Layout optimization of organic wrap through solar cells by combined electrical and optical modeling
Source abstract
Abstract
Abstract In organic wrap through solar cells the current which is collected by poly(3,4-ethylenedioxythiophene) doped with poly(styrenesulfonate) (PEDOT:PSS) at the illuminated front side is transferred through vias which are distributed over the cell to another metal layer on the backside. They feature a low area loss and the possibility of broad cell stripes in modules. A combined optical and electrical model is applied on organic wrap through solar cells to optimize the layout. Calculating the absorption by the transfer matrix formalism allows to identify the optimum layer thickness for the PEDOT:PSS which depends on the transparency and the conductivity. The efficiency turns out to be robust regarding layer thickness variations close to the optimum at a layer thickness of 200 nm for the PEDOT:PSS. The via diameter has to be chosen as small as possible for the best performance and the parasitic resistances caused by the PEDOT:PSS and the vias mainly determine the optimum distance between the vias. It is furthermore possible to use the model to estimate the series resistance of the vias and the series resistance which can be attributed to the transport through the photoactive layer and its interfaces which is helpful for further device optimization. Wrap through solar cells on plastic substrates were manufactured with a maximum efficiency of 2.8% on a cell area of 2.25 cm 2 . The investigations revealed that there is further optimization potential by optimizing the processing of the active layer.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Indium tin oxide-free semi-transparent inverted polymer solar cells using conducting polymer as both bottom and top electrodes10.1016/j.orgel.2009.06.019 ↗
2. A mechanical assessment of flexible optoelectronic devices10.1016/S0040-6090(01)01138-5 ↗
3. A complete process for production of flexible large area polymer solar cells entirely using screen printing—first public demonstration10.1016/j.solmat.2008.12.001 ↗
4. Flexible, long-lived, large-area, organic solar cells10.1016/j.solmat.2006.10.013 ↗
5. Organic solar cell modules for specific applications—from energy autonomous systems to large area photovoltaics10.1016/j.tsf.2007.12.093 ↗
6. AZO/Ag/AZO multilayer films prepared by DC magnetron sputtering for dye-sensitized solar cell application10.1016/j.cap.2009.09.020 ↗
7. Characteristics of indium-free GZO/Ag/GZO and AZO/Ag/AZO multilayer electrode grown by dual target DC sputtering at room temperature for low-cost organic photovoltaics10.1016/j.solmat.2009.07.016 ↗
8. Aluminum doped zinc oxide for organic photovoltaics10.1063/1.3142423 ↗
9. Investigation of conductive and transparent Al-doped ZnO/Ag/Al-doped ZnO multilayer coatings by electron beam evaporation10.1016/j.tsf.2007.08.089 ↗
10. Inverted ITO-free organic solar cells based on p and n semiconducting oxides. New designs for integration in tandem cells, top or bottom detecting devices, and photovoltaic windows10.1039/C0EE00318B ↗
11. Towards efficient tin-doped indium oxide ITO-free inverted organic solar cells using metal cathodes10.1063/1.3059552 ↗
12. Improved light harvesting in tin-doped indium oxide ITO-free inverted bulk-heterojunction organic solar cells using capping layers10.1063/1.2981525 ↗
13. Top light-harvesting organic solar cell using ultrathin Ag/MgAg layer as anode10.1143/JJAP.46.1734 ↗
14. Electrospun metal nanofiber webs as high-performance transparent electrode10.1021/nl102725k ↗
15. Solution-processed metal nanowire mesh transparent electrodes10.1021/nl073296g ↗
16. Organic solar cells with carbon nanotubes replacing In2O310.1063/1.2210081 ↗
17. Transparent carbon films as electrodes in organic solar cells10.1002/ange.200704909 ↗
18. Continuous, highly flexible, and transparent graphene films by chemical vapor deposition for organic photovoltaics10.1021/nn901587x ↗
19. Indium tin oxide-free and metal-free semitransparent organic solar cells10.1063/1.3499299 ↗
20. Investigation on polymer anode design for flexible polymer solar cells10.1063/1.2945796 ↗
21. Highly efficient organic solar cells with printable low-cost transparent contacts10.1063/1.2907564 ↗
22. Efficient and flexible ITO-free organic solar cells using highly conductive polymer anodes10.1002/adma.200800338 ↗
23. High efficiency flexible ITO-free polymer/fullerene photodiodes10.1039/b607016g ↗
24. ITO-free flexible organic solar cells with printed current collecting grids10.1016/j.solmat.2010.08.011 ↗
25. Electrode grids for ITO-free organic photovoltaic devices10.1002/adma.200602561 ↗
26. Organic solar cells using inverted layer sequence10.1016/j.tsf.2005.06.006 ↗
27. Printable anodes for flexible organic solar cell modules10.1016/j.tsf.2003.11.038 ↗
28. ITO-free wrap through organic solar cells—a module concept for cost-efficient reel-to-reel production10.1016/j.solmat.2006.10.005 ↗
29. ITO-free flexible inverted organic solar cell modules with high fill factor prepared by slot die coating10.1016/j.solmat.2010.11.025 ↗
30. Longterm stability of efficient inverted P3HT10.1016/j.solmat.2008.12.022 ↗
31. Modeling the optical absorption within conjugated polymer/fullerene-based bulk-heterojunction organic solar cells10.1016/S0927-0248(03)00137-5 ↗