Thermally and air–plasma-oxidized titanium and stainless steel plates as solar selective absorbers
Source abstract
Abstract
Abstract Solar selective surfaces can be constructed in many ways. In particular, low emissivity (e) is currently sought for by starting with surfaces bearing high infrared reflectance. It is well known that metallic surfaces behave in this way. Then, high solar absorptance (α) can be achieved by adding an appropriate thin layer through a wide variety of possibilities. In this work, a simple direct method to produce such type of coatings on titanium and 304 stainless steel plates is assessed: thermal oxidation. Good selectivities S(=α/e) 10 or higher in some cases were obtained mainly on steel substrates. An alternative is to expose these metallic surfaces to ionized oxygen species, rather than to neutral oxygen molecules. This was accomplished by oxidizing some plates in a typical glow discharge capacitive system. In this case, acceptable but not so high selectivities, as in the first case, were obtained. Some comments on the metallic surface morphology and the stability of the oxidized surfaces are also presented.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solar Thermal and Photovoltaic Systems · solar cell performance optimization · Solar-Powered Water Purification Methods
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. C.G. Granqvist, Spectrally selective surfaces for heating and cooling applications, Tutorial Texts in Optical Engineering, vol. TT1, SPIE Optical Engineering Press, Bellingham, WA, 1989, p. 57.
2. C.E. Kennedy, Technical Report No. NREL/TP- 520-31267 National Renewable Energy Laboratory, Golden, CO, 2002, p. 4.
3. Bogaerts · J. Mater. Sci. · 1983 · 18 · 284710.1007/BF00700767 ↗
4. Peterson · J. Vac. Sci. Technol. · 1975 · 12 · 17410.1116/1.568749 ↗
5. H. Tabor, in: Proceedings of the International Conference on Solar Building Technology, 1977, p. 204.
6. C.M. Lampert, US-DOE Report No. W-7405-ENG-48, 1979.
7. Smith · Sol. Energy Mater. · 1981 · 4 · 11910.1016/0165-1633(81)90036-8 ↗
8. Iyer · Sol. Energy Mater. · 1981 · 6 · 11310.1016/0165-1633(81)90053-8 ↗
9. D.M. Mattox, G.J. Kominiak, R.R. Sowell, R.B. Pettit, SAND 75-0361, Sandia Laboratory, Albuquerque, NM, 1975.
10. B.O. Seraphin, in: Proceedings Symposium on Materials Science Aspects of Thin Film System Solar Energy Conversion, 1974, p. 7.
11. Schneiders · J. Phys. Colloq. CI. · 1981 · 42 · C1
12. Craig · Sol. Energy Mater. · 1981 · 4 · 24510.1016/0165-1633(81)90064-2 ↗
13. Pettit · IBM J. Res. Dev. · 1978 · 22 · 37210.1147/rd.224.0372 ↗
14. Van Der Leij · Proc. Int. ISES Meet. · 1978 · 837
15. Craighead · J. Vac. Sci. Technol. · 1978 · 15 · 26910.1116/1.569568 ↗
16. J.A. Thornton, DOE Report No. DE/AC04/78CS35306, 1979.
17. J.A. Thornton, J.A. Lamb, SERI Final Subcontract Report No. SERI/STR-255-3040, Solar Energy Research Institute, Golden, CO, 1987.
18. Kokoropoulos · Sol. Energy · 1959 · 3 · 1910.1016/0038-092X(59)90003-9 ↗
19. Gillete · Sol. Energy · 1960 · 4 · 2410.1016/0038-092X(60)90004-9 ↗
20. Barrera · Thin Solid Films · 1999 · 346 · 13810.1016/S0040-6090(98)01503-X ↗
21. Barrera · Sol. Energy Mater. Sol. Cells · 2003 · 76 · 38710.1016/S0927-0248(02)00290-8 ↗
22. Avila G. · Sol. Energy Mater. Sol. Cells · 2004 · 82 · 26910.1016/j.solmat.2004.01.024 ↗
23. U. Morales-Ortiz, A. Avila-García, C.V. Lara, Sol. Energy Mater. Sol. Cells, IMRC 2004, Symposium 4 (Available online since May 2005).
24. Karlsson · Proc. Soc. Photo-Opt. Eng. · 1978 · 161 · 161/09
25. B. Karlsson, C.G. Ribbing, Technical Report NSF Contract 3879-1, National Science Foundation, 1977.
26. Smith · Metal Aust. · 1977 · 204
27. Granziera · Met. Aust. · 1977 · 211
28. Evans · Trans. Inst. Met. Finish. · 1972 · 50 · 7710.1080/00202967.1972.11870224 ↗
29. Duffie · 1991
30. Horwitz · Opt. Commun. · 1974 · 11 · 21010.1016/0030-4018(74)90223-5 ↗
31. http://www.ioffe.ru/SVA/NSM/nk/Oxides/Gif/tio2.gif.