journal article·2002-10

Rapid thermal technologies for high-efficiency silicon solar cells

A. Ebong, Y.H. Cho, M. Hilali, A. Rohatgi, D. Ruby

Publisher page

Abstract

This paper shows that rapidly formed emitters in less than 6 min in the hot zone of a conveyor belt furnace or in 3 min in an rapid thermal processing (RTP) system, in conjunction with a screen-printed (SP) RTP Al-BSF and passivating oxide formed simultaneously in 2 min can produce very simple high-efficiency n + -p-p + cells with no surface texturing, point contacts, or selective emitter. It is shown for the first time that an 80Ω/□ emitter and SP Al-back surface field (BSF) formed in a high throughput belt furnace produced 19% FZ cells and greater than 17% CZ cells with photolithography (PL) contacts. Using PL contacts, we also achieved 19% efficient cells on FZ, > 18% on MCZ, and ∼ 17% boron-doped CZ by emitter and SP Al-BSF formation in < 10 min in a single wafer RTP system. Finally, manufacturable cells with 45 Ω/□ emitter and SP Al-BSF and Ag contacts formed in the conveyor belt furnace gave 17% efficient cells on FZ silicon. Compared to the PL cells, the SP cell gave ∼2% lower efficiency along with a decrease in J sc and fill factor. This loss in performance is attributed to a combination of the poor blue response, higher series resistance and higher contact shading in the SP devices.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (4)

Show source-provided references
1. A. Rohatgi, P. Doshi, T. Krygowski, Pushing the frontiers of silicon PV technologies: novel approaches to high-efficiency, manufacturable silicon cells, AIP Proceedings of NREL/SNL Photovoltaics Program Review, 1997, pp. 109–115.10.1063/1.53470 ↗
2. R.L. Crab, Photon induced degradation of electron irradiated silicon solar cells, Proceedings of the Ninth IEEE Photovoltaic Specialists Conference, Silver Springs, 1972, pp. 329–330.
3. S.W. Glunz, S. Rein, W. Warta, J. Knobloch, W. Wettling, Comparison of lifetime degradation in boron, gallium doped p-type CZ-Si. Technical Digest, 11th PVSEC, Saporo, Hokkaido, Japan, 1999, pp. 549–552.
4. Modeling and characterization of high-efficiency silicon solar cells fabricated by rapid thermal processing, screen printing, and plasma-enhanced chemical vapor deposition10.1109/16.622596 ↗