IMPACT: A novel device for in-situ thermo-mechanical investigation of materials under concentrated sunlight
Source abstract
Abstract
Abstract A promising route toward affordable and efficient solar energy conversion lies in the development of the high temperature Concentrated Solar Power (CSP) tower. The extreme thermal stress conditions to which the tower receivers may be submitted raise the question of the ability of these components to efficiently perform over extended periods of time. Conventional methods commonly used to assess the mechanical stability and lifetime of these components involve laboratory testing, which suffers from the fundamental inability of these methods to effectively reproduce the real operating conditions. In this work, we suggest an original set-up based upon the use of acoustic emission for in-situ thermo-mechanical investigation of receiver materials exposed to concentrated solar irradiation, named IMPACT (In-situ thermo-Mechanical Probe by ACoustic Tracking). The ability of this set-up to precisely track the nature, the location and the dynamics of mechanical defects in the receiver material is assessed. Implications for future characterization tools aimed at obtaining an in-depth understanding of the thermo-mechanical behaviour of a wide range of materials in real-working operation is also discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solar Thermal and Photovoltaic Systems · Photovoltaic System Optimization Techniques · Silicon and Solar Cell Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Economic implications of thermal energy storage for concentrated solar thermal power10.1016/j.renene.2012.08.013 ↗
2. SBC Energy Institute, Concentrating Solar Power Factbook, no, June 2013.
3. A review of studies on central receiver solar thermal power plants10.1016/j.rser.2013.02.017 ↗
4. Towards standard testing materials for high temperature solar receivers10.1016/j.egypro.2015.03.062 ↗
5. Aging of solar absorber materials under highly concentrated solar fluxes10.1016/j.solmat.2014.01.010 ↗
6. A numerical thermal approach to study the accelerated aging of a solar absorber material10.1016/j.solener.2012.08.007 ↗
7. Accelerated life testing of solar absorber coatings: testing procedure and results10.1016/S0038-092X(00)00034-7 ↗
8. Durability of solar energy materials10.1016/S0960-1481(01)00046-5 ↗
9. Advanced procedure for the assessment of the lifetime of solar absorber coatings10.1016/j.solmat.2004.01.041 ↗
10. Experimental system for long term aging of highly irradiated tube type receivers10.1016/j.solener.2014.04.004 ↗
11. Estimate of thermal fatigue lifetime for the INCONEL 625lCF plate while exposed to concentrated solar radiation10.3989/revmetalmadrid.1038 ↗
12. Life estimation of pressurized-air solar-thermal receiver tubes10.1115/1.4007686 ↗
13. Investigation of the damage behaviour of refractory model materials at high temperature by combined pulse echography and acoustic emission techniques10.1016/j.jeurceramsoc.2008.04.023 ↗
14. Development of generic methodology for designing a structural health monitoring installation based on the acoustic emission technique10.1016/j.procir.2014.07.122 ↗
15. Inspection and structural health monitoring techniques for concentrated solar power plants10.1016/j.renene.2015.07.090 ↗
16. ISO, 12716, Essais non destructifs – contrôle par émission acoustique – Vocabulaire, 2001.
17. Characterization by acoustic emission pattern recognition of microstructure evolution in a fused-cast refractory during high temperature cycling10.1016/j.jeurceramsoc.2010.07.021 ↗
18. V. Carvelli, A. D′Ettorre, S.V. Lomov, Acoustic emission and damage mode correlation in textile reinforced PPS composites, Compos. Struct., 2016.10.1016/j.compstruct.2016.12.012 ↗
19. On the use of acoustic emission to investigate damage mechanisms in glass-fibre-reinforced polypropylene10.1016/0266-3538(94)90171-6 ↗
20. High temperature characterisation of cordierite-mullite refractory by ultrasonic means10.1016/j.jeurceramsoc.2008.02.029 ↗
21. Study of fatigue crack characteristics by acoustic emission10.1016/0013-7944(94)00274-L ↗
22. Acoustic emission monitoring and damage mode discrimination of APS thermal barrier coatings under high temperature CMAS corrosion10.1016/j.surfcoat.2016.06.080 ↗
23. Selection of high temperature materials for concentrated solar power systems: property maps and experiments10.1016/j.solener.2014.09.050 ↗
24. Céramiques réfractaires
25. Acoustic emission energy as a fatigue damage parameter for CFRP composites10.1016/j.ijfatigue.2006.05.009 ↗
26. Acoustic source localization10.1016/j.ultras.2013.06.009 ↗
27. Inhomogeneous deformation twinning measurement using digital image correlation and acoustic emission10.1007/s11340-014-9922-y ↗
28. Acoustic-emission source location in two dimensions by an array of three sensors10.1016/0029-1021(76)90027-X ↗
29. MISTRASGroup Inc, AEwin software user’s manual, no. 609, 2010.
30. Review of high-temperature central receiver designs for concentrating solar power10.1016/j.rser.2013.08.099 ↗
31. A review of studies on central receiver solar thermal power plants10.1016/j.rser.2013.02.017 ↗
32. Thermomechanical behavior of a plate ceramic solar receiver irradiated by concentrated sunlight10.1016/j.solener.2014.08.039 ↗
33. Thermal performances of a high temperature air solar absorber based on compact heat exchange technology10.1115/1.4004356 ↗
34. Numerical investigation of a ceramic high-temperature pressurized-air solar receiver10.1016/j.solener.2013.01.006 ↗
35. Rods and tubes as AE waveguides
36. MISTRAS, Micro80D Sensor – product data sheet., 2011.
37. C. Cavalloni, Patent US5477729A – acoustic emission transducer, 1995.
38. Acoustic emission source location in plate-like structures using a closely arranged triangular sensor array
39. M. Huger, D. Fargeot, C. Gault, High-temperature measurement of ultrasonic wave velocity in refractory materials, in: Proceedings of the 15th Eur. Conference Thermophys. Prop., vol. 34, no. 2, pp. 193–201, 2002.10.1068/htwu115 ↗
40. Characterization of fatigue damage in 304L steel by an acoustic emission method10.1016/j.proeng.2013.12.117 ↗
41. M.-.T. Tran, Approche des mécanismes d′oxydation thermique par l′emission acoustique, Université Grenoble Alpes, 2011.
42. Damage evolution in dynamic deformation of silicon carbide
43. Acoustic emission monitoring of slow strain rate tensile tests of 304L stainless steel in supercritical water environment10.1016/j.corsci.2010.09.006 ↗
44. Frequency as a key parameter in discriminating the failure types of thermal barrier coatings: cluster analysis of acoustic emission signals10.1016/j.surfcoat.2015.01.014 ↗
45. A. Meffre, N. Tessier-Doyen, X. Py, M. Huger, N. Calvet, Thermomechanical characterization of waste based TESM and assessment of their resistance to thermal cycling up to 1000°C, Waste and Biomass Valorization, 2015.10.1007/s12649-015-9431-y ↗
46. Thermal shock resistance of a refractory castable containing andalusite aggregate10.1016/j.ceramint.2016.09.079 ↗
47. 1 – Gas turbines: operating conditions, components and material requirements10.1533/9780857097552.1.3 ↗
48. Thermal shock resistance of ultra-high temperature ceramics under active cooling condition including the effects of external constraints10.1016/j.applthermaleng.2016.09.004 ↗