Morphological characterization and AES depth profile analysis of CuInS2 thin films
Source abstract
Abstract
This work presents results regarding the influence of preparation conditions on the morphological properties and on the chemical composition homogeneity of CuInS 2 (CIS) thin films, grown by a chemical reaction of the precursor species evaporated sequentially on a soda-lime glass substrate, in a two- or three-stage process. The CIS samples were characterized using atomic force microscopy (AFM), scanning electron microscopy (SEM) and Auger electron spectroscopy (AES) depth profile measurements. The results showed that the deposition process and the ratio (evaporated Cu/evaporated In) affect the homogeneity of the chemical composition of the CIS film as well as the grain size. It was found that the samples grown in two stages are inhomogeneous in chemical composition and also Cu-rich near the film surface, probably due to the formation of a secondary Cu 2 S phase in the surface region. The results also revealed that adding a third step in the deposition process improved the homogeneity in the chemical composition of CIS films and helped to remove the Cu 2 S surface layer. The chemical composition of the samples deposited in a three-stage process is homogeneous in the whole volume, whereas the chemical composition in the bulk of samples deposited in a two-stage process is significantly different to that measured in the surface region. CIS films with characteristics found for the former case have demonstrated good properties for its use as absorber layers in thin film solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (9)
Show source-provided references
1. Progress toward 20% efficiency in Cu(In,Ga)Se2 polycrystalline thin films solar cells10.1002/(SICI)1099-159X(199907/08)7:4<311::AID-PIP274>3.0.CO;2-G ↗
2. L. Frantzis, E. Jones, C. Lee, M. Wood, P. Wormser, Opportunities of cost reductions in photovoltaic modules, in: Proceedings of the 16th European Photovoltaic Solar Energy Conference, Glasgow, UK, 2000, pp. 2100–2103.10.4324/9781315074405-9 ↗
3. N. Meyer, I. Luck, U. Rühle, J. Klaer, R. Klenk, M.C. Lux-Steiner, R. Scheer, Towards thin film module production using a simplified CIS process, in: Proceedings of the 19th European Photovoltaic Solar Energy Conference, Paris, France, 2004, pp. 1698–1701.
4. Improved performance of thin films solar cells based on Cu(In,Ga)S210.1016/S0040-6090(02)00554-0 ↗
5. D. Braunger, Th. Dürr, D. Hariskos, Ch. Köeble, Th. Walter, N. Wieser, H.W. Schock, Improved open circuit voltage in CuInS2 based solar cells, in: Proceedings of the 25th IEEE Photovoltaic Specialist Conference, Washington, 1996, pp. 1001–1004.10.1109/PVSC.1996.564300 ↗
6. In2O3/DCS/CuInS2 thin films solar cell with 9.7% efficiency10.1143/JJAP.33.L1775 ↗
7. Efficient CuInS2 solar cells from a rapid thermal process (RTP)10.1016/S0927-0248(00)00276-2 ↗
8. E. Ennaoui, M. Baer, M. Rusu, R. Lenk, J. Klaer, T. Kropp, R. Sáez, H.W. Schock, M.C. Lux-Stainer, Hihgly efficient CuInS2-based solar cells devices with an optimized Cd-free window structure, in: Proceedings of the 21st European Solar energy Conference, Dresden, Germany, 2006, pp. 1835–1838.
9. R. Nuofi, Y. Yan, J. Abu-Shama, K. Jones, M Al-Jassin, B. Keyes, J. Alleman, K. Ramanathan, Investigation of the microstructure of Cu(In,Ga)Se2 thin films used in high-efficiency devices, in: Proceedings of the 29th IEEE IEEE Photovoltaic Specialist Conference, New Orleans, 2002, pp. 508–510.10.1109/PVSC.2002.1190613 ↗