Ionizing radiation exposure reveals instability of purified domains in polymer/fullerene solar cells
Source abstract
Abstract
Abstract Solar cells based on conjugated polymer and fullerene blends exhibit morphology-dependent stability towards ionizing radiation exposure. Blend thin film solar cells of poly(3-hexylthiophene) (P3HT) and [6,6]-phenyl-C60-butyric acid methyl ester (PCBM) were irradiated up to 1 Mrad with X-rays (10–60 KeV) and investigated with resonance Raman and photocurrent/photovoltage modulation spectroscopy and imaging. Bulk blend morphological characteristics were pre-selected by controlling film processing conditions (i.e., solvent and thermal annealing). As-cast P3HT/PCBM devices with a large fraction of a well-mixed phase display improvements in performance upon application of post-irradiation annealing treatments. On the other hand, devices annealed prior to irradiation showed irreversible performance degradation that could not be recovered following annealing treatments after exposure. Resonance Raman spectroscopy and imaging following irradiation up to 1 Mrad reveals virtually no changes in the P3HT structural and packing integrity for both types of devices. Intensity modulated photocurrent/photovoltage spectroscopy measurements indicate that radiation-induced performance degradation is concentrated in the vicinity of device contacts, evident from large alterations in charge extraction kinetics. We propose that charge transfer from the aluminum cathode leads to formation of a space charge zone which becomes more pronounced in devices with greater phase purification (i.e., larger PCBM crystallites in the vicinity of the cathode). Importantly, well-mixed P3HT/PCBM regions, which are more plentiful in as-cast devices, appear to mitigate radiation-induced performance degradation since application of post-irradiation annealing treatments restores device performances to pristine levels. Our results suggest that greater morphological stability, such as polymer/fullerene systems forming co-crystals, is key for suppressing performance losses from ionizing radiation exposure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Solar cell efficiency tables (version 39)10.1002/pip.2163 ↗
2. Efficiency of bulk-heterojunction organic solar cells10.1016/j.progpolymsci.2013.05.001 ↗
3. Definition of encapsulation barrier requirements: aa method applied to organic solar cells10.1016/j.solmat.2011.01.035 ↗
4. A new encapsulation solution for flexible organic solar cells10.1016/j.tsf.2005.12.091 ↗
5. Modeling of the X-irradiation response of the carrier relaxation time in P3HT:PCBM organic-based photocells10.1109/TNS.2012.2222666 ↗
6. Ionizing radiation induced parametric variations in P3HT:PCBM organic photovoltaic cells10.1116/1.4917008 ↗
7. Transient measurements of carrier relaxation time and density in the P3HT:PCBM organic photovoltaic cell10.1116/1.4918674 ↗
8. Radiation induced damage and recovery in poly(3-hexyl thiophene) based polymer solar cells10.1088/0957-4484/19/42/424014 ↗
9. Radiation induced recombination centers in organic solar cells10.1103/PhysRevB.85.205211 ↗
10. A polymer tandem solar cell with 10.6% power conversion efficiency10.1038/ncomms2411 ↗
11. Pathways for the degradation of organic photovoltaic P3HT:PCBM based devices10.1016/j.solmat.2008.01.020 ↗
12. Origin of radiation induced damage in organic P3HT:PCBM based photocells
13. Femtosecond X-ray-induced explosion of C60 at extreme intensity10.1038/ncomms5281 ↗
14. Radiation damage in polymer films from grazing-incidence x-ray scattering measurements10.1002/polb.24006 ↗
15. Resonance Raman spectroscopic- and photocurrent imaging of polythiophene/fullerene solar cells10.1021/jz900038c ↗
16. Spectroscopic and intensity modulated photocurrent imaging of polymer/fullerene solar cells10.1021/acsami.5b08724 ↗
17. Spatially resolving ordered and disordered conformers and photocurrent generation in intercalated conjugated polymer/fullerene blend solar cells10.1021/cm501252y ↗
18. Long-term operational lifetime and degradation analysis of P3ht:Pcbm photovoltaic cells10.1016/j.solmat.2010.09.007 ↗
19. Understanding the origin of the s-curve in conjugated polymer/fullerene photovoltaics from drift-diffusion simulations10.1063/1.4817396 ↗
20. Efficiency limiting factors of organic bulk heterojunction solar cells identified by electrical impedance spectroscopy10.1016/j.solmat.2006.10.020 ↗
21. Using resonance energy transfer to improve exciton harvesting in organic-inorganic hybrid photovoltaic cells10.1002/adma.200501307 ↗
22. S-shaped current-voltage characteristics of organic solar devices10.1103/PhysRevB.82.115306 ↗
23. Tress · 2014
24. Tuning the performance of organic spintronic devices using x-ray generated traps10.1103/PhysRevLett.109.076603 ↗
25. Ultrafast studies of exciton migration and polaron formation in sequentially solution-processed conjugated polymer/fullerene quasi-bilayer photovoltaics10.1021/jz300762c ↗
26. Bimolecular recombination in organic photovoltaics10.1146/annurev-physchem-040513-103615 ↗
27. Influence of phase segregation on recombination dynamics in organic bulk-heterojunction solar cells10.1002/adfm.201002358 ↗
28. On the origin of the quadrant I semicircle in intensity-modulated photocurrent spectra of P3HT:PCBM bulk heterojunction solar cells: evidence of degradation-related trap-assisted recombination10.1021/jp310841v ↗
29. Effects of aging and annealing on the density of trap states in organic photovoltaic materials10.1021/jp4114915 ↗
30. Singlet oxygen as a reactive intermediate in the photodegradation of an electroluminescent polymer10.1021/ja00146a004 ↗
31. Interaction of oxygen with conjugated polymers: charge transfer complex formation with poly(3-alkylthiophenes)10.1021/ja964229j ↗
32. Mechanism of recombination losses in bulk heterojunction P3HT:PCBM solar cells studied using intensity modulated photocurrent spectroscopy10.1021/am100998t ↗
33. On accurate capacitance characterization of organic photovoltaic cells10.1063/1.4720403 ↗
34. First step into space: Performance and morphological evolution of P3ht:Pcbm bulk heterojunction solar sells under AM0 illumination10.1021/am504608p ↗
35. Resonance chemical imaging of polythiophene/fullerene photovoltaic thin films: Mapping morphology-dependent aggregated and unaggregated C=C species10.1021/ja900636z ↗
36. Structure and morphology control in thin films of regioregular poly(3-hexylthiophene)10.1002/polb.22310 ↗
37. Photo- and thermal degradation of MDMO-PPV:PCBM blends10.1016/j.solmat.2006.10.015 ↗
38. Effects of long-term UV–visible light irradiation in the absence of oxygen on P3HT and P3HT:PCBM blends10.1016/j.solmat.2010.03.012 ↗
39. Photoinduced degradation of polymer and polymer-fullerene active layers: experiment and theory10.1002/adfm.201001079 ↗
40. Generic roll-to-roll compatible method for insolubilizing and stabilizing conjugated active layers based on low energy electron irradiation10.1002/app.40795 ↗
41. Influence of fullerene photodimerization on the pcbm crystallization in polymer: fullerene bulk heterojunctions under thermal stress10.1002/polb.23330 ↗
42. On the action of γ radiation on solid C60 and C70 fullerenes: a comparison with graphite irradiation10.1080/10641220009351435 ↗
43. Effects of high energy radiation on polymers