe solar cells by using supercritical carbon dioxide treatment10.1039/D0GC01355B ↗
31. The effects of SnS2 secondary phases on Cu2ZnSnS4 solar cells: a promising mechanical exfoliation method for its removal10.1039/C7TA08242H ↗
32. Cation substitution of solution-processed Cu2ZnSnS4 thin film solar cell with over 9% efficiency10.1002/aenm.201500682 ↗
33. Nanoscale electrical property enhancement through antimony incorporation to pave the way for the development of low-temperature processed Cu2ZnSn(S,Se)4 solar cells10.1039/C8TA11783G ↗
34. Daniel · 2011
35. 10% efficiency Cu2ZnSn(S, Se)4 thin film solar cells fabricated by magnetron sputtering with enlarged depletion region width10.1016/j.solmat.2016.02.002 ↗