journal article·2015-09

Passivated contacts to laser doped p+ and n+ regions

Xinbo Yang, James Bullock, Lujia Xu, Qunyu Bi, Sachin Surve, Marco Ernst, Klaus Weber

Publisher page

Abstract

In this work, tunnel SiO2/a-Si:H stacks are trialed as passivated contacts to laser doped p+ and n+ regions. The passivation performance and contact resistivity are investigated as a function of the tunnel SiO2 thickness and annealing condition. We find that the SiO2/a-Si:H stack provides excellent passivation to laser doped n+ regions, with corresponding low recombination current density (Jo) values. A lower level of surface passivation is achieved by the SiO2/a-Si:H stack on laser doped p+ regions. A post-deposition forming gas anneal (FGA) at 400 °C is found to improve the passivation performance to laser doped p+ regions and deteriorate the passivation to laser doped n+ regions. Acceptable contact resistivity (ρc) values have been obtained for both laser doped n+ and p+ regions after aluminum metallization and a post FGA to activate the alloying process between the a-Si:H and aluminum layer. In the final part of this work implementation of the passivated contacts to laser doped regions into a simplified interdigitated back-contact (IBC) solar cell fabrication process is proposed. Simulation result suggests that IBC device with an efficiency of up to 23% can be achieved using the obtained experimental results.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. 24.5% efficiency silicon PERT cells on MCZ substrates and 24.7% efficiency PERL cells on FZ substrates10.1002/(SICI)1099-159X(199911/12)7:6<471::AID-PIP298>3.0.CO;2-7 ↗
2. Back-contact solar cells: a review10.1002/pip.657 ↗
3. Influence of laser damage on the performance of selective emitter solar cell fabricated using laser doping process10.1016/j.solmat.2014.08.021 ↗
4. Incorporation of deep laser doping to form the rear localized back surface field in high efficiency solar cells10.1016/j.solmat.2014.06.037 ↗
5. PassDop rear side passivation based on Al2O3/a-SiCx: B stacks for p-type PERL solar cells10.1016/j.solmat.2014.05.001 ↗
6. Over 700mV implied Voc on p-type CZ silicon solar cells with double-sided laser doping10.1016/j.egypro.2013.05.037 ↗
7. Laser processing of Al2O3/a-SiCx:H stacks: a feasible solution for the rear surface of high-efficiency p-type c-Si solar cells10.1002/pip.2207 ↗
8. Add-on laser tailored selective emitter solar cells10.1002/pip.1007 ↗
9. 18.7% Efficient laser-doped solar cell on p-type Czochralski silicon10.1063/1.3515866 ↗
10. Laser-fired rear contacts for crystalline silicon solar cells10.1002/pip.422 ↗
11. 22.0% Efficient laser doped back contact solar cells10.1016/j.egypro.2013.07.274 ↗
12. Laser induced lifetime degradation in p-type crystalline silicon10.1063/1.4725191 ↗
13. Influence of laser power on the properties of laser doped solar cells10.1016/j.solmat.2010.12.006 ↗
14. Quantitative surface recombination imaging of single side processed silicon wafers obtained by photoluminescence modelling10.1016/j.egypro.2014.08.075 ↗
15. M.A. Green, A.W. Blakers, N.R. Willison, T. Szpitalak, E.M. Keller, E. Gauja, P.J. Bart, The MINP solar cell – a new high voltage, high efficiency silicon solar cell, in: Proceedings of the 15th IEEE Photovoltaics Specialist Conference, 1981, pp. 1405–1408.
16. K. Jäger-Hezel, W. Schmidt, W. Heit, K.D. Rasch, Improved large area MIS-contacted silicon solar cells, in: Proceedings of the 13th European Photovoltaic Solar Energy Conference, 1995, pp. 1515–1518.
17. A. Metz, R. Hezel, Recorded efficiency above 21% for MIS-contacted diffused junction silicon solar cells, in: Proceedings of the 26th IEEE Photovoltaics Specialist Conference, 1997, pp. 283–286.10.1109/PVSC.1997.654084 ↗
18. Passivation of a metal contact with a tunneling layer10.1016/j.egypro.2012.05.010 ↗
19. Silicon passivation and tunneling contact formation by atomic layer deposited Al2O3/ZnO stacks10.1088/0268-1242/28/8/082002 ↗
20. Passivation of aluminium-n+ silicon contacts for solar cells by ultrathin Al2O3 and SiO2 dielectric layers10.1002/pssr.201308115 ↗
21. Amorphous silicon passivated contacts for diffused junction silicon solar cells10.1063/1.4872262 ↗
22. J. Bullock, A. Cuevas, D. Yan, B. Demaurex, A. Hessler-Wyser, S. De Wolf, Passivated contacts to n+ and p+ silicon based on amorphous silicon and thin dielectrics, in: Proceedings of the 40th IEEE Photovoltaic Specialist Conference, Denver, USA, 2014, pp. 3442–3447.10.1109/PVSC.2014.6925674 ↗
23. Amorphous silicon enhanced metal–insulator–semiconductor contacts for silicon solar cells10.1063/1.4900539 ↗
24. Efficient Si solar cells by low-temperature solid-phase epitaxy10.1063/1.92878 ↗
25. Aluminium‐induced crystallization and counter‐doping of phosphorous‐doped hydrogenated amorphous silicon at low temperatures10.1063/1.362425 ↗
26. Low-temperature formation of local Al contacts to a-Si:H passivated Si wafers10.1002/pip.522 ↗
27. Simple silicon solar cells featuring an a-Si:H enhanced rear MIS contact10.1016/j.solmat.2015.02.030 ↗
28. High efficiency n-type silicon solar cells featuring passivated contact to laser doped regions10.1063/1.4915326 ↗
29. Contactless determination of current–voltage characteristics and minority‐carrier lifetimes in semiconductors from quasi‐steady‐state photoconductance data10.1063/1.117723 ↗
30. Obtaining the specific contact resistance from transmission-line model measurements10.1109/EDL.1982.25502 ↗
31. Photoluminescence imaging of silicon wafers10.1063/1.2234747 ↗
32. Doping profile analysis in Si by electrochemical capacitance‐voltage measurements10.1149/1.2044101 ↗
33. D.E. Kane and R.M. Swanson, Measurement of the emitter saturation current by a contactless photoconductivity decay method, in: Proceedings of the 18th IEEE Photovoltaic Specialist Conference, Las Vegas, USA, 1985, pp. 578–583.
34. 3-D simulation of interdigitated-back-contact silicon solar cells with Quokka including perimeter losses10.1109/JPHOTOV.2014.2320302 ↗
35. Excellent passivation of highly doped p-type Si surfaces by the negative-charge-dielectric Al2O310.1063/1.2784168 ↗
36. Surface recombination velocity of phosphorus-diffused silicon solar cell emitters passivated with plasma enhanced chemical vapor deposited silicon nitride and thermal silicon oxide10.1063/1.1350633 ↗
37. Polysilicon emitters for bipolar transistors: a review and re-evaluation of theory and experiment10.1109/16.141239 ↗
38. An investigation of the thermal stability of the interfacial oxide in polycrystalline silicon emitter bipolar transistors by comparing device results with high-resolution electron microscopy observations10.1063/1.338861 ↗
39. J.Y. Gan, R.M. Swanson, Polysilicon emitters for silicon concentrator solar cells, in: Proceedings of the 21st IEEE Photovoltaic Specialist Conference, USA, 1990, pp. 245–250.10.1109/PVSC.1990.111625 ↗
40. A simple model describing the symmetric I–V characteristics of p polycrystalline Si/n monocrystalline Si, and n polycrystalline Si/p monocrystalline Si junctions10.1109/JPHOTOV.2014.2310740 ↗
41. Imaging of the relative saturation current density and sheet resistance of laser doped regions via photoluminescence10.1063/1.4817525 ↗
42. Design, fabrication and characterisation of a 24.4% efficient interdigitated back contact solar cell
43. Characterisation of laser-doped localised p-n Junctions for high efficiency silicon solar cells10.1109/TED.2014.2318714 ↗
44. Improved quantitative description of auger recombination in crystalline silicon10.1103/PhysRevB.86.165202 ↗