journal article·2020-09

Balanced contact method: Reduction of thermomechanical stress in silicon solar cells induced by interconnection

Pei-Chieh Hsiao, Xiaowei Shen, Zhimeng Wang, Ning Song, Yang Li, Zi Ouyang, Chen Zhu, Jun Lv, Canjun Shen, Cheng Chen, Guoqing Chen, Alison Lennon

Publisher page

Abstract

Abstract In this study, a new method to reduce the thermomechanical stress in silicon solar cells induced during the cell interconnection process is proposed. By repositioning the rear pads such that the silicon solar cells are bonded to the front copper conductors ended at the same locations as the outer edges of the outermost rear pads along the busbar direction. Finite element modelling predicts that stress reduction of >50% was achieved when solar cells are interconnected by conventional tabbing or Multi-busbars (MBB) and it was confirmed by the derived stress measured by the micro-Raman spectroscopy. Front busbars terminated with a reduced contact area can further increase the tolerance of any potential misalignment arising from process variations.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Electronic Packaging and Soldering Technologies · Silicon Carbide Semiconductor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Investigation of thermomechanical stress in solar cells with multi busbar interconnection by finite element modeling
2. Comparative models of induced thermomechanical stress in silicon solar cells interconnected with conventional tabbing and wire-based interconnection methods
3. Solar cell efficiency improvement by new metallization techniques - the Day4 electrode concept
4. Smart wire connection technology
5. Smartwire solar cell interconnection technology
6. Metallization and interconnection for high-efficiency bifacial silicon heterojunction solar cells and modules
7. Evaluation of bismuth-based solder alloys for low-stress interconnection of industrial crystalline silicon PV cells
8. Pearce
9. Lead-free electrical conductive adhesives for solar cell interconnectors
10. Characterization of electrically conductive adhesives10.1016/j.egypro.2012.07.128 ↗
11. Electrically conductive adhesives an emerging interconnection technology for high-efficiency solar modules
12. Enablers for IBC: integral cell and module development and implementation in PV industry10.1016/j.egypro.2017.09.355 ↗
13. Conductive adhesives for metallization of interdigitated back contact solar cells
14. Shingled cell interconnection: a new generation of bifacial PV-modules
15. Shingling technology for cell interconnection: technological aspects and process integration10.1016/j.egypro.2018.09.010 ↗
16. FEM simulation of deformations in strings of shingled solar cells subjected to mechanical reliability testing10.1063/1.5125881 ↗
17. Electrically conductive adhesives as cell interconnection material in shingled module technology
18. The impact of yield strength of the interconnector on the internal stress of the solar cell within a module
19. Mechanical stress in solar cells with multi busbar interconnection—parameter study by FEM simulation
20. Ultra-soft wires for direct soldering on finger grids of solar cells10.1016/j.egypro.2017.09.284 ↗
21. Ribbon interconnection of 6” BC-BJ solar cells10.1016/j.egypro.2017.09.287 ↗
22. Mechanical and electrical properties of wave-shaped wires for low-stress interconnection of solar cells10.1016/j.solmat.2017.11.022 ↗
23. Wave-shaped wires soldered on the finger grid of solar cells: solder joint stability under thermal cycling
24. Electronic effects in the elastic constants of n-type silicon10.1103/PhysRev.161.756 ↗
25. Linear thermal expansion measurements on silicon from 6 to 340 K10.1063/1.323747 ↗
26. Thermal expansion reference data: silicon 300-850 K10.1088/0022-3727/14/10/003 ↗
27. Constitutive equations for hot-working of metals10.1016/0749-6419(85)90004-X ↗
28. Applying Anand model to represent the viscoplastic deformation behavior of solder alloys10.1115/1.1371781 ↗
29. Modeling and testing the mechanical strength of solar cells10.1016/j.solmat.2013.06.048 ↗
30. http://www.confirmware.com/productinfo/1322998.html, (Last accessed 18/04/2020).
31. https://ecoprogetti.com/wp-content/uploads/2016/11/ETS2100_datasheet-4.pdf, (Last accessed 04/07/2019).
32. http://www.china-solarpower.com/en/Products/Chuanhanji/332.html, (Last accessed 04/07/2019).
33. http://www.confirmware.com/productinfo/1322997.html, (Last accessed 04/07/2019).
34. P.-C. Hsiao and A. Lennon, "Method for Reducing Thermomechanical Stress in Solar Cells," Australia, AU2019900521 Patent Appl. AU2019900521, 2019.
35. Micro-Raman spectroscopy to study local mechanical stress in silicon integrated circuits10.1088/0268-1242/11/2/001 ↗
36. Enabling stress determination on alkaline textured silicon using Raman spectroscopy10.1016/j.egypro.2017.09.333 ↗
37. Analyses of warpage effects induced by passivation and electrode coatings in silicon solar cells
38. Siewert · 2002 · vol. 4 · 1