Organic solar cells with 2-Thenylmercaptan/AU self-assembly film as buffer layer
Source abstract
Abstract
Abstract The interface between an electrode and the organic active layer is an important factor in organic solar cells (OSCs) that influences the power conversion efficiency (PCE). In this report, a buffer layer of 2-thenylmercaptan/Au self-assembly film is introduced into OSCs as a substitute for the poly(3,4-ethylene dioxythiophene):poly(styrene sulfonate) (PEDOT: PSS) layer. The electrode/active layer interface is meliorated by Au-S coordinate bond of self assembly after applying this buffer layer. The series resistance reduces from 20 Ω cm 2 in a device based on PEDOT:PSS to 10.2 Ω cm 2 . Correspondingly, the fill factor (FF) increases from 0.50 to 0.64. Moreover, due to the dipole of this self-assembled layer, the open circuit voltage ( V oc ) also increases slightly from 0.54 V to 0.56 V and the PCE reaches 2.5%.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. For the Bright Future-Bulk Heterojunction Polymer Solar Cells with Power Conversion Efficiency of 7.4%10.1002/adma.200903528 ↗
2. High-performance polymer heterojuction solar cells of a polysilafluorene derivative10.1063/1.2836266 ↗
3. Synthesis, Characterization, and Photovoltaic Propertires of a Low Band Gap Polymer Based on Silole-Containing Polythiophenes and 2,1,3-Benzothiadiazole10.1021/ja806687u ↗
4. High Photovoltaic Performance of a Low-Bandgap Polymer10.1002/adma.200600160 ↗
5. Poltmer solar cells with enhanced open-circuit voltage and efficiency10.1038/nphoton.2009.192 ↗
6. Roles of donor and acceptor nanodomains in 6% efficient thermally annealed polymer photovoltaics10.1063/1.2730756 ↗
7. Efficient Polymer Solar Cells with Nanoscale Control of the Interpenetrating Network Morphology10.1002/adfm.200500211 ↗
8. Three-Dimensional Bulk Heterojunction Morphology for Achieving High Internal Quantum Efficiency in Polymer Solar Cells10.1002/adfm.200900183 ↗
9. Efficiency improvement of blended poly(3-hexylthiophene) and 1-(3-methoxycarbonyl)-propyl-1-phenyl-(6,6) C61 solar cells by nanoimprinting10.1063/1.3117226 ↗
10. Manufacture, integration and demonstration of polymer solar cells in a lamp for the “Lighting Africa” initiative10.1039/b918441d ↗
11. roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies
12. Upscaling of polymer solar cells fabrication using full roll-to-roll processing10.1039/b9nr00430k ↗
13. Fabrication and processing of polymer solar cells: A review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
14. Anode Interfacial Tuning via Electron-Blocking/Hole-Transport Layers and Indium Tin Oxide Surface Treatment in Bulk-Heterojunction Organic Photovoltaic Cells10.1002/adfm.200901045 ↗
15. Degradation of organic solar cells due to air exposure10.1016/j.solmat.2006.06.041 ↗
16. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
17. Lifetimes of organic photovoltaics: Combining chemical and physical characterization techniques to study degradation mechanisms10.1016/j.solmat.2006.04.009 ↗
18. Water-induced Degradation of Polymer Solar Cells Studied by H218O Labeling10.1021/am800039w ↗
19. Oxygen Release and Exchange in Niobium Oxide MEHPPV Hybrid Solar Cells10.1021/cm061429d ↗
20. Research progress on self-assembled monolayers of alkanethiols on metal surface
21. Ultra-thin metal layer passivation of the transparent conductive anode in organic solar cells10.1016/j.solmat.2008.06.016 ↗
22. Influence of the donor/acceptor interface on the open-circuit voltage in organic solar cells10.1063/1.3222975 ↗
23. Enhanced open-circuit voltage in polymer solar cells10.1063/1.3157278 ↗