Band gap tunable benzodithiophene-based donor-rich semi-random D–A copolymers with active layer thickness tolerance for organic solar cells
Source abstract
Abstract
Abstract A series of donor-rich semi-random copolymers with various benzodithiophene (donor unit)/fluorinated-thienothiophene (acceptor unit) ratios – D2A, D3A, D5A, D7A – were designed and synthesized for use in polymer solar cells (PSCs). The polymer D1A was also synthesized for comparison. The optical and electrochemical properties of these polymers vary with the number of donor units in their polymer backbones. The device containing the polymer D5A exhibits a best power conversion efficiency (PCE) of 5.52% when the active layer thickness is 340 nm, a value that is 80% of its maximum PCE, whereas the best PCE of the D1A-based device is reduced by 32% when the active layer thickness is 310 nm. A large area (6,270 mm 2 ) D5A-based device prepared with the slot die-coating method was found to exhibit a best PCE of 6.54%, which is significantly better than that of the equivalent D1A-based large area device (4.03%).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Perovskite Materials and Applications · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Plastic solar cells10.1002/1616-3028(200102)11:1<15::AID-ADFM15>3.0.CO;2-A ↗
2. Efficient photodiodes from interpenetrating polymer networks10.1038/376498a0 ↗
3. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor–acceptor heterojunctions10.1126/science.270.5243.1789 ↗
4. Solar cell efficiency tables (version 43)10.1002/pip.2452 ↗
5. Molecular design of photovoltaic materials for polymer solar cells: electronic energy levels and broad absorption10.1021/ar2002446 ↗
6. Conjugated polymer-based organic solar cells10.1021/cr050149z ↗
7. Fullerene derivative-doped zinc oxide nanofilm as the cathode of inverted polymer solar cells with low-bandgap polymer (PTB7-Th) for high performance10.1002/adma.201301476 ↗
8. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
9. Solar cell efficiency tables (version 38)10.1002/pip.1150 ↗
10. Organic photovoltaics10.1016/S1369-7021(13)70013-0 ↗
11. Conjugated polymer photovoltaic cells10.1021/cm049654n ↗
12. Organic photovoltaics: technology and market10.1016/j.solmat.2004.02.030 ↗
13. Roll-to-roll fabrication of polymer solar cells10.1016/S1369-7021(12)70019-6 ↗
14. Bulk heterojunction solar cells using thieno[3,4-c]pyrrole-4,6-dione and dithieno[3,2-b:2′,3′-d]silole copolymer with a power conversion efficiency of 7.3%10.1021/ja200314m ↗
15. Efficient small bandgap polymer solar cells with high fill factors for 300nm thick films10.1002/adma.201300017 ↗
16. Tuning fluorinated benzotriazole polymers through alkylthio substitution and selenophene incorporation for bulk heterojunction solar cells10.1021/ma5001095 ↗
17. Thiophene-thiazolothiazole copolymers: significant impact of side chain composition on backbone orientation and solar cell performances10.1002/adma.201303059 ↗
18. Low band-gap conjugated polymers with strong interchain aggregation and very high hole mobility towards highly efficient thick-film polymer solar cells10.1002/adma.201305092 ↗
19. Development of New semiconducting polymers for high performance solar cells10.1021/ja808373p ↗
20. For the bright future-bulk heterojunction polymer solar cells with power conversion efficiency of 7.4%10.1002/adma.200903528 ↗
21. Efficient two layer LEDs on a polymer blend basis10.1002/adma.19950070608 ↗
22. Design rules for donors in bulk-heterojunction solar cells-towards 10% energy-conversion efficiency10.1002/adma.200501717 ↗
23. Hole mobility in optimized organic photovoltaic blend films obtained using extraction current transients10.1016/j.orgel.2009.08.003 ↗
24. The effect of carrier mobility in organic solar cells10.1063/1.3327210 ↗
25. Balanced charge carrier mobilities in bulk heterojunction organic solar cells10.1063/1.4745602 ↗
26. Polymer-fullerene bulk-heterojunction solar cells10.1002/adma.200801283 ↗
27. Effective variables to control the fill factor of organic photovoltaic cells10.1021/am900155y ↗
28. Role of balanced charge carrier transport in low band gap polymer:Fullerene bulk heterojunction solar cells10.1002/polb.22243 ↗